The only way to do what you want to do is cut the concrete with a gear driven saw and masonry blade, then jack hammer out the rest of the concrete. It really is not that difficult and you can rent all the equipment and do it in a day easy.
How do you break up a concrete driveway?
Quote from Youtube video: Possible so that I can pick it up with my Forks. And just load it into other dump trailer or a dump truck.
How do you break up a concrete patio?
“Most concrete patios are un-reinforced, meaning that there is no rebar. So, in that case, a jackhammer is the best method to break the concrete into smaller pieces that can be shoveled away. If the area is very small, and the concrete is already cracked, a sledgehammer could also get the job done.”
What tool do I need to break up concrete?
jackhammer
A jackhammer is an ideal power tool used for concrete demolitions, and four subcategories of jackhammers exist, including rotary, demolition, combination and breaker options.
How do you break concrete without a jackhammer?
Instructions
- Dig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax or mattock. …
- Strike the Concrete. Lightly sprinkle the concrete with water to minimize dust. …
- Pry Off Stubborn Pieces. …
- Move the Concrete Chunks With a Hand Truck.
What is the easiest way to break up concrete?
Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less. Dig at the base of the slab to find the bottom.
Tool #1: Sledgehammer + Pry Bar
- Recruit a buddy to lift a corner with a pry bar. …
- Pry and pull out the broken chunks as they break apart.
- Don’t hit the same spot twice.
How do you remove part of a concrete slab?
Steps for Removing a Concrete Slab
- Step 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you’re working on. …
- Step 2: It’s Hammer Time. …
- Step 3: Pull Apart and Remove the Broken Concrete. …
- Step 4: Repeat Steps Until Concrete Is Demolished.
How do you cut a concrete slab by hand?
If your cut doesn’t need to be exact, use a cold chisel and hand sledge to cut the concrete. Score the length of the cut three or four times with the chisel. A circular saw with a masonry blade can also be used to either score or completely cut through the block.
Can you use a hammer drill to break up concrete?
Hammer drills do not have a chiseling function and can be used to drill into a variety of materials. Rotary hammers use an electro-pneumatic hammer piston to generate high impact energy, which allows it to drill or demolish concrete.
How do you soften concrete?
Quote from the video:
Quote from Youtube video: Away. Just that simple concrete and mortar dissolver from super Co specialty products the acid alternative for cleaning concrete.
What size sledgehammer breaks concrete?
If you need a sledgehammer for small projects around the home, a three-pound hammer might be a good choice. However, if you’re knocking down a wall or breaking up concrete, you may need a 10-pound model.
Can I use a maul to break concrete?
Mauls should never be used to strike concrete, metal or equally hard materials. Use a wood splitting maul or an axe to make a starting notch. Insert the wedge into the notch and strike with the striking face of the wedge or a sledge hammer with a larger striking face than the struck face of the wedge.
How do you chisel concrete?
Quote from the video:
Quote from Youtube video: Hold its handle with the blade facing down. And pick up the hammer with your free hand grasp both instruments firmly. Position the chisel at a close angle with the surface of the wall.
How do you use a jackhammer on concrete?
Quote from the video:
Quote from Youtube video: So what i do is i go in a straight line to break up the slab so you're gonna see me go right across the front of the slab in a straight line.
Is a jackhammer difficult to use?
While they are amazingly useful, they’re also somewhat difficult to use. Using a jackhammer is not for the faint of heart. It isn’t something that you’ll be able to get and learn how to use immediately. Many areas require jackhammer operators to undergo training and certification before they’re allowed to use one.
Can you use a jackhammer upwards?
Typically rocking the jackhammer itself side to side, or up and down, will release the bit. In some cases you can remove the jackhammer from the bit, the then tap the bit side to side using a mallet.
