If a GFCI outlet or circuit breaker is tripping, it is typically because the Neutral connection on the switch is tied to Ground. This is a safety hazard and violation of National Electrical Code. If you are unsure please contact an electrician.

How do you fix a GFCI that keeps tripping?

What to do:

  1. Unplug all appliances on that outlet’s circuit.
  2. Push the reset button.
  3. Plug in one appliance at a time until the GFCI trips. …
  4. Unplug appliances that were on before the GFCI tripped and see if the last appliance that you plugged in still trips the GFCI. …
  5. Replace or repair the appliance that tripped the outlet.





Why is my new light fixture tripping breaker?

When a light switch trips the breaker, a faulty light switch or light fixture is usually the cause. A wire may have come loose at the switch or fixture and is shorting out the hot wire. Always check the switch and fixture first. Also check any GFCI receptacles that are on the circuit for a malfunction or fault.

Can LED lights cause GFCI to trip?

Electrical Problem with an LED Light Tripping a GFCI Outlet



The GFCI Outlet must be wired from the wiring of the same circuit, therefore the wiring must be contiguous, and not connected to other circuit wires because this could cause the GFI Outlet to trip, but there is more to this problem as described below.

Can lights trip a GFCI?

Light Fixture Circuit Wiring



If a light fixture is added to a GFI circuit it should not cause the GFI to trip off, so it would be best to check the wiring connections and make sure that the wiring that is located in the junction box of the recessed can light have not been damaged.

Why does my electric trip when a bulb blows?





When a bulb blows, it’s resistance decreases sharply for a moment, leading to a much higher current being drawn. At this point the filament breaks.

Why does my light switch keep blowing?

A switch is in an improper position when the switch pole screw lies against the switch box and the runner is shorted, which causes the fuse to blow when you turn the lights off. Also, the breaker will trip if the runner short circuits to the ground or neutral wire somewhere along the wiring’s terminus.

Why do my Christmas lights keep tripping the GFCI?

Unfortunately, when it comes to Christmas lights and decorations and GFCIs, generally all it takes to trip a circuit is for a little moisture to get into the outlet, cord, or lights. If this happens and the power is on, the circuit will trip, causing the lights and décor to go out.

Why do my Christmas lights keep tripping?

There are three primary reasons for your breaker tripping: overloaded circuit, short in the wiring, and an old breaker. Breaker failure can happen at any time if your breaker is nearing the end of its life, but overloaded circuits and shorts in the wiring can increase during the holiday season.

Why do my outside Christmas lights keep tripping?



The circuit breaker is designed to protect circuits from being overloaded with too much electricity and starting fires. When you demand more electricity from a circuit than what is considered safe, the circuit breaker trips and automatically shuts off the power for your home.

How do I stop my outdoor Christmas lights from tripping the GFCI?

Fortunately, there’s a number of ways to help reduce the chances of GFCIs tripping when it comes to the connection points.

  1. Make sure all connections are tight and completely plugged together. …
  2. Do not allow connections to be buried in ground cover or mulch. …
  3. Do not allow connections to sit in low areas where water gathers.

Why do my outside lights keep tripping when it rains?

When extension cords are left outside over time, they can become frayed or cracked. Water from a sprinkler or rainstorm can make its way in, causing a short and making the circuit breaker trip.

Should you tape Christmas light connections?



Don’t assume all lights are designed for outdoor use; wrap all connections between strings with electrical tape to keep moisture out. Always plug lights into a covered outlet protected with a ground-fault circuit interrupter (GFCI)—running cords from inside the house through a window or a mail slot is a fire hazard.

Why do my Christmas lights fuses keep blowing?

The main reasons why your Christmas lights keep blowing a fuse include using multiple strands of lights, using the wrong type of lights or using damaged lights.

How do you fix a blown fuse in Christmas lights?

Youtube quote:So you can use whatever tool is best for you poke these in all right you can just use your finger to push that back in all right I'll grab this plug it in and voila we have a full set of lights.