How do you attach threshold to concrete?
Quote from the video:
Quote from Youtube video: The hole should be drilled 1/2 inch deeper in the base materials in the anchor will penetrate. The deeper the embedment of the anchor in the base material.
Can you glue a threshold to concrete?
If the subfloor is concrete, you may need to glue the threshold down. To do this apply a strong adhesive to the edge of the wood flooring, and then place the threshold over the gap between the two sections of floor and push down on the piece to glue down.
How do you fix the threshold on a concrete floor?
Quote from the video:
Quote from Youtube video: You pull the old threshold out you don't have your mounting holes. No mounting holes in this one.
How do you secure a transition strip to concrete?
Quote from the video:
Quote from Youtube video: Go into the void. Part of the toothpick. And hold the transition strip down really tight. It's going to give you a nice tight transition strip here. And. It looks like I got one left to do here.
How do you attach something to concrete without drilling?
Cut Nail. Using cut nails is an easy approach for attaching wooden items to concrete without a hammer drill. The cut nail has a square, tapered shape with a tip pa. These are driven through a board into the concrete underneath, much like nailing wood to the wood floor.
How do you install marble threshold on concrete?
Quote from the video:
Quote from Youtube video: Here blow it a little bit get all this dust out the way you bring in the threshold that you just cut and you're going to place it down make sure that it goes in like that.
What to use to glue down a threshold?
I’d say a bit of Liquid Nails (use whatever type is spec’ed for wood) and some brads would be your best bet. I would use Gorilla Glue, as polyurethane glues are waterproof in a way that polyvinyl acetate glues aren’t.
How do you transition from wood to concrete?
Quote from the video:
Quote from Youtube video: And these wood pegs that they sell with usually the wood transitions in the same areas and these were going to end up happening are these little pegs here. These are what the screws.
Can you glue down transition strips to concrete?
When using transition strips that are installed on tracks, glue the track instead of the strip. If the manufacturer requires the flooring to be sealed, run a bead of 100-percent silicone along the flooring edge before installing the transition.
Can you use tack strips on concrete?
Quote from the video:
Quote from Youtube video: They're gonna work for if your concrete is too hard. And it's just busting up.
How do you install transition molding on concrete?
Quote from the video:
Quote from Youtube video: This is the track. Okay bottom of the mold. And these holes will line up with that the screws will go through. Into my wig pegs. So that is the solution for putting in along the flowing over concrete.
Does Liquid Nails work on concrete?
Will Liquid Nails work on concrete? The answer is yes. Liquid Nails construction adhesive will fasten wood to concrete as long as the conditions are right and you use the right type of Liquid Nails.
How do you attach something to concrete?
Quote from the video:
Quote from Youtube video: Now when that's in concrete that becomes rock solid. Now onto the actual kit you're gonna get the anchors of course and the special drill bit now you want to use the one they give you with the kit.
Can you screw directly into concrete?
Concrete screws are a quick and convenient way to fasten to concrete. The best thing about these screws is that you can screw directly into concrete without any need for hammering or an anchor or shield to install. All you have to do is drill a hole and drive in the screw.
What are the best anchors for concrete?
For that reason, the best concrete screws are either stainless steel, galvanized, or zinc coated. Many are simply coated with a corrosion-resistant layer, which is usually blue. These materials do better in damp conditions and resist the moisture present in concrete surfaces.
How do you attach a bottom plate to a concrete floor?
Quote from the video:
Quote from Youtube video: So what I did was I use these things called sleeve anchors a brand called red head and the way these work is you drill a hole through the stud and the concrete.
Can I use plastic anchors in concrete?
Wall anchors can be used in drywall, concrete, brick, metal or wood, and installation takes just a few steps. Plastic wall anchors are useful for hanging lightweight pictures and small decorative objects. Keep the weight of the object under 30 lbs. or the anchor may pull out of the wall.
How do you install a plastic anchor in concrete?
Quote from the video:
Quote from Youtube video: So the next step is to actually take the anchor. And place it in the hole. That you just drilled. And then take a hammer and use that hammer to force the anchor into the hole.
How much weight can a concrete anchor hold?
Anchor Types Overview
Masonry and concrete anchor types are considered light-duty, medium-duty or heavy-duty, based on how much weight they can support. Light-duty anchors are good for wall hangings that weigh up to 50 pounds. Medium-duty anchors are good for wall hangings that weigh up to 200 pounds.
