What are the parts of a door jamb called?
The top horizontal section of a door or window frame is called the head jamb. A door jamb is an individual section of a door frame. Two side jambs make up the vertical components of the door frame and the head jamb is the top horizontal component. Together, the jambs (along with mullion) comprise the door frame.
What is the stuff that goes around a door?
An architrave is the piece of wood that goes around the door frame to cover the gap between the wall and the door frame. Often selected for decorative purposes.
What are the parts of a door frame?
Parts of a Door Frame
- Sill. It is the bottom part of the frame which is sealed or fastened to the floor. …
- Door Jambs. It is the vertical member of the frame which supports the door opening. …
- Head Jambs. It is the member that runs horizontally and is situated at the top of the frame,
- Horn. …
- Threshold. …
- Sidelight. …
- Transom.
What is a jamb kit?
The jamb kit is a timber lining kit that is attached to the pocket door framework that covers the edges of the door when it is closed so you cannot see the top of the door or into the pocket.It gives the pocket door installation a professional finish.
What is a rabbet in a door frame?
Rabbeted Jambs
A rabbet is a recess or groove cut into the edge of a piece of wood. That rabbeted edge, called the “stop” provides a seal and closure for interior doors, providing privacy.
What is door jamb molding?
Door jamb moldings are pieces of lumber utilized to hold and contain doors or windows in place to the outer frame of a door or window opening. After installation casing is installed around the perimeter of doors and windows on the interior of a building.
What is the difference between a dado and a rabbet?
Rabbet – a notch cut with or across the grain on the edge of a board with the two sides 90º to each other. Dado – a square or rectangular slot that runs across the grain.
What is a double rabbeted jamb?
Double Rabbeted jambs have two rabbets – one that is 1-3/8″ and one that is 1-3/4″ – so that almost any interior door will work with the jamb. While the jambs are noted as 4-9/16″ or 6-9/16″, their nominal sizes are 4-5/8″ or 6-5/8″.
What is door leaf?
Leaf – The most common type of door, a leaf is technically any door featuring a single panel that fills a doorway. Chances are that most of the doors in your home are single leaf.
What is door casing?
What is casing? Quite simply, it’s a moulding profile which frames (or trims) a door or window. Casing is functional as well as decorative. The main purpose of casing is to surround all doors and windows, covering any space or gap left between the drywall and frame.
Why is it called a door leaf?
A door leaf is, basically, what most people know as a door. To get technical with a door leaf definition, it is actually just one part of the door. It is the main panel that opens and closes. This doesn’t include the additional furniture and hardware, like hinges and handles.
What is a front door leaf?
definition of door leaf. The door leaf is the part of a door that constitutes the door panel only (before it is swung and before it is fitted with any door furniture). The door leaf is generally the part you would refer to as your door! definition of door frame.
What is a door riser?
Riser doors are access panels which are suitable for walls and they can provide up to 120 minutes fire protection, to cover any opening in a wall. Our riser doors are particularly easy to install, as they come fitted with the EziFit hinge system.
What is the strip at the bottom of a door called?
Door Sweeps are flat pieces of plastic aluminum or stainless steel fastened to a strip of nylon, plastic or vinyl, or a sponge brush to fill any gap between the door and the threshold. A door sweep is placed along the bottom of the door on the inside.
