Can you put a toilet in front of a baseboard heater?
There should be at least 24 inches of clear space in front of a toilet or bidet. Sourced from This Old House, emphasis mine. If you have the clearance, do 15″ from baseboard heating housing.
Can put electric baseboard behind a toilet?
If it’s an electric baseboard heater it can be relocated ,the toilet can be installed . The heater can be placed elsewhere.
What is the difference between a 10 inch and 12 inch rough-in toilet?
Most toilet bowls will work with either a 10″ or a 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance. Because 10″ rough is more rare these days, a 10″ rough toilet tends to be more expensive.
Can you use a 12 inch rough-in toilet?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
Can I put a baseboard heater in a bathroom?
Although it is possible to install an electric baseboard heater in the bathroom, an electric wall heater is a much better choice for several reasons.
Can I put heater in toilet?
Many electric heaters are often not protected against the ingress of water due to their design. They are open devices through which air must flow to generate heat and distribute it around the room. Therefore, installing these heaters in a bathroom is not safe.
Can you put electric heater in bathroom?
CPSC said that most electric heaters do not have protection against electrocution should the appliance come in contact with water. For this reason, electric heaters should not be used in bathrooms.
How close can a baseboard heater be to a bathtub?
(2) A manually operable control for an electric heater in a bathroom shall be located at least 1 m from the bathtub or shower stall, this distance being measured horizontally between the control and the bathtub or shower stall, without piercing a wall, partition, or similar obstacle.
Can you use a 10-inch rough-in toilet on a 12-inch rough-in?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
What does a 10 rough-in toilet mean?
When you wonder about ‘what a 10-inch rough-in toilet means’, it refers to the finished wall and the floor flange opening center distance of about 10-inches. 10-inch rough-in is usually found in the old models’ homes. Although, there are only fewer toilets options available.
How far from the wall should a toilet rough-in Be?
In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.
Should a toilet tank touch the wall?
There is no hard-fast rule about whether a toilet should touch the wall, as it is a matter of personal preference. Some people are okay with a toilet tank’s top touching the back wall, while others desire a minimum of one inch of space between the commode and the back wall.
How do I know the rough-in size of my toilet?
Toilet Rough-In Measurements and Standards
Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.
Can I move a toilet a few inches?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
Can a toilet be moved 6 inches?
Questionably, can a toilet be moved 6-inches? Indeed, yes! You can move the Toilet at 6-inches without changing the waste line and stack using an offset toilet flange. It needs plenty of plumbing work and investment to re-install the waste line and stack.
Can you turn a toilet 90 degrees?
Quote from the video:
So the two problems I see with rotating a toilet will be that it could hit the wall. The toilet tank could hit the wall or another part of the toilet could hit the wall you wouldn't be able to rotate.
What is toilet offset?
Unlike a standard flange, which is centered on the waste pipe, an offset flange is off-center—that lets you shift the location of the toilet by a couple of inches (left, right, forward or back).
How many inches does an offset toilet flange move?
12-inches
The typical offset is 12-inches for most residential toilets. As a result, the toilet had 4-inches behind the tank. It looked like it was trying to participate in the activities of the bathroom rather than sit quietly until needed.
How do you offset a toilet flange?
Quote from the video:
So you can see down here you can see where the pipes at right here and we're using this nifty little tool here to cut the 3 inch PVC. Down. While it's already in the floor.
