Can you hang gutters without fascia?
Unless a roof overhangs a home 3-4 feet and there is no basement, a gutter system is needed. A house without a fascia (the piece of wood below the last shingle) has to have gutters installed using roof straps. The roof straps attach to the hidden hanger inside the gutter and secure right into the roof.
Can you install gutters without drip edge?
If the home has no gutter, the drip edge will prevent the water from running down the fascia and onto or into the soffit cavity. However, without the drip edge, the water sticks to shingles, potentially working its way under the shingles to cause a leak.
How do you install gutters on a flat roof?
Quote from the video:
Quote from Youtube video: For most flat roofs the mesh may need to be bent up so it will fit make sure to watch the video on how to bend the mesh. Then put screws along the top to hold the gutter guard to the roof.
Are gutter wedges necessary?
A gutter wedge allows you to attach gutters to the house when the fascia boards are pitched or slanted and when your fascia has a 1×2 trim just beneath the shingles. Utilizing gutter wedges in these instances is necessary to prevent sagging and increase the stability of your gutter system.
Is a drip edge necessary on a roof?
Without a drip edge, water may end up beneath the shingles and may cause damage to various parts of the home. Though your home may not have originally had a drip edge installed, drip edges are now required by most building codes across North America to protect homes from damage.
Can you add drip edge to existing roof?
Make sure the outer edge extends over the gutter. If it doesn’t, pull the drip edge out slightly from under the shingles. Secure the drip edge with roofing cement. Apply a continuous bead of cement along the top of the drip edge, then press down on the shingle.
What angle should gutters be hung?
A good rule of thumb for a gutter slope is that you want at least a quarter inch of slope for every 10 feet of gutters.
What should the fall on guttering be?
A general rule is that gutters need to slope at least a quarter of an inch per 10 feet to avoid standing water. Ask your guttering professional for the right amount of slope for efficient water flow.
Are vinyl gutters better than aluminum?
Aluminum is far more durable than vinyl, however. A potential problem with installing aluminum gutters is that they’re easily dented, so they’re not the best choice for areas that frequently experience hailstorms and other extreme weather events.
What is the difference between drip edge and gutter apron?
The most obvious attribute that distinguishes a gutter apron from a drip edge is the fact that a gutter apron is more of an L-shaped metal rather than a T. A gutter apron also comes in metal strips with aluminum and steel sheets. Like drip edge, a gutter apron may be available in many different colors.
Does drip edge go under tar paper?
Does Drip Edge Go Over or Under Felt? According to most building codes and manufacturer recommendations, the drip edge should be installed beneath the underlayment along the eaves of the roof.
What is the difference between drip edge and rake edge?
So, the drip edge attracts the rain droplets, snow, all types of precipitation into the eavestroughs, and away from the rest of the roof. Rake edges, on the other hand, are placed along the ends of the gables of a house’s roof.
Does drip edge go on rakes and eaves?
A drip edge should be installed on the eaves and rakes of the roof, flush with the decking and fascia. On eaves, the drip edge is installed directly to the deck with underlayment installed over it for proper water shedding. On rakes, the underlayment is installed over the drip edge.
Should drip edge be tight to fascia?
A vertical drip edge lip extends down roughly 1 5/8″ and as Steve points out, should not be set tight against the fascia board or water may run behind the gutter and down the fascia, inviting leaks and rot.
How far should shingles overhang drip edge?
¼ to ¾-inch
Asphalt shingles should overhang the exterior edge of the drip edge by ¼ to ¾-inch. Check local building code for drip edge requirements prior to the start of your roofing project.
Should shingles overhang gutters?
Most shingle manufacturers recommend a 1/4 to 3/8 inch overhang over your eave, which is where your roof ends by your gutter. In many cases, and particularly as the home ages and settles, the roof edge at the eave edge can wave in and out by more than this amount.
What is a rake edge?
Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.