How do you backfill around a window well?

Use free-draining gravel or 3/8″ pea-stone. Fill the bottom of the window well and stay at least 4 inches below the bottom of the window. Backfill the outside of the well slowly and evenly to prevent damage to the well. Fill within 6 inches from the final grade.

How do you keep a window well covered in place?





Quote from the video:
Quote from Youtube video: Exactly where we will have these perforated uh so that the screws go through and lastly you have a hammer that will put the anchors into the drum cement.

How do you cover a basement window well?

Quote from the video:
Quote from Youtube video: Everything out and painting will protect the wood whether you use stain or exterior paint to build the frame clamp down the side pieces to the straight back piece of wood.

How do you fill a window with concrete blocks?

Quote from the video:
Quote from Youtube video: So the holes in the block are sitting on the motor bed and the end face of the block with the mortar on it's pressed against the side wall of the opening tap the block in so it's seated solidly.

How deep should rock be in window well?

Fill the window well until the pea gravel layer is approximately 4 to 5 inches deep.

What kind of rock goes in window wells?





crushed gravel

One material often used to help with drainage at the bottom of window wells is small rocks or crushed gravel.

Should window well be attached to foundation?

A properly designed and installed window well will be sized appropriately for the window, bolted securely to the foundation wall and feature a functioning drain that carries water into a drain tile system or out to daylight. If any of these features are missing or compromised, the window well is likely to flood.

Do I really need window well covers?

Window well covers are also important for the safety of you and your family. Without a cover, a misstep can cause people or pets to fall into the well, risking potentially serious injury.

How do you keep water out of window wells?



Here’s what you can do to keep as much water away from your house as possible:

  1. Fix grading to make sure it slopes away from the foundation.
  2. Keep your gutters clear of debris and in good working condition. …
  3. Extend downspouts away from the house to keep roof runoff from pouring next to the foundation.


How do you frame a window in a cinder block wall?

Quote from the video:
Quote from Youtube video: Shims. Check the window placement within the wall by measuring from the interior surface of the window or jamb extension to the interior surface of the wall. The measurement should be consistent.

How do you install an egress window in a block foundation?



Quote from the video:
Quote from Youtube video: Off you can see the lines on both sides we're gonna be using this hydraulic ring saw to cut through the block. And then they'll use a sledgehammer to knock it out Wow.

How do you frame a window in concrete?

In a concrete wall without wood framing, install the window framework by fastening it into the concrete wall with self-tapping concrete screws. For a block wall installation, fasten with rust-resistant screws using a toe-nail method through the jambs into the head and sill boards at each corner.

How many inches of gravel do I need for a window well?

Fill the Well with Gravel



Pour a two to three-inch layer of gravel at the bottom of the window well. Use your shovel to pack the gravel down and shift it around if it isn’t properly even. If the gravel reaches your windowsill, it’s too high.

Should window wells be filled with gravel?

Backfilling is a vital part of most egress window well installations. After digging out the hole to install your well, you fill it with gravel or broken rock chunks to support the window well itself, improve drainage and prevent damaging frost heaves in the winter.

Should I put pea gravel in my window wells?



For valid product warranty, Window Wells must be installed with the Marflex installation kit and in accordance with the current Marflex installation instructions. Use pea gravel or ¾ inch or smaller free-draining rock, around the well stopping approximately 1 foot down from the top of the window well.

Does a window well need a drain?

Window Well Drain – Every window well should have a drain to allow water to exit the window well and not build to a level that creates a basement seepage problem. Drains can be connected to interior or exterior drain tile or can be run to daylight where a proper slope exists.

Should window wells be sealed?

Quote from the video:
Quote from Youtube video: And anything that could be potentially clogging your window well drain.

What do you fill window wells with?

Filling in Around the Well. Fill the bottom 2–3 in (5.1–7.6 cm) of the window well with gravel. Pour the gravel around the inside and outside of your window well, and pack it down with the bottom of your shovel. Spread the gravel evenly over the area so you have a 2–3 in (5.1–7.6 cm) layer at the bottom of the hole.

Do egress windows leak?



Egress windows that are not properly sized for the space available are likely to suffer water leakage especially when the liner is detached from the wall. Ensure that you get the window professionally installed for the best results.