Installation on the ceiling is recommended. If you’re installing on the wall, make sure Protect is within 12 inches (30.5 cm) of the ceiling.

Where do I put Nest Protect?

Installation on the ceiling is recommended. Make sure Protect is at least 30 cm (12 inches) away from the wall. If you’re installing Protect on the wall, place it between 15 to 60 cm below the ceiling.

Do you need Nest smoke detector in every room?

On every floor, including finished attics and basements



Most state residential building codes require a smoke alarm on every level for your own protection. In homes with more than 1,000 sq. feet on one level, additional alarms may be required.

Where in a bedroom should you install a smoke detector?

Quote from the video:
Quote from Youtube video: You can mount the smoke alarm in this area. The preferred place to mount a smoke alarm is. The center of the room.

Where should I place my optical smoke alarm?

Optical smoke detectors are suitable for installing in bedrooms and living rooms where soft furnishings and cables are common place. They can also be installed in downstairs hallways as they are significantly less likely than ionisation alarms to sound falsely when cooking fumes are present from the kitchen.

Are Nest fire alarms worth it?

Smart smoke alarms are the cure, and Google Nest Protect is the only one worth buying. It sends speedy alerts of smoke or carbon monoxide to your phone, has great design, is simple to mute, and has a “heads-up” warning before triggering its siren. The Protect also self-tests and has a motion-activated path light.

Can you put Nest Protect in kitchen?

Some rooms in your home have conditions that are more likely to damage a smoke and carbon monoxide alarm or set off nuisance alarms. However, Nest Protect can be installed at least 3 m (10 feet), from cooktops or cooking appliances.

How close should a smoke detector be to a bedroom door?

The locations for ceiling-mounted smoke detectors installed on a smooth ceiling for a single or double doorway must match the centerline of the doorway no more than five feet from the door and no closer than 12 inches to the doorway.

How many Nest smoke alarms do you need?

Current NFPA recommendations actually encourage “placement of at least one smoke alarm on every level of the home (including basements) and in every bedroom, and outside each sleeping area,” according to alarm maker Kidde.

Does carbon monoxide fall or rise?

Because carbon monoxide is slightly lighter than air and also because it may be found with warm, rising air, detectors should be placed on a wall about 5 feet above the floor. The detector may be placed on the ceiling. Do not place the detector right next to or over a fireplace or flame-producing appliance.

Does Nest smoke detector listen?

The Nest Protect smoke detector has a microphone in it. The purpose for this is to listen at the audio announcements and to determine that the buzzer and speaker are working.

Does Nest detect cigarette smoke?

I had to repeat this several times to get the Nest Protect to alarm. First it notifies with a yellow ring that smoke is detected. I had to repeat my candle process a couple more times to get it into full alert mode.

How long do Google Nest smoke detectors last?

To comply with certification standards, 2nd gen Nest Protect has to be replaced after 10 years, while 1st gen Nest Protect has to be replaced after 7 years. Because CO sensors have a limited life expectancy, certification standards require Protect to chirp after its sensors have expired or have failed.

Does Nest Protect need to be hardwired?

Ideally, you’ll hard-wire a Protect and provide battery backup for the times when the power goes out. That can be expensive, though, and isn’t for everyone, so the Nest also offers a fully battery-powered version.

How long do the batteries last in the Nest Protect?

five years

The battery-powered model comes with six AA batteries that Nest says will last five years, while the wired version comes with three AA batteries that are meant to serve as a backup if your electricity goes out.

How do you get a Nest Protect off the wall?

Push Nest Protect onto the backplate tabs and give it a slight twist clockwise. It’ll CLICK into place. Tip: To remove your Nest Protect (for cleaning or battery replacement), turn it counterclockwise until it disconnects from the backplate.

Does Nest Protect Wired have battery backup?

If your wired Nest Protect stops receiving power from the building’s electrical wiring, it will automatically switch to backup battery power. Even when it’s running off the backup batteries, your Nest Protect (Wired) will stay connected to other Nest Protects in your home.

How long do Nest smoke detectors last?

7 years

Why Nest Protect has an expiry date. All carbon monoxide (CO) alarms expire because their sensors have a limited lifespan. To comply with certification standards, 2nd gen Nest Protect has to be replaced after 10 years, while 1st gen Nest Protect has to be replaced after 7 years.

Is there a monthly fee for Nest Protect?

No subscription required



After you set up and install your alarm system there’s no additional monthly fee to use it. An optional professional monitoring with cellular backup subscription is available for Nest Secure.

Do Nest smoke detectors have cameras?

The Protect warns you if it senses fire or smoke. The Cam transmits video and records video when it senses motion.

Does Nest smoke detector listen?

The Nest Protect smoke detector has a microphone in it. The purpose for this is to listen at the audio announcements and to determine that the buzzer and speaker are working.

Does Nest detect cigarette smoke?

I had to repeat this several times to get the Nest Protect to alarm. First it notifies with a yellow ring that smoke is detected. I had to repeat my candle process a couple more times to get it into full alert mode.