Wiring a 3-way switch

Where do the wires go on a 3-way switch?

Quote from the video:
Quote from Youtube video: Now you're going to connect the neutral wire from the power coming in to the neutral wire in the common cable between the two switches. Now you're going to connect the red wire and the black wire.

Where does the red and black wire go on a 3-way switch?

The black hot wire connects to the far right switch’s common terminal. Red and blue wires link traveler terminals of both switches. The red wire, which is connected to the first switch’s common terminal, leads back to the fixture.

What happens if you wire 3-way switch wrong?

If you don’t correctly connect this wire, then your lights won’t work from more than one switch. Grounding the switch: You’ll also need to locate the ground wire and connect it to the switch too.

What color wire goes to the black screw on a 3-way switch?

Tighten the terminal screws. Connect the ground wire to the green screw, then connect the wire marked common to the black or dark colored screw. Connect the two remaining traveler wires to the two brass or light colored screws.

Can I connect red and black wires together?

These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.

Does the red wire connect to black or white?

Attach the black wire to the outlet you want to always be on (usually the top one) and the red wire to the switched outlet. Connect the white wire to either of the chrome screws (remember, they are still joined) and the ground wire to the green ground screw.

What color wires go on a 3-way switch?

3-Way Switch Wire Colors



There is no standard for wire colors on 3-way switch travelers. The colors will vary depending on whether NM cable or conduit was used. With NM cable, the wire colors for travelers will be black and red using 3-wire cable. With conduit, the wire colors for travelers could be any color.

What color is the load wire on a 3-way switch?

black

In a 3-way configuration, the “Line” wire should be connected to the “Common” terminal of the Brilliant Control. Load Wire: This is the wire that connects your switch to your light bulb or other “load” (ie: a fan or other appliance). It is also usually black.

What do you do with the red wire?

The exact purpose of a red wire for a light fixture can vary. Except in rare cases, it is a hot wire or a switched hot wire. Check the wire with a non-contact voltage tester with the power and switch turned on. If the tester indicates the wire is hot, turn the switch off and retest.

What does black screw on 3-way switch mean?

This screw serves one of two purposes depending on where it is positioned in the circuit run: Either it accepts the incoming black (hot) wire from the power source, or it connects to the black (hot) wire that leads onward to the light fixture.

What are the terminals on a 3-way switch?

A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.

Does it matter what wire goes where on a light switch?

In the case of a single-pole switch, these wires are interchangeable—it doesn’t make any difference which wire is attached to which screw terminal. Inside the switch is a metal pathway that closes when the switch is in the ON position and opens to interrupt the flow of power when the switch is turned OFF.

What does L1 and L2 mean on a light switch?

Two way switches have a COM terminal as well as L1 and L2 terminals. When L1 is off L2 would be on. When L1 is on L2 would be off.

Does the black wire go to L1 or L2?

The incoming circuit wires that provide the power are referred to as the line wires. L1 (line 1) is a red wire and L2 (line 2) is a black wire.

What wire goes to L1 and L2?

The yellow wire goes into the common terminal, red goes into the L1 terminal and blue goes into the L2 terminal. The grey wire goes in the common terminal, the brown wire goes in the L1 terminal and the black wire goes in the L2 terminal.

Does live wire go to common or L1?

The faceplate of a single, one-way switch has two terminals: “L1” is the terminal to which the neutral core wire is attached – the blue wire (traditionally black, before the change). “COM” or “Common” is the terminal to which the live core wire is attached – this is the brown wire (formerly red).

What happens if you wire a light switch wrong?

But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work, but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.

What Colour wire goes to L and N?

US AC power circuit wiring color codes