Most likely you have a poor splice of other connection somewhere. Do the outlets use back-stabs for the wires? If so, one of them may not be making a good connection. I’d suggest redoing all of the outlets using the side screws instead.

Why are certain outlets not working?

If your outlet has short circuited or been overloaded, then your circuit breaker may have shut off its power. Check other nearby outlets to see if they are working. If they also are dead, then go to your circuit breaker. When a circuit breaker has tripped, the lever will usually flip to the middle or off position.

Why are my bathroom outlets not working?





Look for any tripped breakers.



Check the main electrical panel to see if a blown fuse causes the issue and if so, replace the fuse and reset the GFCI outlet. Otherwise, check to see if the breaker for the corresponding room has tripped. To determine if a breaker has tripped, look at the buttons inside the breaker box.

Why do only some outlets work?

One or more of your outlets might be affected by a loose wire, which means that the wiring either has gradually loosened over time or was never connected correctly to begin with. This can affect all the other outlets on the same circuit, causing them to malfunction (or rather, stop functioning) as well.

How do you reset an outlet in a bathroom?


Quote from Youtube video: So what that means is this outlet has been tripped now it's a very complicated procedure to reset it basically you put lean over. And you push in the button.

Can a bad outlet cause other outlets not to work?

Old House Circuit Breakers



Many older homes have all of the electrical outlets in a room or an area of the home all connected on a single circuit breaker. With old homes like this, a bad outlet may cause all of the other outlets in that room to stop working because it will trip the breaker.

Why are half of my outlets not working?





A bad connection, outdated wiring, or a tripped circuit breaker can cause a malfunctioning outlet. But there are instances where only half of an electrical outlet works and the other one doesn’t. It can happen for multiple reasons, and it is wise to call an electrician to look into the issue.

How do you know if you have a bad GFCI?

If the GFCI won’t reset or the button doesn’t pop out when you press the “test” button, there may be no power to the GFCI or you may have a bad GFCI. Pro tip: If the “reset” button trips again every time you press it, there may be a dangerous current leak somewhere on the circuit.

What are three warning signs of an overloaded electrical circuit?

Signs of Overloaded Circuits

  • Dimming lights, especially if lights dim when you turn on appliances or more lights.
  • Buzzing outlets or switches.
  • Outlet or switch covers that are warm to the touch.
  • Burning odors from outlets or switches.
  • Scorched plugs or outlets.

How do you know if a GFCI breaker is bad?

Use your voltage tester to see if there’s an occurring current on the outlet you are testing. If the tester lights up, this indicates that the outlet has a flowing current, but if you reset it and it doesn’t trip (the tester stays on), this means you have a bad outlet.

How do you fix an outlet that won’t reset?



If you test and reset your GFCI outlet, but it still won’t stay reset, a good idea is to check the breaker box to make sure the circuit breaker hasn’t tripped. Try resetting the outlet. Once you reset the outlet and it still doesn’t reset, moisture buildup in the wiring or outlet may be the culprit.

How do I test my bathroom outlet?

Quote from the video:
Quote from Youtube video: To start plug in a small lamp or light and turn it on. Next press the test button the light should go off if it does not then something could be defective with the outlet and it should be replaced.

Why do some outlets have a reset button?

Basic Background. The TEST and RESET buttons indicate that the plug offers ground fault protection. As a GFCI (ground fault circuit interrupter) outlet, it is designed to prevent electrical shock and is an important safety feature within your home.

Why are my outlets not working but breaker not tripped?



Yes, the outlet can fail without tripping the breaker – failed or dead outlet means that the power is not present and this can be caused not only by tripped breaker (which is not in this case) but can be also caused by damaged electric breakers, bad/loose wiring, failing connectors, and similar.

Why do my lights work but not my outlets?

It is possible that one of your outlets is damaged or that it has a loose wire. This issue could also be causing other outlets to lose power. It’s similar to old Christmas lights – when one quits working, there’s a chain effect of failures. The outlets in your home may be wired that way.

What happens when a GFCI outlet goes bad?

How to Tell If a GFCI Is Bad. When a GFCI trips, it won’t supply power, so your hair dryer or power saw won’t work, and if a tripped GFCI is at the beginning of a circuit, it will cut power to the entire circuit, so other outlets and lights on the circuit won’t work either.

How can you tell if an outlet is bad?

Watch out for these signs that your outlet is due for a replacement.

  1. Outlet Replacement Sign 1: The Outlet Is Not Working. …
  2. Outlet Replacement Sign 2: Burn Marks or Melting. …
  3. Outlet Replacement Sign 3: Cracks and Chips. …
  4. Outlet Replacement Sign 4: Plugs Fall Out Easily. …
  5. Outlet Replacement Sign 5: Outlet Feels Hot to the Touch.

How often should GFCI outlets be replaced?



between 7-10 years

HOW LONG DO GFCIS LAST? GFCI outlets last between 7-10 years but can sometimes fail after only 5 years. Since GFCIs are one of the most important safety features in your home, it’s important to check your GFCIs monthly and every home should have its GFCIs tested and replaced if necessary every 7-10 years.

Do GFCI outlets wear out?

Electrical safety check



All GFCI outlets have one little-known flaw: their circuitry eventually wears out, usually after about 10 years, at which point they no longer function properly.

Can I replace a GFCI outlet myself?

You’ll need: A new GFCI outlet and outlet plate. A flat head screwdriver, for removing the outlet plate and old electrical outlet. A Phillips screwdriver, for replacing the GFCI outlet, and tightening the connections.

Why does my GFCI trip when I plug something in?



If the GFCI’s internal current transformer senses more than a 4-5 milliamp loss, it instantly shuts down the outlet and any outlets it feeds to prevent accidental electrocution. Most often, when a GFCI “trips” it is the result of a faulty appliance plugged into the outlet or an outlet down circuit.