What boards do you use for loft?

We’d recommend using purpose-built loft boards as they tend to have tongue and groove fittings for easy installation, and they are also often shorter, so easier to get through your loft hatch.

Can you board straight onto loft joists?





Can I Board directly onto joists? The simple answer is no. The most common joist heights in use in modern properties are between 75mm and 100mm.

Can I lay floor boards in loft?

The best way to lay a floor in your loft for storage is to lay floor board panels. We show you how to board a loft by laying out tongue and groove loft boards in your loft and supporting them on joists for a secure and sturdy storage space.

What is the best way to board a loft?

Quote from the video:
Quote from Youtube video: Place the first sheet on top of the loft legs. And drive a screw through the chipboard landing. It anywhere on the top platform of the loft. Leg. Continue driving the screw through the chipboard.

How thick should loft boards be?

Standard loft boards come in two different sizes; 2,400mm x 600mm and 1,220mm x 320mm; both of which are 18mm thick.

Is it OK to board over loft insulation?





By boarding over your loft insulation, you can create a lot more storage space whilst creating a safe and stable environment. Despite this being an extremely effective solution, it is important to complete the process to the best standard to ensure that your loft insulation isn’t compromised.

Does a boarded loft add value?

The biggest loss of heat in a building is through the roof, and boarding your loft strengthens the insulation. A boarded loft is also likely to add value to your home — a mixture of energy efficiency, convenience and the simple fact that it looks a lot nicer than a loft with bare joists.

Do you need planning permission to board a loft?

For a loft conversion to be considered permitted development, not requiring planning permission, it must: Not exceed the volume allowance of 40 cubic meters of additional space for terraced houses, or 50 cubic meters for detached and semi-detached houses.

Should loft boards be staggered?

Lay Out Your Loft Boards



Try to lay out your loft boards in a staggered pattern. This is important because you don’t want the joints in all your loft boards to meet up as this could compromise its structure. The best screws for the job include 4mm x 30mm countersunk multi-purpose screws.

Is 18mm chipboard OK for loft?



18mm is fine for storage,you could try 22mm but consider the extra weight.

Can you use MDF to board a loft?

Start at one corner and lay your loft panels directly on top of the loft legs at 90 degree angles to the direction of the ceiling joists. Then when in place and laid square, attach them to the loft legs using the same 30mm screws.



MDF Cut To Size 7-10 Working Days
Wardrobes 20-25 Working Days

How hard is it to board a loft?

Loft boards are fixed together relatively easily, but working withing the confines of the loft’s available space can make boarding a loft a tricky endeavour. Do heed the safety advice detailed below and only attempt the task if you are capable. If not, hire a professional.

Can I board my loft and use it as a bedroom?



Can I board my loft and use it as a bedroom? If you’re converting your loft into an extra bedroom, or a room that is considered a living space, the work will have to meet the government’s Building Regulations. The room must be accessible via a permanent staircase and must have the correct fire regulations.

How long does it take to board a loft?

The average time it takes to install loft boarding is between one and two days. Installing loft boarding is an intricate undertaking that is best performed by a professional. Loft boarding is an ideal and cost-effective, space-saving solution.

How do you board a loft ceiling?

Quote from the video:
Quote from Youtube video: And then following where you've marked up screw each loft leg into place once you've put all your loft legs in and you've got a grid like pattern you then need to roll your insulation.

Does boarding your loft cause condensation?

How Standard Loft Boarding Can Damage Your Property. Can cause damp – as standard boarding is placed onto the joists of your roof, this will inevitably squash your insulation, which stops it from working and will cause condensation to build up as it doesn’t have room to breathe.

How do you cover a loft opening?



For a versatile, inexpensive privacy option in your loft, curtains or fabric panels may work well. With tracks installed in the ceiling, you can hang the panels around specific areas of the loft, such as your bedroom or home office, so they’re not visible from the rest of the space.