How do you attach a shower curtain to a slanted ceiling?
If your tub or shower ends before the ceiling begins to slope, you can simply install a tension rod between the start of the slope and the opposite wall for the curtain. However, if the area below the slope is open to the shower you will have to attach the curtain to the angled part of the ceiling as well.
Should a shower curtain go all the way to the floor?
The average length of a shower curtain is 72 inches long and should be installed 75-77 inches from the floor, that way it isn’t touching the floor. However, many people deviate from this for reasons such as aesthetic, preferring the look of the curtain touching the floor.
Where should the bottom of a shower curtain fall?
Shower Curtain Rod Height
A standard shower curtain is typically 72 inches long, so the curtain rod should be installed around 75 to 77 inches from the floor. This height will keep the shower curtain from touching the floor.
Does shower curtain need to be above shower head?
The rule of thumb is to put the shower curtain rod three to five inches higher than the shower curtain’s length. At the least, you want the curtain to hang at least six inches past the rim of the tub.
How do you hang a shower curtain from the ceiling?
Quote from the video:
Quote from Youtube video: Into if not you may need to add blocking in the attic. Once the brackets are secure you can install the curtain rod the curtain hooks. And finally the curtain to complete.
How many inches off the floor should a shower curtain hang?
around 75 to 77 inches
The curtain rod should be installed around 75 to 77 inches from the floor, since a standard shower curtain is 72 inches long. The shower curtain can’t touch the floor.
Should you keep your shower curtain open or closed?
Should a Shower Curtain be Left Open or Closed? It is recommended that the shower curtain should be left closed so that it dries faster. After taking a shower, make sure to draw the curtain at the length of the tub so that it quickly dries. The plastic lining of the curtain should stay inside the tub as it dries.
How far from floor should curtain hang?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
Should a shower curtain hang inside or outside the bath?
Ideally, the curtain should be hanging inside the tub, keeping the water from getting out of your shower area. Hence, if you’re not using your bathroom, you can put it outside to hang. Indeed, shower curtains have a significant role in protecting the tiles outside your shower area.
Where do you hang a shower curtain rod?
For best fit, shower curtain should be 6″ – 12″ wider than shower rod. Mount rod approximately 3″ inside the point a straight rod is normally mounted. The midpoint of the rod should extend several inches past the outside rim of the tub. Depending upon tub model, mount rod between 6″ and 8″ from center line of the tub.
How do you install a shower curtain rod in drywall?
Quote from the video:
Quote from Youtube video: You want to put your drywall anchors to where they're flush with the drywall that way you get as much as the threads into the drywall as possible.
How do you install a shower curtain without a drill?
Quote from the video:
Quote from Youtube video: And place the caps on the correct ends adjust the shower curtain rod to the size you need and then extend it by about 2 centimeters longer than required.
Can you use a tension rod on drywall?
Always place a tension rod against the studs on drywall. Otherwise, the force from a tension rod can damage drywall. Do not pull or tug on the rod in an effort to separate the pieces.
How do you secure a rod to a wall?
- Use Curtain Rod Anchors or Longer Screws. Traditional curtain rod brackets install into the wall with fasteners (nails and screws). …
- Use a Thicker or More Durable Curtain Rod. …
- Install Center Support Brackets.
How do you secure a shower rod?
First, adjust your shower curtain to be a few inches longer than the shower. Hang the shower curtain rod at an angle, with one end several inches higher than you want it. Slowly slide that end down until the rod is hanging straight. The felt pads keep it from sliding further down the tile wall.
Will no more nails hold a curtain pole?
No More Nails is not bad but there is no glue in the world that will stick up curtain poles because the substrate will give even if the glue doesn’t.
Do you need wall anchors to hang curtains?
You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Having a hand tool ready often makes this job easier, since it can be hard to use a larger electric drill when mounting curtain rod hardware to the wall.
Should curtain rods go in studs?
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.
What screws to hang curtains?
Things You Will Need
- Tape measure.
- 1/4-inch bit.
- Plastic screw anchors.
- 1 1/4-inch screws.