How do I reset my well pump?
Hold the reset lever in the start position until the pressure builds up and the gauge reads over 40 PSI; then let it return to the AUTO position. The pump should now run on its own and continue until the pressure reaches the cut out setting, (usually between 50 – 60 PSI), and then shut off.
Why is my well pump not kicking on?
Check Your Breaker Box
Your well pump may have stopped working due to lack of power. Sometimes resetting a breaker or replacing a fuse affected by a power surge or brownout can fix this. If the well pump circuit breaker has tripped, the well pump itself may be failing.
How do I turn my well pump back on?
Using your insulated pliers, in case of stray electrical current, lift the lever upward. You should hear the pump kick on. Hold this lever in the upward position until you notice the pressure gauge get up to above 30 or so. Now if you turn it loose the pump should stay on and you are back in business.
Why is my water pump not pumping?
Start by checking that the well switch located near your pressure tank hasn’t been switched off. Then check the well’s double-pole circuit breaker to see that it hasn’t tripped. If it has, reset it. A breaker that keeps tripping likely means a problem with the well pump, and you’ll need to call a pro for that.
How do I reset my well pump after a power outage?
Some pressure switches may need to be reset after a power outage. This is usually an easy task and all you need to do is turn the lever to “auto” and hold it until the pump turns on and the pressure gauge reads 30psi.
How can you tell if your well pump is bad?
How To Tell If Your Well Pump is Going Bad
- 1) Decrease in Water Pressure. …
- 2) Air Spitting From the Faucet. …
- 3) Pumping Sand or Sediment. …
- 4) Water Quality Change. …
- 5) Water Pump Cycles On and Off Constantly. …
- 6) Loud or Unusual Noises. …
- 7) High Electric Bills.
Why would my water just stop working?
If you’re not getting any water in your home, it’s likely because of a problem with the water main. If you have an emergency shut-off valve, it could have accidentally triggered and stopped your water flow, or the valve could be open and impeding your water supply because it’s leaking.
Why is my well not working?
Check the circuit breaker connected to the well and see if there is a short in the system. If your well pump stopped working after a thunderstorm, check to see if the well was struck by lightning. If there is a short or surge in the power to your well, the circuit might have blown.
What causes no water when you have a well?
If you are experiencing no water from the well, there can be many low water pressure causes, including a failing well pump, stuck check valve, partially closed or bad gate/ball valve and leaking/failing pressure tank.
Why is my well pump not building pressure?
The water pump may have suffered internal damage to a seal, bearing, or impeller. The motor will keep running but the pump is unable to develop normal pressures. “Damage” may include a broken impeller blade, scale or debris clogging the impeller or other pump components, or a failing pump seal or bearing.
Why is my well pump 0 psi?
Check your pressure gauge – if it’s fine, you may have clogged filters or a supply line issue. If the pressure reads zero, it’s a safe bet that no water is coming in from your well pump. That might be an electrical issue (check the well pump breaker), or it might be a problem in the pressure switch.
