What is a standard size alcove bathtub?

60 inches x 32 inches





The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high.

How do you know what size bathtub you need?

When measuring height, measure from the floor outside of the tub to the top of the tub fixture. Do not stand inside the tub when making this measurement; instead, stand outside the tub and measure from the bathroom floor. The width of the tub will complete the measurements of the bathtub dimensions.

What is the difference between a bathtub and an alcove bathtub?

The term alcove doesn’t refer to the shape or size of the bathtub, but the installation. Alcove tubs are unfinished on three sides with the fourth side, usually one of the long sides, finished with a tub apron. The tub gets installed into an alcove section of the bathroom with three of its sides enclosed by a wall.

How do you measure an alcove tub?

Using a power tape, measure the edge of the tub from one end to another for height and width. To measure the height of the bathtub, take measurement from the floor to the top.

What are the different sizes of bathtubs?





60 inches long (5ft), 30 inches wide (2.5ft) with a water depth of around 30 inches (2.5ft). Smaller sizes typically run 48 inches long (4ft), 28 inches wide (2.3ft)with a water depth of around 30 inches (2.5ft) Large sizes run 60 inches long(5ft), 36 inches wide (3ft)with a water depth of around 30 inches(2.5ft).

Are there bathtubs shorter than 60?

A small bathtub typically measures less than 60 inches but still provides plenty of room for a soothing soak. We researched the best small bathtubs on the market, evaluating installation type, materials and design, and overall value.

What is difference between alcove and drop in tub?

Drop-in bathtubs are installed anywhere a carved out deck or structure is implemented, often times in the center of the bathroom. Alcove bathtubs on the other hand, are installed in a recess, against the wall or an alcove.

How big is a soaking tub?

60 to 72 inches



Typical soaking tubs range in length from 60 to 72 inches. It’s common for the average soaking tub to hold around 250 gallons of water. Soaking tubs are available as single- or two-person bathtubs.

What is the inside width of a standard bathtub?

The interior measurements of a regular bathtub are 45 inches long by 22 inches wide and up to 18 1/2 inches deep. If the tub is filled to the brim, it can hold up to 24 gallons of water, but most individuals only use 10 to 16 gallons of water for bathing.

How do I measure for a new tub surround?

Quote from the video:
Take your tape measure and place the end right up against the far corner sheetrock of your shower space you want a measurement that will give depth to your shower.

What is alcove installation for bathtub?



The term refers to the bathtub being installed into a recess in your bathroom, which means quite commonly they are installed with three joining walls or a pocket alcove in your bathroom, with some modern designs only having two walls or a large window to remove the confined nature of this installation method.

How is bathtub depth measured?

To find the soaking depth of a tub, measure the inside wall of a bathtub from the base to the overflow drain at its deepest point. The most common bathtub soaking depth is 14″ – 17″. Once you’ve calculated your desired basin size, consider the volume of water it will take to fill.

How deep are standard bathtubs?

The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep. Small alcove tubs are available for smaller bathrooms, which are anywhere from 48 to 55 inches in length.

What is the average depth of a soaking tub?

Soaking tubs are designed for long, comfortable soaks, so they’re deeper than the typical tub. Standard tub depths allow for approximately 12” of water; soaking tubs should offer at least 14” or more so that the water covers the majority of the bather’s body.

How deep is a deep bathtub?



14 to 17 inches

A standard bath tub is 14 to 17 inches in depth. A European style is 18 inches deep and a Japanese (or Greek) style is 22 or more inches in depth. There are numerous makes and models of bath tub styles including built-in, freestanding, soaking, and whirlpool. These tub styles have only frontal exposure.

What is a deep bathtub?

A deep soaking bathtub is a compact bath that is shorter but deeper than conventional baths. Essentially, it relies on depth rather than length for its capacity and comfort.

How can I make my bath deeper?

How to Make a Bathtub Deeper – Ideas You Can Use

  1. Make Use of a Better Bath Deep Water Bath.
  2. Sugru Moldable Glue Can be Used to Plug the Overflow Drain Hole.
  3. Install a Drain Cover Plate on the Overflow Drain.
  4. Cover the Overflow Drain Hole with a Caulk Strip.
  5. Get a New Bathtub.
  6. What happens to the tub overflow?

What is the difference between a bathtub and a soaking tub?



A soaking tub is a freestanding bathtub that is typically oval in shape with enough water depth to allow for total submersion. The purpose of this is to cover your body with water, meaning you will no longer have your knees or arms exposed to the cold compared to more traditional bathtub designs.

Are soaker tubs worth it?

Soaking tubs can be a great benefit to a bathroom if the homeowner enjoys a bath,” says Willetts. “Relaxing in water is a great way to relieve stress.” While the most common place to install a soaking tub is a big master bathroom, homeowners who live in mild climates choose to put them outside as well.

What size is a Japanese soaking tub?

Japanese soaking tub dimensions vary from model to model, but they are typically at least 27” deep to allow bathers to immerse completely while seated. The tubs – which are usually square or round, occasionally rectangular or oval – are typically no more than 4.5′ in diameter; most are smaller.