How much should it cost to install a vanity?

Bathroom Vanity Installation Costs

Installing a new bathroom vanity costs $300 to $3,800, about $1,500 on average. The individual units come in two styles: premade vanities for $100 to $2,600 or custom build at $500 to $2,800. Installation runs from $200 to $1,000 per vanity.

Is it hard to install a bathroom vanity?

Installing a new vanity is easiest with a unit that includes a countertop with an integrated sink. The vanity cabinet is separate from the top. The cabinet has an open top and back, so it’s easy to set in place and fasten from above.

Can you install your own bathroom vanity?

A new bathroom vanity is a simple and affordable way to transform your bathroom. We’ll be removing an existing vanity and replacing it with a new one. This is a home improvement project you can tackle with some planning and a few steps.

How do you secure a bathroom vanity to the wall?

Quote from the video:
Four holes not in line with studs you have to use wall anchors. Use a type that's made for your wall surface tile plaster or drywall.

How long does it take to install a vanity?

A new vanity can change the entire look and feel of a bathroom. It can also add much-needed storage. With a little planning, installing one is something you can do on your own in about 6 to 8 hours.

How much does it cost to install bathroom sink?

According to, the average cost for replacing a sink runs from $470 to $700, including materials and labor. The Home Depot, for example, charges $200 to $350 to install a sink, though that doesn’t include the cost of the sink, faucet or any related plumbing work that might need to be done.

Do you have to attach a vanity to the wall?

Are Bathroom Vanities Always Installed Against A Wall? In most cases, the bathroom vanity is installed against a wall. Because it is necessary to have plumbing to provide water to your sink and drainage for the used water, housing it against the wall allows for ease of installation.

How much space should be between vanity and wall?

NKBA designers recommend a 30″ clearance between the front edge of a fixture, such as a vanity or toilet, and any other fixture or wall. The building code allows for a minimum of 21″. The bathroom lavatory, or sink, should be placed far enough from a wall or shower wall that it’s comfortable to use and easy to clean.

How do you plumb a sink vanity?

Quote from the video:
Use a chop saw or a handsaw. To make your cuts wash the debris off the piece that was cut to make sure you don't have any contamination. In the drain. Next.

What do you use to attach a vanity to the wall?

Attach the vanity to the wall using 3-inch drywall screws. If the holes are not completely lining up, or you want a more secure install, use wall anchors to attach the vanity to the wall. Check the level again before trimming the shims with a utility knife.

How do you hide shims under vanity?

Hiding Shims on a Bathroom Vanity With a Sink

Insert the wood shim underneath the shorter two legs until the vanity is even using a level to make sure it’s perfect. Mark the spot on the shim where it sticks out from the vanity toe kick using a pencil.

How do you install a freestanding vanity?

Quote from the video:
Space ok now we're going to dry fit the vanity top and sink onto the cabinet to make sure the drain pipes will line up with the existing plumbing lines coming from the wall.

Does a freestanding vanity need to be attached to the wall?

“Free-Standing” Bathroom Vanity is Misleading

This type of bath vanity does rest on the floor and can generally stand on its own, but you must still anchor these vanities to the wall. Because they rest on the floor, free-standing vanities do support most of their own weight, unlike wall-mounted or floating vanities.

How do you attach a vanity to a floor?

Quote from the video:
The top of the unit with a cloth to remove any dirt. Then apply a line of silicon sealant all the way around the top of the unit. You can now carefully lower the base.

Does baseboard go behind vanity?

You can install a bath vanity against baseboard by scribing it. This allows the vanity to fit tightly against the wall, and you won’t have to remove or modify the baseboard. Scribing means trimming a small portion of the vanity off to custom fit it to the wall over the baseboard.

How do you notch a baseboard for a vanity?

Quote from the video:
So again coping the base to the leg and essentially just following the profile leg of the bottom of the base of the cabinet. And cutting the base out to match that profile.

How do you cut a bathroom vanity?

Quote from the video:
Next I cut the extra wood off the white side of the board. Then I kept the molding pieces away from the sinner. And cut them to length overall the pieces are about 7/8 of an inch by 3/4 of an inch.