What kind of four wire connector is this?

What are the 4 types of connectors?

The six levels of interconnection typically seen in electrical connectors.

Board-to-Board Connectors.
Wire/Cable-to-Wire/Cable Connectors.
Wire/Cable-to-Board Connectors.

What are some different kinds of wire connectors?

Types

Audio and Video Connectors. …
Automotive Electrical Connectors. …
Board Mount Connectors. …
Board to Board Connectors. …
Centronics Connectors. …
Circular Connectors. …
Coaxial Connectors. …
DIN Connectors.

What are the 4 wires in electrical wire?

A 4-wire circuit will have a red wire, black wire, white wire and a ground wire. The ground wire can be green or bare (without insulation).

How do I identify a Molex connector?

The Molex connector is one where the male/female terminology is a bit odd. The female connector is usually found on the end of a cable, and it slips inside of a plastic shell which surrounds the male pins on the male connector.

What are the different connectors?

Electrical Power Connector Types. …
AC Connectors. …
DC Connectors. …
Wire Connectors. …
Blade Connectors. …
Plug and Socket Connectors. …
Insulation-Piercing Connectors. …
Other Electrical Articles.

How do you connect 4 wires together?

Quote from the video:
Quote from Youtube video: You may use Scotch lock reducing. But terminals a 3-way connector. You may even get creative.

What are the 3 types of wiring connections?

Types of Electrical Wiring

An explanation of the differences among the three types of wiring: parallel, switch, and series. Parallel and Switch Wiring Diagrams. …
Parallel Wiring. The wiring for most homes is parallel, meaning several devices are powered on a single circuit. …
Switch Wiring. …
Series Wiring.

What are the 5 types of connectors?

Various types of connectors are used to perform one particular function that is to connect or disconnect the circular path of the electric current.

Classification of Connectors Based on Connector Function:

Terminal Block.
Binding Post.
Plug and socket.
Rack and Panel.
Blade.
Ring and Spade.

What is a spade connector?

Spade terminals are designed to mate, connect, or terminate a single wire to a screw or stud-type electrical connection. The shape of the spade connector resembles a fork, making it easy to connect or disconnect the spade terminal to the electrical connection.

What is 4-pin Molex connector?

The Molex 4-pin power supply connector is one of the standard peripheral power connectors in computers today. The power connector itself is a Molex 8981 connector called the AMP MATE-N-LOK.

How do I know if I have a JST connector?

JST connectors are mostly identified by the length between one contanct to the centre of another contact. There are always between two to higher contacts in a single line. Some families have multiple rows as well. This length is the pitch of the connector type and determines the family that the connector is a part off.

Are all Molex connectors the same?

There are three typical pin sizes: 1.57 mm (0.062 in), 2.13 mm (0.084 in), and 2.36 mm (0.093 in). The 1.57 mm pin can carry 5 A of current, while the 2.36 mm can carry 8.5 A. Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power.

What connector has 4 pins?

a 4-pin connector used for older IDE (PATA or Parallel ATA) drives and some newer SATA drives, providing +5 v or +12 v to the drive.

Is a Molex 4-pin?

Often refers to the 4-pin connectors used to attach DC power to the drives inside a PC cabinet. Molex is a large manufacturer of electronics plugs and sockets that dates back to the 1940s.

What is a 4-pin Berg connector?

The 4-pin Berg connector is commonly known as the floppy power connector, as it was used for connecting the 3.5-inch floppy disk drive to the power supply unit. It is the most popular Berg connector.

What is a SATA connector?

SATA Hard Drive Connectors

Serial ATA (SATA) is the SATA-IO standard interface for storage devices connecting with consumer devices. SATA replaces the parallel ATA bus to meet the increased bandwidth and performance demands of hard disk drive (HDD) storage applications.

What is a Berg cable?

Sometimes labeled on the cable as P7, the Berg connector is a power connection developed by Berg Electronics. It is used with computer power supplies that connect to floppy disk drives, front panel lights, and reset or turbo buttons.

What is the 4 pin ATX power connector for on a motherboard?

As the motherboard specification says, it’s a 4-pin ATX 12V power connection. Pretty much every modern motherboard has a separate 12V power connector that’s either a 4-pin or an 8-pin. The primary purpose of this power connector is to power the VRM that supplies power to the CPU.

How does a 4 pin connector work?

Quote from the video:
Quote from Youtube video: It supplies the motherboard with additional power the p4 connector is generally near the CPU. Like the p1 connector it can only be plugged in one way.