What size is a refrigerator water line fitting?

The tubing should have a diameter of 1/4-inch and can be copper line, braided steel line or plastic tubing. Many professionals prefer copper line, but plastic tubing is commonly sold as part of ice maker installation kits.

How do you connect plastic tubing to refrigerator?





Quote from the video:
Quote from Youtube video: So that they're very tight on both sides. So you need to make sure that you got your refrigerator pulled out straight so you could slide it straight back in when you're done.

How do you splice a plastic refrigerator water line?

Quote from the video:
Quote from Youtube video: You can see the old broken supply. Line we're gonna put a little rag on the floor here. And we're going to use this adjustable wrench to remove the connection from the refrigerator.

How do you connect the waterline to the refrigerator?

Quote from the video:
Quote from Youtube video: Remember to orientate the ferrule in the right direction tapirs side towards the like you see here. So insert the tube into the valve.

What type of water line is best for refrigerator?

The Best Choice: Stainless Steel Tubing



Overall, stainless steel tubing is my recommendation for your fridge’s water line.

What size is faucet supply line?





A standard residential faucet supply line has a 3/8-inch compression fitting on one end and a 1/2-inch female NPT fitting on the other.

How do you connect plastic tubing?

Quote from the video:
Quote from Youtube video: Let's put cement on the fitting and the PVC pipe and inside of both ends of the coupler. I'm going to put the coupler on the pipe. First little quarter turn for a good seal.

Can you use a brass ferrule on plastic tubing?

Brass ferrules are normally used on copper tubing and can cut into the soft plastic supply line.

Can I use plastic tubing for ice maker?

Answer: You’re right to be concerned, because plastic tubing to an ice maker is susceptible to cracking and splitting. The constant flow of hot air from the compressor fan in the essentially unventilated space behind the fridge blows over and around the tubing — and eventually makes it quite brittle.

How do you tap into a PEX water line?



Quote from the video:
Quote from Youtube video: I just line up that cutting wheel with your mark snap it shut on the pipe and then spin it until you cut through the pipe. Then make sure you take some sandpaper clean any burrs off both sides.

What can I use instead of a saddle valve?

A similarly DIY-friendly but more reliable alternative to a saddle valve is a push-fit tee connector designed for ice makers and water dispensers. You install these by cutting out a short section of pipe and installing the tee right into the water line, then adding the small supply line leading to the appliance.

How do I hook up the water line to my Frigidaire refrigerator?

Quote from the video:
Quote from Youtube video: On the refrigerator remove the cap on the water valve. Take the other end of the supply line and install it onto the water valve to tighten it turn it a quarter to a half inch. Do. Not over tighten.

Is polyethylene tubing safe for drinking water?



Linear low-density polyethylene (LLDPE) tubing is perfect for potable water, food and beverage, and pneumatic compressed air applications.

How do I connect my PEX to my refrigerator?

Quote from the video:
Quote from Youtube video: It's made so it'll slide on to half-inch copper or on to pecs the plastic PEX lines. Either way so it'll work on either one of them and this particular valve is made by push and connect.

What is PEX water line?

Quote from the video:
Quote from Youtube video: Похожие запросы

Are all refrigerator water lines the same?

While water supply lines to refrigerators can be made of different materials like copper, plastic types and braided stainless steel, the good news is with adapters, most ice-maker supply lines should be able to connect to most refrigerators.

What size is the water line on a Frigidaire refrigerator?



White Dispenser Water Tube. This 5/16″ tube runs from the dispenser and connects to a green 5/16″ tube on the back of the refrigerator.

What size is the water connection on a Samsung refrigerator?

1/4 inch

Water lines are typically sold in kits and are not included with the refrigerator. We recommend using a water line installation kit that uses 1/4 inch copper tubing, a 1/4 inch compression nut, and a ferrule.

What size is LG refrigerator water line?

5/16 of an inch



It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or if it will not dispense water or ice, you may have a damaged water line.

How do I connect my LG refrigerator water connection?

Quote from the video:
Quote from Youtube video: First make sure you are using a standard water line tube. You may have a different size or type of water. Line in this case you will need to use an adapter or connector.

Do LG refrigerators come with water line?

Water line is not included. You have to purchase that separately.

How do you replace the water line on an LG refrigerator door?

Quote from the video:
Quote from Youtube video: So right up front will open the freezer. Door you have this panel right up here all i did was unscrew it there's one phillips head right there.

How do you replace a refrigerator water dispenser tube?

Quote from the video:
Quote from Youtube video: So just grab the bracket. And use that to pull the water line through the dispenser. Once you have the end of it through the dispenser. We can pull it out of the refrigerator.

How do you replace a GE refrigerator water line?

Quote from the video:
Quote from Youtube video: Before you begin the procedure unplug the appliance's power cord. And shut off the home's water supply line valve. Have an assistant help you to move the refrigerator. Away from the wall.