How far should tub drain be from wall?

Bathtub Drain Measurements

The drain hole should be a minimum of 12 inches away from the wall and 9 inches in scope. To rough in the drain, use a 1.5-inch pipe.

What is the rough in for a tub drain?

Plumbing Rough-In

You’ll rough in the tub drain with 1 1/2-inch pipe with male threads that extend 1/2-inch above the level of the floor. The drain will also require a P-trap and must be vented; specific requirements for the trap, drain line and vent will vary by local building codes.

How far should a shower drain be from the wall?

Rough-In Dimension Terminology

Toilet Shower/Tub
Discharge/Drain Hole from Back Wall 12 1/2″ 14″
Discharge/Drain Hole (Vertical) 0″ 0″
Fixture (Side to Side Buffer) 15″ to 18″ min 18″ min
Fixture (Front Buffer) 21″ min 18″ min

Can you put a bath tub in a basement?

Installing Bathtubs or Showers

Installing a tub or shower in your basement carries many of the same concerns as installing a toilet. You may need to break up the floor and excavate to install the plumbing. If plumbing stubs are available, you can install a shower as you would in any other room.

How do you install a bathtub drain in a concrete slab?

Quote from the video:
Quote from Youtube video: The first step is to dry fit your bathtub without connecting into any pipes and ensure that it sits level. Okay so we're gonna be installing a Kohler tub. And a concrete subfloor.

How much drop does a tub drain need?

¼ inch per foot

Improper drain slope

But do you know the proper slope? The ideal slope of any drain line is ¼ inch per foot of pipe. In other words, for every foot the pipe travels horizontally, it should be dropping ¼ inch vertically.

Are tub drains standard?

The drains for sinks can vary slightly, but the most common measurement for those is 1.25 inches. You might also find sinks with a drain diameter of 1.625 inches. Thanks to the standardization, any bathtub drain can fit any standard bathtub between 14 and 26 inches in depth.

When installing a drain line how many inches should the drain line be installed off the floor?

Before installing a new sink in your bathroom vanity, mark off the water and drain lines according to industry standards. The water supply line runs out of the wall into a hole in the back of the vanity, typically placed at a height of 22 to 24 inches from the finish floor.

Where is my tub drain located?

The easiest way to figure out which kind of tub you’ll need is to stand in front of your shower as if you are going to go into it. If the drain is to your right you have a right handed tub, and if the drain is on your left you have a left handed tub.

Does a basement bathroom add value?

Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.

How do you rough in a bathroom in a basement?

Quote from the video:
Quote from Youtube video: And I know a lot of you guys wonder how to rough in a bar in the bathroom. So we're just going to go over here I'll explain to you how we're laying out the drain lines.

Is it worth putting a bathroom in the basement?

Adding a bathroom to your basement makes it livable space, which increases the overall market value of your home. A bathroom in your basement can also be a huge selling point for buyers if you are ever looking to sell. When a basement is unfinished with no bathroom, buyers look at the basement as wasted space.

Can you add a bathroom to a basement without a rough-in?

Are you adding a basement bathroom to a new house or an old house? Usually, older homes won’t come with a rough-in. If your basement isn’t set up to include the necessary systems like drains and plumbing vents, you will need to have them added.

How do you put a bathroom in a basement without breaking concrete?

You can tie a bathroom tub or shower into an upflush toilet system, which eliminates the need to break into the concrete floor. The system sends the wastewater from the shower drain and toilet to a holding tank before being pumped to the main sewer line.

How much does it cost to add a bathroom in a basement?

Adding a bathroom in a basement costs $8,000 to $15,000 on average. You’ll save $500 to $1,000 if you have a rough-in drain already in place – typical in newer homes and usually near the main drain line.

What is rough-in plumbing in basement?

A plumbing rough-in means that all water supply and drain pipes have been run through bored holes in the studs and other framing members and that all pipe connections have been made. No sinks, faucets, or other fixtures and end elements have yet been installed at this phase.

Can I put a shower in my basement?

In a home where the main drain is above the basement floor level or in a basement with no basement drain provisions, you can still add a shower without breaking any concrete. The answer is installing an up-flush drainage system. Such a setup pumps the water from the shower into your home’s main drain.

How much does it cost to put a half bath in a basement?

A half bath installed in the basement provides a more conveniently located bathroom out of the usual foot traffic. Also, the average cost to add a basement is around $10-15,000. However, if you add the basement under an existing bathroom, you can save anywhere between $1-2,000 in plumbing expenses.

What are powder rooms?

The Powder Room

A powder room is also known as a half bath or guest bath. It only has two of the four main components that a bathroom should have, typically a toilet and a sink.

How much space do you need for a half bath?

Half Bath Dimensions

A half bath needn’t be large. You will have enough space if you can find a spot in your house that’s about 3 to 4 feet wide and 6 to 8 feet long. If it’s any smaller, it will be uncomfortable for people to access.