Concrete patios with minor damage, but in otherwise good condition, can be transformed with concrete resurfacing. Instead of starting over with a new patio, you can upgrade its appearance and strength with a cement-based overlay. Your resurfaced concrete patio can be stamped, stained, or stenciled and have color added.
How can I cover my concrete patio cheaply?
Physical Cover-Ups
They’re cheap, can be swapped out in case you get bored of them, and look great when paired with outdoor seating, planters, torches, and more. An outdoor rug is a great cheap option for covering up a concrete patio. [Source] Another great-looking option is installing some interlocking hardwood tiles.
What can I resurface concrete with?
CONCRETE RESURFACING OPTIONS
- Stamped concrete overlays.
- River rock or pebble coating.
- Cool deck finishes.
- Epoxy coatings with color flakes or metallic pigments (garages)
- Spray down texture coatings.
- Broom finish applications.
- Integral or topically applied color.
- Stenciled patterns or hand carved designs.
What can I put over my old concrete patio?
Take a look at all of these fabulous concrete patio ideas.
- Paint a Pattern. Yes, you can paint your concrete slab. …
- Lay Decking Flooring. Did you know you can lay decking over a concrete slab? …
- Add Curves With Pavers. …
- Lay Slate Tiles. …
- Stain the Concrete to Look Like Tile. …
- Add a Beautiful Outdoor Rug. …
- Paint Concrete. …
- Dress it Up.
How can I make my cracked concrete patio look better?
The best product for sealing and repairing cracks is a flexible caulk-based product like Quikrete Concrete Repair. This acrylic-based caulk is matte gray, textured to blend in with surrounding concrete. All it takes to apply this product is a caulk gun and a utility knife to cut the tip.
How do you resurface a concrete patio?
Quote from the video:
Quote from Youtube video: Before resurfacing your slab deeply spalled areas and large cracks should be repaired using concrete resurfacer that has been mixed to a triable consistency.
Is painting a concrete patio a good idea?
Concrete outdoor surfaces can face a lot of wear and tear over time, but a fresh coat of paint can provide a welcome makeover. The best concrete paint or stain conceals discolorations and signs of damage while providing a protective coating that extends the life of the surface.
Can you put a thin layer of concrete over concrete?
Yes, you can put new concrete over old concrete providing there are no issues such as significant cracks of frost heaves with your existing concrete. A new layer of concrete should be about two inches to ensure an even, strong coverage.
How do I make concrete look new?
3 Ways to Make Old Concrete Look New Again
- Power Wash. Over time, your concrete will accumulate grime and dirt. …
- Resurface. If you’re looking for a quick and easy way to improve your curb appeal, resurfacing your concrete steps and driveway is a great way to start. …
- Add Stain or Sealing Coats. …
- Revive Your Old Concrete.
What is a resurfacer?
1. ( Tools) a machine or tool used for resurfacing. 2. ( Building) a machine or tool used for resurfacing.
Can cracked concrete be resurfaced?
Concrete resurfacing to cover larger cracks or surface problems. Large cracks or holes greater than ¼”, spalling (horizontal peeling or chipping of the surface), and discoloration can be covered with resurfacing or a concrete overlay (a thin layer of cement-based material applied directly over the existing concrete).
Can you fix cracked concrete patio?
If your driveway, patio or other concrete surface has cracks, they can often be repaired. In some cases concrete crack repair can be a simple DIY project, in others it may require a professional concrete contractor to correct the damage and in the most extreme cases your concrete may need to be removed and replaced.
How do you apply concrete resurfacer?
Pour the QUIKRETE® Concrete Resurfacer and simply apply the Concrete Resurfacer using a long handled squeegee. Saturate the surface with water then remove any standing water from low places. Next, simply pour then spread with a long handled squeegee. Use the squeegee to scrub the material into the surface.
Does concrete resurfacer really work?
That begs the question, “does concrete resurfacing last?” The short answer is, “yes.” If there are no issues with the underlying foundation the resurfacing agent pours onto, then the new material will last. It bonds to the foundation, creates a seal, and leaves you with a brand-new concrete driveway.
Can you skim coat concrete patio?
Repair and renew concrete surfaces by skim coating them rather than demolishing and starting anew. Skim-coating or resurfacing concrete patios, walkways, driveways, walls and stairs not only renews their appearance, but it extends their lifespan by improving drainage and waterproofing.
How thick can you pour concrete resurfacer?
1 Unlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for compressive strength of about 4,500 psi.
How many square feet does a 40 lb bag of concrete resurfacer cover?
One 40 lb (18.1 kg) bag of Concrete Resurfacer will cover approximately 17 ft2 (1.6 m2) of surface at a thickness of 1/4 in (6.4 mm) or approximately 90 ft2 (8.4 m2) per bag when applied at the minimum thickness with a broom or squeegee.
How long does concrete need to cure before resurfacing?
Continue moist curing for 24 to 48 hours prior to use. Under normal conditions, no special curing is required. Wait 24 hours before allowing foot traffic on the surface.
How long does a concrete resurfacer last?
Thanks to its durability, concrete resurfacing can last a long time. Considering it’s been properly installed, well cared for and the existing concrete base is strong. A properly resurfaced floor can last from 10-20+ years.
Is quikrete concrete resurfacer self leveling?
QUIKRETE® Self-Leveling Floor Resurfacer (No. 1249-50) is a self-finishing interior floor topping and underlayment specially formulated to produce smooth surfaces ready for the installation of ceramic tile, resilient flooring or other finishes. No troweling required.
