It appears that currently you’d measure the height from “the highest part of the adjoining land.”, which would mean that you’d measure from the up side of the slope. Source. So your building; as planned, is in compliance.

Where do I measure the height of an outbuilding from?

The height is to be taken from the land immediately adjacent to the outbuilding to the highest part of the building. To assist you should you have somebody query the height , you would need to backfill the land up to the side of the building.

How do you measure eaves height of sloping ground?





The height of the eaves will be measured from the natural ground level at the base of the external wall of the extension to the point where the external wall would meet the upper surface of the roof slope.

Where is permitted development height measured from?

ground level

2.10 As defined in article 1(3) of the Town and Country Planning (General Permitted Development) Order 1995, height is measured from ground level – “Ground level means the level of the surface of the ground immediately adjacent to the building in question, or where the ground is not uniform, the level of the highest …

Where is the height of a building measured from UK?

For the purpose of measuring height, the eaves of a house are the point where the lowest point of a roof slope, or a flat roof, meets the outside wall.

Where is ground level on a sloping site UK?





Ground level is the surface of the ground immediately adjacent to the building in question. But where ground level is not uniform (eg if the ground is sloping), then the ground level is the highest part of the surface of the ground at the front of the building. Ground level must be virgin ground, ie.

How high can a shed be next to a fence UK?

2.5 metres tall

According to UK shed regulations, you do not need to seek planning permission if your shed is 2.5 metres tall (or less) and sits at least two metres from the boundary of a property – whether a fence or wall [1].

Where is ground level on a sloping site?

“Ground level is the surface of the ground immediately adjacent to the building in question. Where ground level is not uniform (eg if the ground is sloping), then the ground level is the highest part of the surface of the ground next to the building“.

How do you measure the planning height of a building?



How is building height measured? Building height is measured from finished grade located within 2 feet of the foundation wall to the highest point on the building or structure.

What is the eaves height of a shed?

This is the height of the side wall of your building or sometimes called wall plate level. Eaves height can be anywhere from 1.80 m – 3.60m on our buildings depending on customers’ requirements.

Which unit is appropriate for measuring the height of a building?

Choosing Appropriate Units of Measure

Quantity Appropriate unit of measure
Height of a person Feet and inches, or centimeters
Weight of a person Pounds or kilograms
Height of a high-rise building Meters or feet
Height of a mountain peak Meters or feet

How do you measure ground level?



Nominating the “ground level (existing)” is usually achieved by taking the lowest level directly and vertically beneath the highest part of the proposed development on a site (based on surveyed RLs), to determine a maximum building height dimension.

Do you need planning permission raising ground level?

1] Raising the level of ground is subject to planning permission. 2] There are permitted development rights which enable a maximum patio or deck level of 300mm above the “natural ground level” . Higher than that requires a planning application.

How high can I raise my garden without planning permission?

Erecting a new fence, wall or gate will not require need planning permission if: it would be below 1 metre high and next to a road used by vehicles (or the footpath of such a road) or below 2 metres high elsewhere.

How do I raise the ground level in my garden?

IN THIS GUIDE

  1. Make sure you have permission.
  2. Measure the rise and run of the slope.
  3. Water the ground you’ll be digging.
  4. Build the retaining wall.
  5. Pile up soil behind the retaining wall.
  6. Ensure the new lawn is level.
  7. Compact the soil.
  8. Plant a new lawn.

Where do you measure fence height from?



When measuring the height of the fence, normally this would be measured from the natural ground level of the fence owner’s property. However, where the ground levels on either side of the fence are significantly different, the height should be measured from the lower ground level.

How do you level a fence on uneven ground?

If your land doesn’t slope but suffers from uneven areas where it dips, you can build a level-topped fence with a little landscaping. Start by filling in the low spots with a bit of soil and grass seed. For larger dips, you may need to fill in with rocks and gravel with dirt on top.

How high can my fence be UK?

2 metres

Are there any legal rules and regulations I need to consider? In the UK, the norm is that fencing in your back garden should be a maximum height of 2 metres (about 6.5 feet) and the front garden of your property should be 1 metre (3.2 feet).

How high can Neighbours fence be?



The laws actually state that a fence can be as high as 100 meters. However, this is only allowed if proper planning permits have been obtained. This means that any fence under 2 meters in height does not require a permit. This simple law has a few complications to it.

Can I build an 8 foot fence?

If the previous owner of your property, or even you (before your needs changed) installed a fence that is now too short, there may be a solution. Adding a fence extension can create up to 8 feet of height for your fence.

Can I put trellis on top of a 6ft fence?

Can you add trellis to your fence to give yourself extra privacy? That depends. There is no legal difference between trellis and fencing. So – in theory – the height of your trellis must be no more than 2 metres.