sump pumpordinary sump pump .

What kind of pump do I need to empty my pool?

Submersible Pumps



If you’ve ever needed to drain your pool, it’s likely you’ve already encountered a submersible pump. A submersible pump, as the name implies, operates while fully submerged in water. These pumps feature a lot of horsepower, and primarily drain the water safely from swimming pools and spas.

Can you use pool pump to drain pool?





There are a few things to keep in mind in order to drain your pool safely. Never use your pool pump to try to drain the pool. Inevitably, you will pull air into your suction line, the pump will lose its prime, and you will damage or burn up your pump. Always rent or purchase a submersible pump to drain the pool.

How do you pump out a dirty pool?

Here is how to go about it;

  1. Clean the Pool Surrounds. …
  2. Use a Skimmer Net to Clean the Water Surface. …
  3. Vacuum Large Debris from the Pool Floor. …
  4. Drain the Pool. …
  5. Refill & Clean. …
  6. Balance the Water. …
  7. Skim, Vacuum & Filter the Water.


Can I use filter pump to drain pool?

Using the Pool Filter Pump to drain the pool



Place the filter multiport valve in the Recirculate position and turn on the pump, after you roll-out the backwash hose; monitor pool draining closely. Eventually the pool drain will begin to suck air, with about 6-9″ of water left in the deep end, if you’re lucky.

Can you use a submersible pump to drain a pool?





With their simple but effective design, you can use submersible pumps for a variety of tasks, from draining a pool to emptying out a flooded basement. Before you begin pumping, you’ll need to find a drainage point and turn off the electricity to the area you’ll be draining.

How can I empty my pool without flooding my yard?

All you need is a medium-size water or vacuum pump.

  1. Unroll the pump’s intake hose so that it reaches the center of the pool (or as close to it as possible), and submerge it in the pool.
  2. Place the outlet hose so the exiting water doesn’t flood the area, but drains off away from the pool.
  3. Dry your hands thoroughly.

How do you drain a pool without backwashing?

You simply connect a drain hose to the pump, and then drop the pump into the pool and let it sink to the bottom. Plug it in, and it will pump water through the drain hose to a drainage area. Use this option when you don’t have a drainage spigot or multiport valve.

How do you drain a pool with a vacuum hose?

Just siphon with the vacuum hose. Attach it to the vacuum head for weight, feed it down slowly to let it fill, cap it with your hand, and quickly haul it out and over and below the water level inside.

Can I use backwash to drain my pool?



It is not recommended to drain a swimming pool through the backwash valve. While sucking from the main drain and putting the water down the backwash line will work in some scenarios it puts your pool pump at risk of losing prime and running dry.

How do you drain a pool with a sand filter pump?


Quote from Youtube video: Now when we're adjusting the valve for a sand filter the pump has to be turned off so make sure your pumps turned off once. It's turned off you can move the dial at the top here to waste.

How do I drain my pool with a cartridge filter?

How to Drain A Pool with a Cartridge Filter

  1. Shut off the pump.
  2. Go to the back of the filter and unscrew the drain plug.
  3. Turn the pump back on and let the water run until it reaches the point where you want to drain the water out.
  4. Turn the pump back off and put the plug back into the drain plug.



Can you have a mineral pool with a cartridge filter?

Note that a cartridge filter can be used, but it will need to be a largely oversized model to help prevent excessive cleaning due to the exceptional flocculent properties of MagnaPool minerals. However the preferred method is to use a media filter filled with glass.

How do you drain a pool with a Jandy pump?

Quote from the video:
Quote from Youtube video: They always have a position that'll say drain or waste. Or if it doesn't have that you can just use the position backwash. So you're going to want to take the valve.

How do you drain a pool with a Pentair pump?

Quote from the video:
Quote from Youtube video: You need to find the hose bib on your equipment hose bib also some people call it a water spigot open it up with the pump on.

How do you drain a Pentair filter?



Quote from the video:
Quote from Youtube video: So it's really easy just turn everything off once all the pumps are off you'll come over to your valve that is right after the pump and before the filter.

How do you drain a Jandy pool filter?

Quote from the video:
Quote from Youtube video: So first is first make sure you turn your pump off so the last thing you want is your pump running because this thing will gush water. So i can go into my handheld.

What does a Jandy energy filter do?

The Energy Filter removes debris such as dirt, dust, pollen or other debris to prevent your pressure side pool cleaner or other water features from clogging up and or becoming damaged.

How do you backwash a Jandy pump?

Just follow the below steps to get backwashing:

  1. First, turn off the filter system. …
  2. Then, connect the backwash hose to the filter’s backwash port. …
  3. Open the backwash gate. …
  4. Turn the filter system back on, and let it go for about three minutes. …
  5. Turn the filter system back off.
  6. Go ahead and close that push/pull valve.