Can I use furring strips for framing?

You can use furring vs. framing for various projects. For instance, if you want to cover a brick fireplace wall, you would first prep the wall with either furring strips or stud wall framing. Home Depot says that thin furring strips create a level surface for attaching wallboard and paneling.

Are furring strips structural?

Furring strips used for supportive structure

Furring strips are used to provide carpenters a level and supportive structure when they’re applying the finish. Whether it’s the ceiling or the walls, furring strips are essential to ensuring that you’ll always get a flat and smooth surface when the project is complete.

How do you attach furring strips to a basement wall?

Quote from the video:
Quote from Youtube video: The actual concrete fastener. I'm using a 3/16. By 2 and 3/4 inch long concrete fastener from tap comm. This is basically just a screw anchor designed to go into concrete walls.

What is furring for framing?

In construction, furring (furring strips) are thin strips of wood or other material to level or raise surfaces of another material to prevent dampness, to make space for insulation, or to level and resurface ceilings or walls. Furring refers to the process of installing the strips and to the strips themselves.

Can you glue furring strips to basement walls?

When you’re finishing a basement, it’s common to attach drywall to the bare basement wall structure using wood called furring strips. Applying these strips to the masonry or poured concrete rough wall allows you to secure the drywall in place.

What is the difference between furring strip and common board?

What is this? Furring strips are usually even less expensive than common boards. However, they are mainly used for construction, so they aren’t meant to be seen. This often results in the pieces of lumber often looking rough with imperfections, warps, or knots.

What are 2×2 furring strips used for?

This furring strip has a wide array of uses, which include standard carpentry applications for furring out walls & ceilings, or other non-structural applications. Also ideal for hobbies, shelving, creating air space for insulation, leveling and resurfacing walls & ceilings for wallboard, paneling, etc.

How much weight can furring strips hold?

Even though it might support enough static weight, that depends on HOW the ladder is designed, what joinery you use, and the environment. It is NOT a simple matter of joining sticks together. Furring strips may support 50 lbs now, but this is NOT the right type of lumber for supporting live loads.

What is the purpose of furring strips?

Furring, Furring Strips. Furring or the use of furring strips (sometimes misspelled “firring”) is the use of narrow strips of wood usually attached to a wall, ceiling or floor. Their job is to create a true plane on which to attach or strap flat surface materials.

How thick should furring strips be?

Strip is used to give a level surface for attaching wallboard, paneling, etc. Common: 1 in. x 2 in. x 8 ft.; Actual: 0.656 in.

What screws to use for furring strips?

Use 2 – 1 ¾” course thread multipurpose screws into each truss to secure the furring strips. Using 2 screws at each truss will help keep the furring form cupping. Use 1 ¼” course thread screws to secure the drywall. Use screws at 6”- 8” on center at the butt joints and 12” minimum in the field.

How far apart should furring strips be for drywall?

If drywall is to be installed on the ceiling, place the furring strips every 16 inches on center. When laying out the furring strip plan, remember that the strips will run perpendicular to the joists.

Should furring strips be vertical or horizontal?


Run the furring strips vertically — the best option. If the furring strips must go on horizontally, find some way to create a 3/8-inch air space between the furring strips and the rigid foam. Use Cor-a-Vent horizontally to facilitate air and moisture movement behind the siding.

Can drywall be attached to furring strips?

Once the furring strips are in place, you can install the drywall the same way you would on any stud wall. For a standard 8-foot high wall, start by installing a sheet of drywall horizontally at the top edge of the wall, using drywall screws inserted every 8 inches into the furring strips.

How many furring strips do I need for a ceiling?

Install as many furring strips as necessary to cover the chalk line. For example, if your chalk line is 12 feet long, you will install one whole eight-foot furring strip, butting it against one wall, and then measure and cut four feet from another strip and attach it over the remaining space.

Do I need furring strips for basement ceiling?

If you’re hanging drywall on new ceiling joists, you probably won’t need furring strips. Standard drywall panels attach directly to the joists with drywall screws. If the ceiling is old, however, and you don’t want to remove the existing ceiling finish, furring strips can provide a solid base.

Should you nail or screw furring strips?

If you HAVE to run furring strips rather than building a wall, definitely go with mechanical fasteners (i.e tapcon screws — avoid concrete nails). Construction adhesive is not made for a “structural application” such as bonding 2×4’s to a concrete wall.