Try resetting the thermostat by first bringing it down to zero. Wait for a couple of minutes and take it to the desired temperature. Hopefully, your water heater not working after power outage should be resolved. If this does not work, the chances are that you may have to replace the thermostat itself.
What causes a water heater to not light?
Over time, thermocouples can malfunction, accumulate dust buildup, or the device can get bent away from the pilot light’s flame. In either case, the thermocouple will struggle to sense the pilot light and stop the gas supply.
How do you reset the pilot light on a water heater?
Youtube quote:Light if it did light just continue to hold the gas control knob until you see the indicator. Light on the right side of the valve. Blink. Once it blinks you can release the knob.
Do all electric water heaters have a reset button?
Somewhere on your electric water heater, you’ll find a reset button. It’s usually red and often located near the thermostat. It may also be hidden behind a removable metal panel on the unit—and then behind some insulation.
How do you reignite a water heater?
Youtube quote:Turn. The control knob to the pilot. Position immediately hold a match to the end of the private light too while pressing the reset button on the control. After you see that you have a flame.
Why would pilot light go out?
Improper Venting & Airflow
Sometimes a pilot light can go out as a result of some source of wind or air simply blowing it out. If this happens, there could be an issue with how your flue pipe is set up or how your system is venting.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Is there a reset button on gas water heater?
The reset button is often red and located near the thermostat or behind a metal panel that is removable on the unit. When you find it, push the reset button and then release it. There may be a lower thermostat button also known as a second reset button.
How do you check the pilot light on a water heater?
It’s usually right on the panel. Turn and hold the knob to “Pilot” and push the ignitor. You should hear it click, and probably also a “whooshing” sound. Check in that gap, and you should see the light on.
How do you restart a gas water heater?
Youtube quote:Once the pilot is lit continue to depress the pilot button for approximately. One minute release the pilot button and the pilot should stay lit if it does not stay lit.
Is it safe to relight water heater pilot?
Most homeowners can relight a pilot light themselves without any issue, but it’s important to be safe when dealing with a gas-powered hot water heater. You should always proceed with care when relighting a pilot light, since the gas used to power your hot water heater is flammable and potentially dangerous.
Does electric water heater have pilot light?
There’s no gas or pilot light involved in electric water heaters. If the power to your electric water heater is off, you may have an electrical issue requiring professional assistance.
Can you manually light a water heater with electronic ignition?
* Caution: Most modern water heaters no longer use standing pilots. They use electronic ignition to ignite the gas. Do not attempt to manually light an electronic ignition system.
Can I manually light my gas water heater?
Lighting a water heater is simple, no matter what type you have. Most newer models of gas water heaters have a simple ignition switch. In just a few steps the water heater is lit, no problem. If you’ve moved into an older house, though, you many have the kind of water heater that needs to be lit manually.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
How much does it cost to relight a water heater?
A plumber can help reignite the pilot light. They will charge you an hourly fee of $40 to $150. This is usually a fairly brief project, and may just take an hour.
What happens if water heater pilot light goes out?
If it senses that the pilot light has gone out, the thermocouple shuts off the gas supply to the flame in order to prevent safety issues with your water heater. Over time, thermocouples can begin to malfunction and shut off the gas supply to the pilot light even if it’s burning properly.
How many years does a water heater last?
about eight to 12 years
Based on the manufacturer’s suggested service life, the life expectancy of a water heater is about eight to 12 years. That varies with the location and design of the unit, quality of installation, maintenance schedule and water quality.
