How do you support a long closet rod?

Youtube quote:So now I've got to use my skill saw and make the final cut got the hole drilled through here and I'm going to take these rods off and pass them right through. Here.

How do you hang a closet rod on a concrete wall?

  1. Step 1: Measure Where to Hang the Brackets. …
  2. Step 2: Mark Holes for Hanging the Curtain Bracket. …
  3. Step 3: Check for Correct Masonry Bit Size. …
  4. Step 4: Drill the Screw Holes. …
  5. Step 5: Secure Screws in the Anchors. …
  6. Step 6: Drill in the Screws. …
  7. Step 7: Attach the Rod to the Brackets and Hang the Curtains.
  8. How do you secure a closet rod?





    Attach closet rod support brackets at various points along the closet rod. Use a stud finder to locate the studs in either the wall or ceiling. Drill pilot holes, using a drill and drill bit. Alternatively, use self-tapping wood screws and mount the bracket directly into the stud.

    How do you support a wood closet rod?

    Youtube quote:Mount. The shelf to the support using the shelf mounting screws provided to mount the rod against the wall use Trilok to anchors and screws into drywall with the fixed rod flange.

    How do you reinforce a closet bracket?

    Youtube quote:It's one of those plastic ones that you run it screw through so apparently that's one step up from the ones that you just hammer in but a little cheap plastic pieces.

    How do I fix a collapsed closet rod?

    Youtube quote:Piece of PVC tee pipe along here and then I will put PVC down to the floor here just to give it some structural support it's not gonna look that great. But it's gonna do the trick.

    How do you hang a curtain rod on concrete?





    Youtube quote:Put it onto our block and go ahead and mark the holes. After you have the holes marked go ahead and grab your drill. Put it right on to that mark then we're going to go ahead and drill out the holes.

    How do you hang something heavy on a concrete wall?

    Shelving brackets and hooks that are constructed of strong steel mean little if the anchor which fastens them to the concrete wall is too weak to bear the weight. Installing strike anchors that expand inside the concrete is one of the best ways to secure heavy things on concrete walls.

    How do you hang something on concrete?

    Youtube quote:It's a hammer drill. It's got two settings you can see one says drill that other set in there is for the hammer drill setting. It works just like a drill.

    How much support does a closet rod need?

    You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

    How do you secure a closet rod without studs?



    Youtube quote:We now need to drill a hole so our screw can easily go through the stringer and hit the drywall anchor. So I'm going to drill a hole that is bigger than the screw.

    How do you fasten a rod to pole sockets?

    Youtube quote:Then I'll pivot the hole in the rod to where it is on the bottom and lined up with the hole in the bracket. Next I'll install a screw provided clockwise with a Philips screwdriver.

    How far should a closet rod be from the wall?

    Opt for a closet rod depth of at least 12 inches.



    You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.

    Can you use a tension rod in a closet?



    Tension rods can be used for more than just holding up curtains, though that is what most people think to use them for. They can also be used for clothes. They can hold things that are supposed to be air-dried, they can hold freshly ironed clothes so they don’t get wrinkled, they can even hold clothing in closets.

    How high do you hang a closet rod?

    Standard rod height for a single closet rod is 60 inches, a height that leaves ample hanging space for floor-length dresses. When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods.

    Can a closet be 20 inches deep?

    The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.