Should I use 6×6 for gate posts?

If your gates are wooden, they will sag1. Even if your gates are metal, they may sag. I would recommend 6×6 if you can manage to find a friend, but I would also recommend you sink them 3ft into the ground if they’re 6ft tall above ground.

What size post should I use for a gate?





Post size: As a rule of thumb for free-standing posts, use 100mm x 100mm (4″ x 4″) lumber for narrow gates up to 1200mm (4ft) high, use 125mm x 125mm (5″ x 5″) posts for narrow gates 1800mm (6ft) high, and use at least 150mm x 150mm (6″ x 6″) posts for wide gates.

Is 6×6 better than 4×4 fence posts?

4×4 is the standard. And if you do it as a privacy fence, 6×6 posts stand out and make it look more substantial. I wouldn’t want it either. If you’re doing a “good neighbour” style fence you can use 6×6’s nicely.

How do you build a 5 foot fence gate?

Quote from the video:
Quote from Youtube video: Continue this process all the way around the rectangle. Until you have attached the corner brace in every single corner. Next you want to add a diagonal 2×4 in the middle for some extra stability.

What size post do I need for a 6ft gate?

What size post for a 6 foot gate:- as per thumb rules and guidelines, for a 6 foot wide gate use 4″ × 4″ (100mm x 100mm) lumber/ wood post size for narrow gates up to 6 feet (1800mm) high. Thus you will need 4″×4″ size of wooden post for a 6ft wide gate.

Can I use a 4×4 for a gate post?





Quote from the video:
Quote from Youtube video: I used a 4×4 post alright so here's the thing you probably should not use a 4×4 post for a 12-foot gate.

How deep should a 6×6 post be?

three feet

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

How deep do gate posts have to be?

Allow a week or two for the concrete to harden up property before hanging a gate. If the ground is very firm posts need only go 500mm (20″) in the ground. If the ground is very wet, sandy or soft the post must go much deeper normally at 1.2m (4′) or where ever the ground becomes drier and harder.

How high should a gate be off the ground?



Bottom Clearance:



A clearance of 3” – 6” under a gate is acceptable however 4” – 5” is optimal for appearance. A gate that is too high off the ground will have a floating look to it. One that is too close to the ground will feel more like a fence than a gate.

How wide should a fence gate be?

Your front house door is no bigger than 36″ so a minimum of 36″ wide gates should be used. Your appliance will not fit through the gate that you want in the house. A driveway should have 12′ minimum clearance through the gate.

How much space should be between post and gate?

Allow 4.5 to 5 inches between the post and gate for hinges and pins.

How wide can you make a wooden gate?



A single gate should not be built much wider than 42 inches, or 3.5 feet. A wider gate will lower the angle of the cross-brace and the gate will sag as described above. To ensure a cross-brace angle of greater than 45 degrees, the door height must be greater than the width.

How do you build a 4 foot wide wooden gate?

Quote from the video:
Quote from Youtube video: And making multiple slits. And then using a chisel to cut out the excess. So you can see the result of thinning out half of the boards that way whenever you put them together.

What is standard gate width?

Driveway gates are usually 10 to 12 feet wide to fit cars, large rideable lawnmowers and even farm equipment. Larger gates that are meant to accommodate incoming and outgoing traffic can be about 18 feet wide.

How wide should a garden gate be?

The standard size of a garden gate is a height of 3 to 6 feet and a width of 3 to 4 feet. (This assumes a single gate, but a double gate can be wider – more on this later). What is this? A standard garden gate is 3 to 6 feet tall and 3 to 4 feet wide.

How do I determine my gate size?



Simply measure the distance between the walls (the gap size) and this will give you your ordering size. When taking measurements we strongly recommend that you measure the opening in 3 places (top, middle and bottom). Should there be a deviation in size we suggest you use the smallest width for ordering purposes.

What is a standard size gate for a driveway?

between 12 and 24 feet wide

Most standard driveway gates are between 12 and 24 feet wide. That said, driveway gates for residential properties typically range between nine and 12 feet but can also be larger or smaller, depending on your property size.

How do I choose a driveway gate?

7 Things to Consider for Your Custom Driveway Gate

  1. Consider What Design You Want for the Gate. …
  2. Consider the Level of Privacy You Want the Gate to Create. …
  3. Consider the Gate’s Height. …
  4. Consider How You Want the Gate to Open. …
  5. Consider Your Gate Materials. …
  6. Consider Having the Gate Alarme.