How do you wire a bathroom exhaust fan with light?

Quote from the video:
Quote from Youtube video: Box this is hot only when the switch is on and then we have the blue wire which goes to the light. And we have the black wire that goes to the fan. So we just flip up all three of the connectors.

Can a bathroom fan and light be on the same switch?





It is not a bad idea to connect the bathroom fan and light in your home on the same switch. It is safe to operate both at the same time. Running the fan in the bathroom is one of the best ways to prevent mold from growing in your bathroom. Mold in the bathroom is a result of the condensation of hot water.

Can you wire a fan and light together?

Powered Ceiling Fan and/or Light Without Any Switches (No Switches) As you can see, this simple connection feeds power to both the fan and (optional) light kit. The ground and neutral wires simply get tied together as you’d expect.

How do you wire a bathroom exhaust fan?

Quote from the video:
Quote from Youtube video: And get it ready for installation. It's a good idea to prep the bathroom. So cover the work area with a drop cloth. Then turn off the power to the fan at the main electrical box take off the grill.

What is the blue wire for on a bathroom fan with light?

The blue wire is the hot wire for the ceiling fan light fixture.

Where does the blue wire go on a bathroom fan?





IF YOU ARE IN THE US… the Black and blue wires are the HOTS for the Light and Fan This allows for them to be controlled separately if desired. If you want them both to go on with the switch, they both connect to the Black Hot wire (which should already be the switched one from your light switch).

How do I wire a light and fan to one switch?

Wiring Ceiling Fan and Light Operated With One Switch

  1. Connect the green/bare copper wires together.
  2. Connect white wires together.
  3. Connect black wires together.
  4. Connect the lighting wire, typically blue, to the black fan wire and the black ceiling wire.
  5. Tuck the wires back into the box.

Does a bathroom exhaust fan need its own circuit?

Bathroom Circuits



If the vent fan has a built-in heater, it must have its own 20-amp circuit. This is called a “dedicated” circuit because it serves only one appliance or fixture. Heat lamps, wall heaters, and other built-in heating appliances may also require dedicated circuits.

Should exhaust fan and light be on same switch?

You can run your bathroom fan on the same switch as your lights. It solves other problems, so it’s not a bad idea even if you have two switches. This kind of arrangement isn’t a bad idea anyway. It’s safe to assume if someone is in the bathroom, the light is on.

How many wires are needed for a bathroom fan?



Wiring Considerations



Most bathroom ventilation fans use a 15-amp circuit breaker and 14-gauge wiring. Due to the increased power drawn, fans with heaters usually require a 20-amp circuit breaker and 12-gauge wiring. Use the manufacturer’s electrical specifications to confirm this.

What is the red wire on a bathroom fan?

Use the red wire in the 3-conductor cable to put the light and fan on different switches. Connect the hot wire from the fan to the black wire from the switch and the hot wire from the light to the red wire from the switch. The hot wires in the unit may be colored differently.

What do I connect the blue wire to?

The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch.

Can I connect blue and black wires together?



If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.

Can I connect red and black wires together?

These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.

Are blue and red wires the same?

Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.

Which color wires go together?

See Table below. The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active.



US AC power circuit wiring color codes.

Function Line, 3-phase
label L3
Color, common blue
Color, alternative yellow

What happens if you switch red and black wires?



If you switch the red and black speaker wires, all that happens is that the drivers push out instead of pulling in (and vice versa). When the rest of the speakers in your system are creating the same sound, their drivers will be going in a completely different direction (exactly opposite).

What do I do with the red wire when installing a light?

Red wires are usually used as secondary hot wires. Red wires are also hot and should be clearly marked to avoid the dangers of electrocution. Red wires are commonly used when installing ceiling fans, where the light switch maybe.

Does the red wire go with black or white?

Attach the black wire to the outlet you want to always be on (usually the top one) and the red wire to the switched outlet. Connect the white wire to either of the chrome screws (remember, they are still joined) and the ground wire to the green ground screw.

Does the red wire need to be connected?

Normally you’ll see a red wire in places you would expect a ceiling fan. But in places like a bathroom or a wall light, if you see a red wire, it’s a good bet that the red wire is the wire that’s connected to the light switch.