Why will my washer agitate but not spin?
If your washer won’t agitate but spins, a broken agitator may be to blame. The agitator is the centerpiece in a top load washer that agitates and moves the clothes through the water during the wash cycle. The output shaft of the transmission is splined to the agitator to secure it in place.
How do you fix a washing machine that will not spin?
How To Fix A Washer That Won’t Spin
- Lighten the load inside the washer. …
- Rebalance the load in the washing machine. …
- Check or repair the washing machine drain hose. …
- Check for blown fuses. …
- Check the washing machine lid safety switch. …
- Replace the drive belt in your washing machine. …
- Replace the motor in your washing machine.
Why is my washing machine not spinning out my clothes?
If your washer will not spin out all water and clothes are still wet, the drain pump might be clogged with debris or possibly faulty. There could be a foreign object that is stuck in the pump and inside the drain hose. Check these areas and remove anything that may be clogging the draining system on your washer.
How do you tell if your agitator is broken?
The agitator should start to oscillate back and forth, mixing up the clothes in the water. If the agitator does not move, double check that the sensor is depressed. If it still does not move with the sensor depressed, the agitator is broken and should be repaired.
How do I know if my washing machine agitator is bad?
Quote from the video:
Quote from Youtube video: If they're worn out the coupling will spin freely on the shaft. And the washer won't agitate. If that's the case you'll need to replace it.
How much does it cost to replace a washing machine agitator?
On average, expect to spend $350 to $575 for washing machine agitator replacement. A broken agitator in a washer is a significant fix. If the agitator is broken, the clothes will not oscillate back and forth.
Why is my top loader not spinning?
If the belt mechanism is loose or slipped or the belt is damaged, it may not be spinning with enough force. If the belt is broken or fully off the rollers, then it won’t spin at all. A washer that won’t spin isn’t washing. If it can’t agitate clothes, then clothes don’t get clean.
Why is the agitator not working?
Your washer may not be agitating due to worn-out directional cogs. Check to see if your machine’s agitator has two parts, allowing it to move the water left or right. If it does, and the cogs are damaged, the upper part of the agitator won’t properly connect to the bottom part.
How much does an agitator cost?
One reason is their cost. “They’re often your least expensive type of washer, typically about $450 and up,” says Mark Allwood, a senior market analyst at CR. Almost half the agitator top-loaders in our washing machine ratings sell for $675 or less.
How do I know if my washing machine clutch is bad?
If the tub does not rotate, it indicates that the clutch is broken. Listen to the spin action of the washer. If you hear intermittent slowing of the wash or spin cycle accompanied by a change in motor humming, it indicates that clutch may be broken or worn out.
Can a washing machine clutch be repaired?
To remove the motor, you only need to use the 1/2 socket and remove the three bolts holding the assembly to the frame. once those are removed you will be able to slide the entire assembly out. Now that the clutch is accessible, you will be able to replace the worn out parts.
How do you fix a worn clutch on a washing machine?
Quote from the video:
Quote from Youtube video: Use a half-inch socket to remove the bolts attaching the gear case to the base. Now carefully pull the motor and gear case assembly out remove the thrust washer from the gearcase shaft.
How do you test a washing machine transmission?
Quote from the video:
Quote from Youtube video: But once we put it in spin cycle. And you can do this in agitation. Also we just have to fill up the the tub with. Water. You can hear that transmission clicking.
What’s the average life of a washing machine?
Washing machines, on average, last around 10 years, according to Consumer Reports. If your washer is reaching the threshold, or it’s been having some problems, here are some signs the end may be near.
