Is there an alternative to fluorescent tubes?

LED T8 tubes are an easy replacement to traditional fluorescent tubes. makes them the best alternative to fluorescent tube lights. LED tubes are energy efficient, environmentally friendly alternatives to standard fluorescent tubes, in that they have no mercury content, run cool and emit no UV light.

What are the ends of a fluorescent light fixture called?





Electrodes. Straight fluorescent lights have two sets of electrodes (one at each end of a tube) that connect to the fixture via two small metal prongs, which are visible outside the tube. The electrodes are hidden in CFLs because they are in the screw-type base.

What is a single ended LED tube?

A single-ended LED tube is a tube that has the live and neutral pins on the same side of the tube. This end will be the “Input” end.

What can I replace fluorescent lights with?

Replacement choices include pendant lighting, flush-mount ceiling fixtures, track lighting, monorail lighting, potrack lighting and more. You can even skip the ceiling-mounted light and instead install a couple of wall sconces.

What is a plug and play LED tube?

What are Plug and Play LED Tubes? Plug and play LED tubes are shaped just like fluorescent bulbs and connect to the fixture the same way. Since plug and play LEDs are compatible with ballasts, you can simply remove a fluorescent bulb and replace it with an LED.

Can you use LED tubes in fluorescent fixtures?





You have fluorescent tube lights in your home or business already, and you’re wondering if you can pop LED tubes in these fixtures or if you’ll need to change out the fixtures for something designed for LED. Good news! You can use LED tubes in your existing fixtures!

What part of the fluorescent tube connects the lamp to the electrical connection?

In a fluorescent lighting system, the ballast regulates the current to the lamps and provides sufficient voltage to start the lamps. Without a ballast to limit its current, a fluorescent lamp connected directly to a high voltage power source would rapidly and uncontrollably increase its current draw.

How many terminals does fluorescent tube have?

They have two terminals per side to allow current circulating in the electrodes to heat them.

Which is brighter T12 or T8?

The standard T8 produces 2,800 initial lumens per lamp, 6% brighter. But the standard T12 lamp produces 2,300 design lumens and the T8 produces 2,660 design lumens.

Can I replace a T12 fluorescent light tube with an LED tube?



T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine. But here’s some even better news: If you have a T12 fixture, conversion to LED is going to be even easier than with a T8 fixture. This is because T12 fixtures have non-shunted tombstones, exactly what you need for LED tubes.

What is a magnetic ballast?

A magnetic ballast is a piece of lighting equipment often used in small and large growrooms. There are three basic types of ballasts: magnetic, electronic, and digital. Like all ballasts, a magnetic ballast regulates the voltage a fluorescent light receives so that the bulb doesn’t overheat and immediately explode.

How do you wire a single pin LED tube light?

Quote from the video:
Quote from Youtube video: 운반 케이스.

Can plug and play LED tube work without ballast?



A plug-and-play, or direct fit, linear LED is probably what you’re imagining – a simple, one-for-one swap out of the original linear fluorescent lamp. This lamp works directly with the existing fluorescent ballast, so there is no rewiring or ballast change required.

How do you wire a fluorescent light without a ballast?

Quote from the video:
Quote from Youtube video: First disconnect the hot neutral. And ground wires that are connected to the ballast. Then cut all the wires leading from the ballast to the lamp sockets.

What is a shunted tombstone?

Shunted tombstones (a socket or lampholder named after their shape) allow power between contacts and receive voltage with L/N on different sides. On the other hand, no power flows between contacts in non-shunted tombstones. They allow separate points of entry for the wires with L/N on the same side.

How do you rewire a fluorescent light to a LED?

Quote from the video:
Quote from Youtube video: This particular fixture we're gonna take and put a black wire to this bank of tombstones. We're gonna put the white wire to that bank of tombstones. And when we put this bulb. In bingo.

What voltage are fluorescent tubes?



“Fluorescent tubes and electroluminescent panels typically require 200 to 600 V for starting and running illumination.” A fluorescent light is a type of gas discharge tube, which contains an inert gas (such as argon, neon, or krypton) and mercury vapor.

What is the difference between magnetic and electronic ballast?

Magnetic ballasts work at a frequency of around 60 Hz, whereas electronic ballasts work at an increased frequency of around 20,000 Hz. This is why fluorescent lamps using electronic ballasts do not flicker or emit any buzzing sounds. Electronic ballasts are also quite smaller in size and weight.

Can fluorescent lights run on DC?

Fluorescent lamps can run directly from a direct current (DC) supply of sufficient voltage to strike an arc. The ballast must be resistive, and would consume about as much power as the lamp.

Are fluorescent tubes AC or DC?

Fluorescent tubes are almost always powered with AC, but this circuit uses DC. Basically, this circuit is a voltage doubler composed by two 1N4007 diodes and two high voltage electrolytic capacitors of 10 μF 350 V. Such capacitors can be easily salvaged from compact fluorescent lamps.