When your weed trimmer will not stay running, run through the basic troubleshooting steps to get it working again. The machine may have run out of gas, which is easy to fix, but the problem may also be a maladjusted carburetor, which is also fairly easy to fix. It’s also a good idea to clean or replace the air filter.
Why won’t my weed wacker keep running?
Most weed eaters will have a small air hole available on the cap to the gas tank – This lets air into the tank to help prevent any vacuum from forming. An easy way to check if your air hole is clogged is to simply loosen the cap while the trimmer is running – If performance improves, a replacement gas cap is your fix.
Why is my weed wacker stalling?
Quote from the video:
Quote from Youtube video: Over time the arrestor can become clogged with soot which may cause the trimmer engine to stall. You can try cleaning the arrestor with a wire brush. But you may need to replace it with a new.
How do you troubleshoot a weed wacker?
If it is empty or low, the weed eater will not start. If there is enough fuel and it is fresh, lightly shake and swirl the weed eater to ensure that oil and gasoline are not separated. If you are using the weed eater for the first time after several months, you should swap the old fuel for a new mixture.
Why does my weed wacker only run on choke?
Why Does My Weed Eater Only Run on Full Choke? (The Short Answer) The main reason why a weedeater only runs on full choke is because of issues with the air and fuel supply due to a dirty carburetor, a bad gas cap vent, or a clogged fuel filter.
How do you Unflood a weed wacker?
Place an adjustable wrench on the spark plug and turn it counterclockwise to loosen it. Pull the spark plug straight out of the Weed Eater. On a flooded engine, the spark plug is damp on the bottom and smells strongly of gasoline.
What can I do with a broken weed wacker?
Look for a recycling center in your area or contact a junk removal company Raleigh. Weed Eaters – If your electric weed eater is not functioning correctly, check the cord because a frayed power cord is the most common cause for weed eaters to not function.
Why does my trimmer dies when I give it gas?
Why does my weed eater die when giving it gas? The most common causes of a weed eater dying when throttled are fuel issues, insufficient air intake, or problems with the exhaust. You should follow the path that the fuel travels to identify the issue.
How do you adjust a weed eater carburetor?
Quote from the video:
Quote from Youtube video: On these weed eaters is that the high screws here low screws there you adjust this screw here at high speeds revving your machine up this one here you adjust it when it's idling.
How long to wait if weed eater is flooded?
If you flood your car’s engine, you often have no recourse but to wait 10 or 20 minutes for the gas to drain from the carburetor before the engine will start, but that isn’t necessary with a string trimmer. A simple procedure should get the engine going without any delay at all.
Why won’t my Homelite weed wacker start?
Common solutions for: Homelite String trimmer won’t start. Inspect the spark plug for signs of wear or damage. If the porcelain insulator is cracked, an electrode is burned away or damaged, or there is heavy carbon buildup at the electrode, replace the spark plug.
Why is my gas weed eater not starting?
Quote from the video:
Quote from Youtube video: The spark arrestor is a small screen that keeps sparks emitted by the engine from exiting the muffler. Over time the arrestor can become clogged with soot which may prevent the trimmer edge from
How do you start a weed wacker?
Quote from the video:
Quote from Youtube video: Step two is to move the blue choke lever to the number one position step three is to squeeze the throttle for the next three steps. Step four is to pull the pull rope five.
How much compression should a weed eater have?
Weed trimmers, like lawnmowers, require fewer pounds per square inch to operate than do heavier machines so they fall into the 60 to 80 psi range. If a weed trimmer has at least 60 lb. of pressure, the engine will still start, but anything less will not create enough power to turn the engine over.
How do I know if my weed eater has compression?
Symptoms of low compression include hard starts, erratic idling and low power when the engine heats up. Checking the compression on a Weed Eater requires a special tool called a compression gauge. Unhinge the black rubber boot from the tip of the spark plug, usually on the top or side of most Weed Eaters.
How do you pressure test a weed wacker?
Quote from the video:
Quote from Youtube video: And what you need to do is locate the fuel line in your chainsaw that goes to the fuel filter some chainsaws will have more than one line sometimes the second line is for the primer.
