Most locksets only require a #2 Phillips screwdriver. You should not need any special or expensive tools. Just read the directions and follow them. Changing locks is very simple, usually just two screws that hold the inner and outer knobs together and two screws that hold the striker cylinder to the side of the door.

What tools are needed to change a deadbolt?

Tools Needed for the Job

  • A deadbolt tested to meet American National Standards Institute criteria of a grade two or higher. …
  • Drill bit to create a hole for the screws. …
  • Flathead screwdriver to remove and fasten screws.
  • Hole saw to cut a hole for the deadbolt unit. …
  • Metal lubricants help parts move in one smooth motion.

What tools can you use to open a locked door?

Trip wire. A trip wire is a curved tool which every locksmith must have for any job. It’s primarily used to open frozen tumblers (the pins inside a door lock with line up perfectly with the key made to open it).

How do I change my locks quickly?

Changing Locks on a New House in 5 Steps

  1. Take an inventory of all the doors with locks in the house.
  2. Purchase new door knob lock sets at a home center. …
  3. To change the locks, unscrew the door knob from the inside and pull the knobs apart.
  4. Insert the new knobs into the door opening.
  5. Screw the new knobs into the door.

Do you need a drill to change locks?

Drilling is a method of destructive entry, so it should normally be used after other unlocking techniques have been exhausted. That means that using it on a lock, will break the mechanism and require it to be replaced.

Can you change locks yourself?

Replacing door locks is a relatively simple DIY project. If you know your way around a basic screwdriver, you should be able to tackle it in under an hour. Full installation instructions come with the new locks and customer support hotlines are often available to answer any questions.

What is the best way to remove a deadbolt lock?

Quote from the video:
Quote from Youtube video: Once the screws are loose remove both sides of the lock. The deadbolt latch is held to the door with two screws on the edge of the door remove the two phillips screws. Now you can pull out the latch.

How do you change a door lock?

Quote from the video:
Quote from Youtube video: Next step is taking out the screws out of your face plate off the edge of your door. And slide your cylinder. Out. Then pop your new cylinder into the end of the door and throw your screws.

How do you unlock a door without a key in 5 seconds?

Quote from the video:
Quote from Youtube video: I'm going to use two techniques to get into this door the first one is a technique where you can just cut out the plastic from a water bottle or a coke can to get in.

How do locksmiths open locked doors?

Trained locksmiths can pick your door lock with lock-picking tools such as a rake, a tension wrench, a half diamond or a hook. They may use a technique called bumping, which will work on pin tumbler locks, or as a last resort they may use a drill to remove your existing lock.

Will drilling through a lock open it?

Lock-drilling is a last-resort approach to gaining entry to locks that cannot be opened by other means. Drilling a lock will destroy the locking plug, but should leave the mechanism in working order.

What drill bit is for metal?

Cobalt drill bits are used for drilling hard metal and steel. They dissipate heat quickly and are highly resistant to abrasions, making them better for drilling into hard metals than black oxide- or titanium-coated drill bits.

What is cobalt drill bit?

What are cobalt drill bits? Cobalt bits are a combination of steel (or another alloy) mixed with a small percentage of cobalt, typically between 5 – 7%. Cobalt has a melting point of 1495°C and a boiling point of 2927°C, which makes it perfect for use at high temperatures.

How do you change a lock step by step?

Quote from the video:
Quote from Youtube video: That we're going to move from the bolts. After removing it two screws you could now move the front and back end of the lock. Now remove the two short wooden screws holding the lock in place.

Is it hard to change locks on a house?

Changing a lock is a relatively quick project and definitely one of the very first things that you should be doing after moving into your home.

How do you rekey a lock without a kit?

Quote from the video:
Quote from Youtube video: So all you got to do is you just got to just push it through. And then you're going to leave the plug follower. Inside. And then inside here you have your key pins.

Can a locksmith make a key for a lock without a key?

A lock impression allows a locksmith to make a key without decoding the lock. For a qualified locksmith this can be an efficient way to create a new key. A blank key is inserted into the lock and turned. The pins will press against the key leaving marks where cuts need to be made.

How do I change my front door lock?

The instructions are fairly straightforward.

  1. Step One: Remove the Old Door Lock. First, remove the old door lock. …
  2. Step Two: Install the New Lock. First, grab the new latch piece and insert it into the hole along the side edge of the door. …
  3. Step Three: Test the New Lock.

Can you rekey any lock?

You can re-key a lock like a pro at a fraction of the cost. Re-keying kits are available for most lock brands but they’re not interchangeable. You must buy a kit for each brand of lock in your home.

Is it cheaper to rekey or replace locks?

Rekeying your lock is almost always cheaper than replacing a lock. This is because of the cheaper price of the key pins inside the locks, whereas when you replace a lock, you are paying for all brand-new parts.

Is it better to rekey or change locks?

If you’re looking to get better security of your locks, changing them to new, higher security ones will be the way to go. Due to the extremely low price of the key pins in the locks, rekeying is almost always much cheaper than getting your locks changed.