Acrylic SealerSealing Exposed Aggregate Apply a Solvent Based Acrylic Sealer. These sealer types can be used on exposed aggregate with excellent results. Using a 1/2″ roller, start applying the sealer at the far end making sure to not step in the sealer. The sealer should be applied at the manufacturer’s spread rate.

How do you seal exposed aggregate patio?

Quote from the video:
Quote from Youtube video: You don't need to rub sealer in the concrete. Just lay it on top dip. With each roll. Then even it out by back rolling from another direction. This will smooth out lap lines.

How do you seal an aggregate concrete patio?

Quote from the video:
Quote from Youtube video: You can see it has a little rocks that kind of come up to the surface of the concrete. So it's not like a polished concrete or a traditional in a flat concrete it actually has the rocks exposed hence

Should I seal exposed aggregate?

Does exposed aggregate need to be sealed? Yes. These sealers—typically film-forming acrylic resins—can help protect against spalling, dusting, efflorescence, freeze-thaw damage, stains, deicing salts, and abrasion. A sealer will also enhance the color of the aggregate, accentuating its depth and richness.

Can you coat exposed aggregate concrete?

Topical sealers are the most common choice for exposed aggregate. It adds to the already highly decorative nature of the concrete while also protecting it and increasing its overall life span. Topical sealers also have the added advantage of holding down and sealing and loose stones from the aggregate.

What do you spray on exposed aggregate?

A water hose with good pressure is the preferred method for washing exposed aggregate. After it’s washed and everything looks consistent, spray on a sealer or curing compound. This is particularly important for exposed aggregate finishes because the washing process can weaken the surface.

How do you refinish exposed aggregate?

Quote from the video:
Quote from Youtube video: And then we're going to use Trin –ax stamped shield Tremec stamped shield is a low build sealer. So we won't have problems with voiding out it's going to color enhance.

How do you fix patchy exposed aggregate concrete?

This uneven exposed aggregate surface needs to be treated with an acid wash.

Here are the steps:

  1. Patch and fill cracks and seams.
  2. Apply primer.
  3. Put down cement-based mortar bed and/or waterproof membrane and/or crack suppression membrane.
  4. Apply primer.
  5. Apply scratch coat.
  6. Apply primer.
  7. Finish with the overlay system.

How do you repair cracked exposed aggregate concrete?

Quote from the video:
Quote from Youtube video: Directly into the crack. Add some rock to the wider parts of the crack. Use a popsicle stick or a trowel move around the rocks together just right. Continue on down the crack. And more rock when you.

How do you seal a pebble patio?

Quote from the video:
Quote from Youtube video: And for best results apply a light second coat within 15 minutes before the surface is completely dry. If any sealer remains on the surface after 45 minutes remove with a dry sponge or cloth. These.

How long does Exposed aggregate last?

Penetrating sealers preserve the concrete without changing the look, allowing the exposed aggregate to retain its natural appearance and color. They seal the aggregate without leaving behind a visible surface film. On average they last from seven to 10 years and require little to no maintenance.

How do you wash aggregate concrete?

Quote from the video:
Quote from Youtube video: Areas you're gonna have to pour your initial pour about a half inch low depending on the size of aggregate you're using because that's gonna bring up the elevation.

How do you acid wash exposed aggregate concrete?

Hose down the entire area you want to wash, then use a plastic watering can to sprinkle your diluted acid onto the concrete. Brush the acid over the concrete with a push broom or a long masonry brush. Let the acid sit for 5-10 minutes, then rinse the area and scrub it with your push broom and neutralize the acid.

Should you acid wash exposed aggregate?

A minimum of 7 days curing is recommended for increased concrete strength and improved bonding of the aggregates into the surface. An acid-wash treatment (1 hydrochloric acid to between 10 and 20 parts water) is usually necessary to brighten up the stones by removing the fine cement film from the surface.

Do you need to acid wash exposed aggregate concrete?

The acid washing of concrete is a requirement after the concrete has cured sufficiently, in order to remove surface efflorescence and to open the pores before sealing. This will help the sealer to penetrate and result in a superior bond between the sealer and the surface.

How long should muriatic acid sit on concrete?

eight to 10 minutes

Brush or spray the acid solution on the concrete, wait eight to 10 minutes, then neutralize the acid by spraying the surface with a mixture of one cup of ammonia in one gallon of water. Kill Mold—Use muriatic acid to kill stubborn mold and mildew on hard surfaces, such as brick, tile, concrete, and stone.

Does muriatic acid ruin concrete?

Mix your muriatic acid.

High concentrations of muriatic acid can etch concrete, glass, remove paint, dull chrome, and cause other issues. Below is a summary of how much to add to a gallon of water: Heavy cleaning: 3 ounces of muriatic acid to one gallon of water.

Will muriatic acid eat through concrete?

The acid works well on concrete and on many masonry projects because it neutralizes alkalinity. The surface becomes “etched” and clean, which allows for the proper adhesion of a new coating. Despite its effectiveness, muriatic acid should be used on concrete stains only if you’ve tried gentler alternatives to no avail.