May be same as Broan 750, but the Broan manual implies using the housing to draw the opening required, while the NuTone specs do call out 13-1/4″ opening.

Is Broan and NuTone the same?

Nortek, Inc., the parent of Broan Manufacturing, announced plans to buy NuTone, Inc., a subsidiary of Williams PLC of London, for $242.5 million in cash.

How do you replace a Broan vent fan?

Quote from the video:
Quote from Youtube video: So very easy to replace these broan models that they go out and in this case you can see that when whoever installed this left a gap between the unit itself and the drywall.

How do I know what NuTone fan I have?

NuTone Standard Bath Fan

Remove the grille by pulling down 2 inches. Reach behind the grille and squeeze the mounting springs to remove the grille. The model label is located in the corner closest to the outlet. Some fans may have the model stamped into the motor plate instead of a printed sticker label.

Is Broan a good fan?

Best Budget: Broan 688 Ceiling and Wall Ventilation Fan

Broan makes an efficient and affordable bathroom exhaust fan that’s a good pick for homeowners on a budget. The Broan 688 is rated for 50 CFM and is the best fit for small bathrooms of under 50 square feet.

Does Broan make NuTone?

Headquartered in Hartford, Wisconsin, Broan-NuTone employs over 2,500 around the world. Broan-NuTone products can be found in more than 110 million homes across the United States under Broan-NuTone, Broan, NuTone and BEST Range Hoods brand names.

Is NuTone out of business?

NuTone is exiting the intercom business.

How do you remove an old nutone bathroom fan?

How to Remove a Nutone Bathroom Vent

  1. Step 1: Shut Off Power to Vent. …
  2. Step 2: Remove the Cover. …
  3. Step 3: Pull Blower Plug From Housing. …
  4. Step 4: Test Wires With a Voltometer. …
  5. Step 5: Disconnect Wires From Nutone Assembly. …
  6. Step 6: Remove Housing Screws or Nails. …
  7. Step 7: Pull Fan From Ceiling Space.

How do I get rid of Broan fan housing?

Quote from the video:
Quote from Youtube video: Many bathroom fans use a simple metal wire system to hold the outer cover in place hold down on the cover. Now pinch the metal clips and remove.

How many CFM do I need for my bathroom fan?

For medium-sized bathrooms, use 80 to 99 CFM bath fans. For large bathrooms that are over 100 square feet but under 150 square feet, use over 100 CFM bath fans. For extra-large bathrooms, add 50 CFM for every toilet, 50 CFM for every bathtub or shower and 100 CFM for a jetted bathtub.

Is NuTone a good bathroom fan?

The best bathroom exhaust fans effectively remove moisture, humidity, and odors from the air. Among the top picks, the Broan-NuTone bathroom fan stands out for its quiet operation, ease of installation, and HVI-certified ventilation performance.

Are all bathroom fans the same size?

But are bathroom fans interchangeable? Bathroom fans are interchangeable so long as you replace your fan with one of the same size and type. You should consider the fan’s ability to move air expressed in CFM (cubic feet per minute), duct length and size, housing size, sound, and features like humidity sensors.

Which is the best exhaust fan for bathroom?

Best exhaust fans for bathroom

  • Luminous Vento Deluxe 150 mm Exhaust Fan for Kitchen, Bathroom, and Office. …
  • Havells Ventil Air DX 200mm Exhaust Fan. …
  • V-Guard Aerotide Exhaust Fan. …
  • Spartan Pro Vento Exhaust Fan. …
  • Crompton Brisk Air 150 mm (6 inch) Exhaust Fan for Kitchen, Bathroom and Office.

How do I know what size bathroom exhaust fan I need?

The rule of thumb is that you need at least 1 CFM per square foot of room area. To determine the square footage of your bathroom, multiply the length times the width. For example, if your bathroom is six feet wide and nine feet long, its square footage is 54. Therefore, it should have a fan rated for at least 54 ​CFM.

Is more CFM better bathroom fan?

But O’Brian suggests a simpler rule of thumb: For bathrooms less than 100 square feet, “You can just go with 1 CFM for every square foot of floor area,” he says. For example, if your bathroom is 80 square feet, you’ll need an 80 CFM fan, such as the Broan SmartSense 80 CFM Ventilation Fan (available from SupplyHouse).

What does 2 Sones sound like?

According to this, 2 sones is equivalent to 37.99 decibels, which is between the volume of a whisper and that of soft music.

Is 3 sones loud for a bathroom fan?

A sone is defined as a unit of sound or loudness. Sones are used to measure noise, such as fans, which includes kitchen fans, bathroom fans, and those found in your range hood.

Defining the Sones Rating.

Sones Decibels
1 28
2 37.99
3 43.84
4 47.99

What is the quietest sone rating?

The quietest fans have sones of 1.0 or less. Fans rated 1.0 to 2.0 are also very quiet. Fans rated 2.0 to 4.0 are often more affordable and slightly more noisy. Fans rated at 4.0 or above would not be described as quiet.

How many sones is a quiet range hood?

four to five sones

How many sones is a quiet range hood? A quiet range hood is about four to five sones, or about 50 dB at max speed. Lower speeds on quiet hoods can get down to just one sone! Most hoods range between seven and nine sones, depending on the quality of the materials and CFM.

Is higher CFM better for range hood?

For high-output gas ranges or cooktops, the minimum rate of 1 CFM of ventilation per 100 British thermal units (BTU) is recommended. For example, if your high-output burner output is 45,000 BTU, look for a range hood that provides 450 CFM to best clear the air. However, the higher the CFM, the louder the hood will be.

Who makes the quietest range hoods?

9 Quietest Range Hoods

  • 1) BROAN NuTone BCSQ130SS Under Cabinet Range Hood. …
  • 2) IKTCH 36″ Wall Mount Range Hood. …
  • 3) Cosmo 668ICS900 Island Range Hood. …
  • 4) IKTCH 30″ Wall Mount Range Hood. …
  • 5) Hauslane – Chef Series WM-538 Wall Mount Range Hood. …
  • 6) Empava 36″ Island Range Hood.