If your furnace keeps shutting off, it could be due to low airflow. There are several indirect issues that cause low airflow. Dirty Air Filters. If you don’t change your air filters often enough, the filters will become dirty and clogged, which means the heat exchanger retains heat and eventually causes it to overheat.
How do you fix a furnace that keeps shutting off?
Quote from the video:
Quote from Youtube video: And now it's calling for Heat. And then it turns off so the problem is a dirty flame sensor nine. Times out of ten so I'll show you the steps on how to keep that clean once a season in this furnace we
Why does my furnace keep shutting off after a few seconds?
A common reason a furnace short cycles is because the heat exchanger, the part that heats your air, is getting too hot due to a lack of airflow. Once the heat exchanger overheats, it trips the high limit switch, which shuts the furnace down to protect it.
Why does my furnace turn off after a few minutes?
If your furnace turns off after a few minutes, there is a good chance it is caused by a faulty or dirty flame sensor. This vital component is designed to keep an eye on the gas burner. When it cannot sense that burner, the furnace runs then shuts off and starts again. This could be a relatively easy fix.
Why does my furnace keep shut off before reaching temperature?
A lack of airflow can cause your furnace to stop heating before reaching the set temperature. Ensure there is nothing impeding airflow around your furnace, within your furnace and through your ducts. Check that registers are open, no ducts are damaged or crushed and replace your furnace filter.
Why does my furnace shut off after 15 minutes?
If your air filter is too dirty, it will restrict airflow. Your furnace will then shut off prematurely to avoid overheating. We recommend replacing flat filters once a month, and pleated filters every three months. It’s easy to stay on top of changing your filter by adding a Filter Reminder on your thermostat.
How do I clean my furnace flame sensor?
Quote from the video:
Quote from Youtube video: So if you have a situation like this what you have 90% of the time is just a dirty flame sensor. So we'll go through the steps on how to clean it. So the right side of the furnace.
What does it mean when a furnace short cycles?
Furnace short cycling refers to the switching on and off of your furnace system without reaching the set temperature on the thermostat. And for those experiencing short cycling, you may notice suddenly that your home isn’t as warm as it should, leaving you and your loved ones cold and uncomfortable.
