A swage fitting is yet another type. It is similar to a crimp fitting in that an external tool is used to apply pressure and a sleeve maintains the pressure after the tools is removed. The major difference is the compressive tool applies much much more force to the sleeve than a crimp tool.
What is a swage fitting?
Swaging is a method of securing cable railing wire with a permanently fitted cable or sleeve. The connection typically exceeds the rated breaking strength of the wire rope or cable. This is accomplished using fittings known as swages. By definition, a swage fitting is a wire rope component.
What are the two types of compression fittings?
There are two types of compression fitting, standard (British type-A/non-manipulative) and flare fittings (British type-B/manipulative). Standard fittings require no modifications to the tubing.
What is the difference between swaging and crimping?
The basic difference between the two is that the swaging process reduces the ferrule size as it moves towards the fittings, while crimping changes the shape of the entire circumference of the hose.
What does it mean to swage a compression sleeve?
Quote from Youtube video: The aluminum is soft. And when compressed by the swaging tool will be forced into the valleys of the cable thereby locking the sleeve into place to begin forming your swage cable assembly.
What is purpose of swage?
A swage is the shaped tool used to transform an object’s shape into the desired form by bending or shaping. Swaging is used in the metalworking field, known as metallurgy, to serve a variety of purposes. As a noun, swaging can transform a piece of metal into a desired shape through pressure or hammering.
What is the opposite of swaging?
Expand
Swage(or reduction): Swaging reduces the tube’s outside diameter (OD), allowing one part to fit into another. Expand: Expanding increases the OD of a tube and is the opposite of swaging.
What are compression fittings called?
Quote from the video:
Quote from Youtube video: It can also be plastic it can be made from brass compression fittings are used in a variety of places pretty much anywhere you're connecting either water line or air gas pneumatic type lines.
What are compression fittings used for?
Compression fittings are a type of pipe fitting used in plumbing and mechanical systems. They have been around for decades and were first invented by Charles Parker. These fittings can be used to connect copper pipes with different shapes and materials, such as PVC or steel pipes.
Do compression fittings need Teflon tape?
On NEW compression fittings, PTFE tape is NOT REQUIRED although there are many people that still use it as an added layer of protection against leaks.
What is a swaged joint?
Brief Description of Swage Joint
Swaging is the process of joining two pieces of copper tubing of the same diameter by expanding or stretching the end of one piece to fit over the other so that joint may be soldered or brazed.
How much pressure can a compression fitting hold?
Maximum working pressure is 400 psi. Nominal working pressure is 200 psi. -65˚ to +250˚F. used with all part numbers to designate tube and pipe fractional sizes.
What is a swage plumbing?
The Swaging SPIN Tools for Plumbing are designed for the most common tubing diameters in Plumbing, and it’s recommended to L, K and M pipe types. The high-temperature method preserves the copper’s malleability while performing the swage, preventing cracks and leaks.
Does swaging weaken copper?
It’s fast, easy, and has a very high success rate that won’t damage the copper. Each head fits a different pipe size, and you simply pump the handle until the copper is fully expanded. Then, a simple release of the pressure allows you to remove the tool and get a good swage every time.
How do you swage copper pipe?
Quote from the video:
Quote from Youtube video: Open up and that's just going to expand your copper tubing. Also you want to notice that you're gonna have these little seams here. So I always turn the copper a little bit as I am swaging.
Is it Swedging or swaging?
Swaging (/ˈsweɪdʒɪŋ/) is a forging process in which the dimensions of an item are altered using dies into which the item is forced. Swaging is usually a cold working process, but also may be hot worked.
What is the difference between swaging and flaring?
Tools for flaring apply pressure to expand the end of pipes or tubing to create a funnel or flared shape. Swaging tools allow you to create wider, deeper openings for pipes and tubing. The use of these tools varies depending on the application of the pipes and tubing.
What does swage mean in English?
swage in American English
1. a kind of tool for bending or shaping metal. 2. a die or stamp for shaping or marking metal by hammering. verb transitiveWord forms: swaged or ˈswaging.
How is swaging done?
Swaging is a process that is used to reduce or increase the diameter of tubes and/or rods. This is done by placing the tube or rod inside a die that applies compressive force by hammering radially.
What are the advantages of swaging?
The process is easy and does not require any skilled operator. Low manufacturing cost. High surface finish. No material wastage because it does not form any chips.
What is swaging in metal?
Swaging is a method used to move the shape of metal through cold forming. This process ‘moves’ not removes metal, so essentially it’s a scrap-less forming process. Swaging is a manufacturing process that uses a tool called a swager, for cold shaping metal into the required shape.
