If your ceiling fan stopped working but the light still works, check for a humming sound. This could be indicative of a blown motor capacitor, which is often caused by overheating. While inspecting the motor housing, look for a small black box connected to the pull cord.
Why does my fan only work when the light is on?
A Broken Pull Cord Inside the Fan
Another reason your ceiling fan may work only when lights are on is a broken pull cord. Pull cords help turn the fan and lights on and off when using a single switch. When the pull cord for the fan is broken, if it’s on or in high settings, it will stick in that position.
Why does my ceiling fan shut off?
Most ceiling fan lights tend to go OFF upon overheating. The lights overheat if the fan is abused or overused. Most ceiling fan lights do have cooling bearings, but they tend to come off with age. A slightly loose wire in the circuit is enough to turn OFF the light.
Why do ceiling fans stop spinning?
REASON: One of the common reasons because of which you have a ceiling fan that won’t spin is a blown motor capacitor. The motor capacitor may simply burn out due to either overheating or age. If you have been using the fan for a long time, then the chances of this may increase.
How do I know if my ceiling fan motor is bad?
Quote from the video:
Quote from Youtube video: When the ceiling fan isn't working. And you have that loud humming sound a lot of times you'll just smell almost an electrical burning smell. That your motor out.
How do you fix a ceiling fan that stops working?
Ceiling Fan Is Not Working
- Check the circuit breaker to confirm the power is on. …
- Turn the power off the circuit breaker. …
- Make sure the fan blades spin freely. …
- Confirm the reverse switch is not in a neutral position. …
- Verify the plug connection in switch housing is securely fastened and all color-coded cables are aligned.
Where is the capacitor on a Hunter ceiling fan?
Quote from the video:
Quote from Youtube video: However most starting capacitors will be found on top of the motor assembly disassemble the fan to access the capacitor. To reach the capacitor in the motor unscrew.
What is the average life of a ceiling fan?
Exhaust and ceiling fans are estimated to typically last for a maximum of 10 years while air conditioners last for 8 to 15 years.
What happens when a ceiling fan capacitor goes bad?
If the capacitor is bad, the fan is still getting power, but because the start coil is compromised, it can’t develop enough torque to start the fan. You can start the fan yourself, however, by giving it a push, and it will keep running. Before you do that, listen to the fan carefully, and you’ll hear a humming sound.
Does a ceiling fan have a reset button?
There are several ways to reset a ceiling fan remote, but here’s the most straightforward: With the power off, hold down the button until the light on the remote flashes. Then, press and hold it again for 15-30 seconds to resynchronize the remote with your fan.
Do ceiling fans have fuses?
Ceiling fans don’t have fuses. The only fuses involved in the operation of a ceiling fan are in the electrical circuit breaker that controls the fan.
How do I test my ceiling fan receiver?
Quote from the video:
Quote from Youtube video: A ceiling fan remote contains a transmitter that when working properly sends a signal to a receiver in the ceiling fan to test the remote. Try using it within 10 to 20 feet of the fan.
Where is the DIP switch on a ceiling fan?
The DIP switches for the receiver are located on the flat surface of the receiver. The DIP switches for the transmitter are in the battery compartment. 4-4. Raise the fan and align the slots in the canopy with the hooks on the ceiling plate.
How do you reset a DIP switch?
Factory Reset using DIP Switches
- Raise Switch-1.
- Power the unit Off and On.
- Lower and Raise Switch-1 three times.
How do I reset the DIP switch on my ceiling fan remote?
Quote from the video:
Quote from Youtube video: Gently grab the jumper and pull up want to move it over. Here you can do that by setting it back down.
What is a fan DIP switch?
Ceiling fans have a dip (for “dual in-line package”) switch for setting the frequency. Follow these steps to set or reset the frequency of the ceiling fan. Turn off the circuit breaker that provides power to the ceiling fan.
Where is the receiver in Hampton Bay ceiling fan?
Hampton Bay Ceiling Fan Receiver Location: If your transmitter has a reverse button, then the receiver will often usually be in the Switch Housing (located between the blades and the light kit). Sometimes you will find it around the top of the motor, on the side of the motor, or in the canopy, at the ceiling.
Is there an app to control my ceiling fan?
Aubric smart ceiling fan remote control kit enables you to control your ceiling fan and light via RF remote control, smartphone app, and even voice control with Amazon Alexa or Google Assistant. It’s time to enjoy smart life with home automation.
