How do you make sure 2 holes are level?

Simply: Mark your first hole. Use your spirit level (assuming its a good one and not a tiny boat level etc) to mark a horizontal line from the first hole out towards the second hole position. Flip the level around 180 degrees lengthways and continue the line towards the second hole.

How do you align ceiling lights?





Quote from the video:
Quote from Youtube video: Put a mark then we'll measure 80 inches or six foot eight inches and put another mark and then where they intersect. That's where we'll put our lights.

How do you install a light fixture screw?

Quote from the video:
Quote from Youtube video: You may also have a ground wire connected to your bracket. Loosen the green screw and remove the ground wire remove the mounting bracket from the junction.

How do you move a ceiling light?

Quote from the video:
Quote from Youtube video: For mounting the light in a new location you will need battery power drill a razor blade electrical tape a snake and a mounting block mounting.

How do you drill holes at the same level?

Quote from the video:
Quote from Youtube video: Level simply take a little bit of blue tack. And the spirit indicator. And attach it to the top of your drill ensure that the bubble indicator is positioned in between the two guidelines.

How do I make sure my drill is level?





For accuracy, make sure your work surface or the workpiece is level by checking with a regular carpenter’s level or torpedo level before drilling the hole. Cordless drill with bubble level.

How do you make a straight line on a ceiling?

Hold the framing square against the ceiling at the point where the 4 lines intersect. If the lines meet at a 90-degree angle, measure each straight line with your measuring tape.



Measuring Straight Lines On Your Ceiling

  1. Two stepladders.
  2. Measuring tape.
  3. Hammer.
  4. Nail.
  5. Pencil.
  6. Framing square.
  7. Chalk or laser chalk-line.


How do you level a ceiling with string?

Quote from the video:
Quote from Youtube video: Used is to use a line level some Mason line you can get a little drop level that hooks right on here they're using about two inches wide you string it across the wall.

How do you distribute light evenly?



In new construction or a major remodeling, consider installing a window or skylight in hallways, baths, and foyers. In larger rooms, windows on more than one wall will give balanced light distribution throughout the room, help reduce direct glare, and provide cross ventilation.

How do you fix a hole in a ceiling light fixture?

How to Fix Hole in Ceiling from Light Fixture? [Full Guide]

  1. Step 1: Acquire the Tools and Take Safety Precautions.
  2. Step 2: Clean the Exposed Surface Area if You Spot Rubble.
  3. Step 3: Place the Drywall patch in the Hole.
  4. Step 4: Apply a Thin Layer of Joint Compound Over the Drywall.


How do you cover a hole in a light fixture?



Permanent Covering



If you are not going to replace your old light fixture, cover the hole with a piece of drywall for a permanent fix. Use the same thickness of drywall as the surrounding ceiling, and cut the patch piece as close to the size of the hole as possible.

Is it OK to swag a chandelier?

The trick to swagging your chandelier is choosing a light fixture that hangs from a cord or chain, *not* from a fixed stem. It’s also essential to make sure you securely anchor the hook or other swag system into your ceiling to carry the weight of the fixture.

Is chandelier out of style?

Chandeliers are not out of style, and they probably will never be out of style. While different types of chandeliers may follow current trends, others are timeless. Before putting a chandelier in a home, consider various designs and sizes as well as prices of chandeliers to fit a room.

Should chandelier be centered over table?

A chandelier or other low-hanging fixtures should be centered over the dining table, not centered in the middle of the room. For example, if you have other furniture in the room, your table may not be exactly in the center of the space – and that’s okay.

How do you swag a chandelier without a chain?



– Swagging a Pendant Light Without a Chain –

  1. Mark on your line where you want the loop to go.
  2. Run the area where you want the loop over the thimble (the u-shaped device that makes the curve).
  3. Attach the clamp right below the thimble, and hand tighten it. …
  4. Hang your light.
  5. Voila!


How do you swag a hanging light fixture?

Swag your light fixture from the ceiling junction box over to the ceiling mount. Place the cord on the ceiling mount hook and adjust the fixture to the desired length. Secure the screw against the cord to hold the cord in place. Screw your light bulb in the fixture and you’re all set.

How do you put a swag hook on a chandelier?

Press the swag against the ceiling to ensure that the wings have popped open. Twist the swag hook clockwise while gently pulling downward. Twist the swag until the flange or base is firmly pressed against the ceiling. Repeat for as many swags as needed.

How do you make a pendant light swag?



To convert a pendant lamp to a swag lamp, you will have to remove the light fixture from its original location, determine the new swag location and finally, lengthen the chain and lamp cord. The first step is to loosen the canopy nut and drop the pendant light or chandelier’s canopy to reveal the electrical wiring.

How do you hang a swag light from the ceiling?

How to Hang a Swag Lamp

  1. Determine placement of lamp. …
  2. Drill starter hole into stud with electric drill.
  3. Screw the swag hook into the starter hole until completely inserted.
  4. Hang lamp onto hook by the decorative chain. …
  5. Install a second hook near corner of ceiling above the wall outlet where the lamp will be plugged in.