What do you do with area under a deck?

He has eight ideas to fill in the wasted space below the main attraction and turn it into a space the whole family can use.

  1. 1) Add Lattice as a Deck Option. …
  2. 2) Skirting. …
  3. 3) Build a Shed Under the Deck. …
  4. 4) Build a Patio Under Your Deck. …
  5. 5) Add a Patio Swing. …
  6. 6) Cover the Ground in Weed Blocker Fabric and Gravel.

What is the underneath of a deck called?





Fascia: Boards that cover the ends of the deck boards and the perimeter joists for decorative purposes. Footing: Any concrete base embedded in the ground in order to provide the main support for the deck. Guardrail: A lower, horizontal board that runs across the railing posts.

What is the area under a porch called?

The area under the front porch (or mud room) is referred to as a Porch Skirt or Porch Apron. The porch fascia board or skirt board directly under the porch floor, transitions the porch to the porch skirt. The porch skirt, like the foundation, visually anchors the house to the ground.

What do you put around base of a deck?

Start by picking out a few larger shrubs or even small trees you’d like to include. Then choose smaller perennials and ornamental grasses to fill in around them. Make sure that the plants you choose will grow in your Hardiness Zone and the amount of sunlight your yard gets.

How much space do you need under decking?

How to Ensure Proper Deck Ventilation. As mentioned earlier, it is recommended to have a minimum open space of 18 inches under the joists as it will allow the air to pass unaltered and unhindered under the deck.

How do I hide under my deck?





Material Options for Hiding the Area Under Your Deck

  1. Lattice.
  2. Fence boards.
  3. Vinyl siding.
  4. Composite fascia boards.
  5. Stone faux.


What is a deck footing?

Footings are a very important component of deck construction because they provide the solid foundation that will support your deck. Your deck’s design will determine how live and dead loads are transferred from different sections of the deck to concentrated points of contact with the ground.

What is a RIM board on a deck?

Rim joists are the perimeter joists of a deck. The two outside parallel joists, plus those that run perpendicular to all the joists, form the rim of the deck or a band that ties the structure together. Hence, they are known collectively as band boards and rim boards.

What is a substructure for a deck?



A deck’s substructure provides the framework that holds up the deck. It includes everything beneath the floorboards and railings that keeps a deck strong and safe.

How do you landscape around a deck?

Plant some low growing foliage and flowers, leaving plenty of void space between them. This creates the illusion of a sprawling, open area! You can use larger potted plants to trick the eye into thinking that the deck itself is bigger. All you need to do is place them near the edges and voila!

What is a floating deck?

A floating deck is a deck that isn’t attached to a building and they “float” above the ground. Generally, floating decks are low to the ground and don’t require handrails or even staircases. They are sometimes called “grade-level” or “freestanding” decks because they’re built just above the ground level, or grade.

What do you put around edge of decking?



Use a combination of low level planting beds, reflective water pools and sections of smooth stones to create a contemporary look that will really help your deck stand out. You can also use a variety of white, gray and black stones to get a contrasting effect for your deck.

Can I use decking boards for edging?

You can use composite decking as your garden edging. Composite decking garden edging is the best choice for gardeners who want a long-lasting garden edge. The composite edging acts as a barrier for your lawn, and it is so strong that it can last for several decades.

Is decking slippery when wet?

It’s time to dispel this myth – wood decking won’t become slippery when wet unless mould, algae or moss is present on the surface. The good news is that it’s easy to prevent wood decking from becoming slippery, and it’s easily fixable if it does.

How do you finish wooden deck edges?

Youtube quote:So as you can see here I offset the board by that whip. And then screwed in the board on top at both ends. And then in the middle you could also probably use clamps if you have the option.

Should I seal the underside of my deck?



It is not necessary to stain the underside of your deck for protection from the elements, especially if you use pressure-treated wood, which helps keep wood-boring insects out.

Do you have to stain underneath a deck?

Remember the stain’s main purpose is to protect the wood from the harmful effects of direct sunlight. The underside of decks, by its very nature, never sees direct sunlight, so stain under a deck is not necessary.

Should you oil the underside of a deck?

Any cuts made during installation need to be oiled while fixing. Decks that will not be accessible from underneath after completion should be coated with a minimum two coats of penetrating oil prior to installation. All other decks can be oiled with a second coat after installation.

Should deck boards be stained on all sides?

In summing up, it is not necessary to stain all 4 sides of deck boards. But you definitely want to stain all the exposed wood like the top and sides of each board to reduce weather damage.

Should you paint the underside of decking boards?



The underside is important because the water on your deck will dry on the top and run and hang onto the bottom. Expect to have to repaint the bottom faster than the top. But again with maintenance this is an easy job.