2 Answers. Show activity on this post. No, gypsum board is not required on the ceiling, unless 1) HOA requires gypsum board for fire protection, 2) local Planning Department requires it due to proximity encroachment to property lines, 3) you live in a building with more than 3 units.
Can you use tongue and groove instead of drywall?
In contrast, wooden tongue-and-groove paneling offers a tantalizing drywall alternative: a gorgeous natural-wood ceiling with an installation process that is somewhat easier than drywall because the boards fully stretch from one end of the room to the other end.
What do you put on tongue and groove ceiling?
Quote from Youtube video: You will see how eventually we use exterior wood filler to fill all the face nails.
Can you use tongue and groove on ceiling?
Start with battens on finished ceilings
If you’re installing tongue and groove boards over drywall (or plaster especially), it’s a good idea to install 1×2 battens and fasten them directly to the framing with 2-1/2-in. screws. They’ll give you a much more solid nailing surface.
How do you install tongue and groove pine ceiling?
Quote from the video:
Quote from Youtube video: And hey look we're having somebody put up a tongue and groove pine ceiling. And hey look it's a tongue and groove pine ceiling. But no one actually said how so this is how to do a tongue root pine
Are wooden ceilings a fire hazard?
Since then, the most serious problem that has always accompanied the use of wood walls, wood panelling and wood ceilings is the risk of fire.
Is drywall required under wood paneling?
Drywall under the tongue-and-groove wood would give sound insulation, act as a fire barrier, and confer shear strength. Look up construction techniques for installing paneling. Minimal taping and bedding would be required under paneling. Since this is a wall between bedrooms you might consider adding sound insulation.
What is the difference between shiplap and tongue and groove?
Tongue and groove paneling needs to be fitted together and secured through the tongue, which can be tricky if you are not experienced with it. Shiplap, on the other hand, just needs to be secured on the overlap and doesn’t need to fit together perfectly. Just make sure each plank is level before nailing it to the wall.
How do you install a wood plank on a ceiling?
Quote from the video:
Quote from Youtube video: And cut the last row of planks to fit leaving a 3/4 inch gap between the plank and the wall. Use a single screw to support the cut edge of the plank. Once all of the planks are installed.
How do you attach a tongue and groove board?
Hang each board of the first and every successive row, always ensuring the board is the proper length or height before attaching. Butt edges together in the same row, and slide the groove of the next board over the previous tongue for each following row. Nail only the tongue side for each row after the first.
Do you stain tongue and groove before or after installation?
Tongue-and groove-ceilings must be stained before installation for best results. If, however, the builder hung the roof without staining it first, finish the ceiling in the method suggested in the tips section. Then you’ll have to touch up the unstained portions of the tongue as they become exposed over time.
How much does it cost to install tongue and groove ceiling?
The average cost to professionally install tongue and groove pine ceiling planks, including material and labor fees, ranges from $4 to $8 per square foot. If you plan to install your ceiling as a DIY project, expect to pay $3 to $4 per square foot on average.
What kind of wood is used for tongue and groove ceiling?
Just about any wood plank can be used to make a tongue and groove ceiling. The most popular wood is pine, but they also come in cedar, oak and spruce. Any wood board can be turned into a tongue and groove plank with a router.
What is the average price for tongue and groove?
Tongue and groove typically costs between $1.25 — $1.60 per linear foot, or around $2.50 to $3.00 per square foot. What is this? Some wood species, like cedar, will cost you way more than yellow pine or spruce.
What kind of wood do you use for a porch ceiling?
Plywood is also a popular choice for porch ceilings because it is inexpensive and comes in large sheets that minimize installation time. Plywood can also be painted to match your porch. When choosing plywood for a porch ceiling, choose a quality, exterior-grade product to give you the longest-lasting ceiling possible.
How do you seal pine tongue and groove?
Water-based polyurethanes and acrylic lacquers will allow you to maintain the integrity of the natural look more than most other finishes. To apply polyurethane, use a fine brush, cloth, or pad. Again, for best results, follow the instructions on the label.
Can you put wood flooring on the ceiling?
Wood flooring planks can also be installed on an exposed ceiling. Contractors recommend mounting plywood to the joists to create a flat nailing surface. This type of layout allows the planks to run in any direction, even diagonally or in a pattern.
What material can be used for porch ceiling?
Porch ceiling materials
The four materials commonly used for porch ceilings are wood, plywood, beadboard, PVC, and composite materials. Each of these materials has its pros and cons. Wood: This material is still a top choice because of its unwavering classic touch.
Can you use Sheetrock for patio ceiling?
USG Sheetrock® Brand Exterior Gypsum Ceiling Board is an ideal surface material for sheltered exterior ceiling areas.
Should a porch ceiling be insulated?
If you have an enclosed porch, you should consider insulating the ceiling. When you have proper insulation, it will provide temperature regulation. In the winter, it will help keep your enclosed porch warm, while in the summer, it will keep the air conditioning in.
