Best way to temporarily relocate a radiator?

  1. Remove the valves, extend the pipework along the wall, and install radiator + valves in new location.
  2. Extend the pipework after the valves, so the extension effectively is part of the radiator.

Can you move the location of a radiator?

It is entirely possible to move your designer radiator into a whole new position in the room so that it gets the prominence it deserves without getting in the way of the rest of your DIY and décor plans.

How easy is it to reposition a radiator?





Moving your radiator to a new position is a fairly straightforward job providing you have some basic knowledge of plumbing beforehand. Unless you feel that you are fully competent to do so and that you have the required plumbing knowledge needed to move a radiator, it’s always best to leave it to the professionals.

How do you reroute a radiator?

Youtube quote:How we're going to fit them pipes to this new radiator. I hope you enjoy this video and that you wish us luck thank you so if we look closely at the floorboards.

How do I move a radiator a few inches?

Electric radiators are easier to move if they are plugged into the wall. It is quite simple to unplug it and switch it to a new location, providing it is not near something that will catch fire easily. If it is hardwired into the wall, it is advised to contact heating engineers.

How do I move a radiator without draining the system?

How to remove a radiator without draining the system

  1. Close the radiator valves. Shut down the lockshield and the TRV, which are on the opposite sides of the radiator. …
  2. Drain the radiator. …
  3. Pull the valve off. …
  4. Remove the radiator from its brackets. …
  5. Tilt the side of the radiator. …
  6. Refit the radiator after painting.





Do radiators have to be under Windows?

While you no longer need to fit your radiator under the window, there is some logic in doing so. Historically, radiators were fitted in the coldest part of the room – the exterior wall – where cold air would enter and drop to the floor.

How hard is it to relocate a radiator?

Moving a radiator takes around 1-4 hours, depending on the complexity of the job and the amount of extra pipework required.

Do I need a plumber to move a radiator?

Whatever your reasons, you will need to begin by checking that your pipework runs next to the wall you want to move the radiator to. If it doesn’t then you will need to call in a qualified plumber to add new pipes to run to the area your new radiator will be positioned.

Can you use flexible hoses on radiators?



Flexible hoses are available for use on central heating radiators. Smiths supply them for use with their Space Saver kick space heaters.

Do you bleed a radiator when it is on or off?

Turn off your heating. You can’t bleed a radiator when the heating is on, as it may be too hot to touch. You could also get hot water spraying out of the radiator. Use your radiator key to turn the valve at the top of the radiator.

Does foil behind radiators work?

Putting kitchen foil behind the radiator is a false economy, as its effectiveness will be severely limited by these effects over time. Homemade foil radiator reflectors crinkle easily and oxidise, losing their reflective qualities.

What happens if you bleed a radiator with the heating on?



Should I be bleeding radiators hot or cold? Always make sure your central heating system (your boiler) is turned off and your radiators are cold before attempting to bleed them. When turned on, your radiators contain hot water, and you could be at risk of scalding yourself if you bleed them at this time.