Non-GFCI outlets are a safety hazard when they are installed in garages, so it is definitely better for them not to allow them in garages, but it does cause quite a bit of inconvenience when it comes to plugging in a refrigerator!
Does a freezer require a GFCI?
So freezers and refrigerators should never be plugged into GFCI’s. The consequence of a tripped GFCI is just what you experienced – melted and spoiled food.
Can you plug a refrigerator into a non GFCI outlet?
Refrigerators don’t need special outlets. They can be plugged into a standard 110-120 volt outlet so long as the socket is three-pronged.
Do freezers need a special outlet?
An upright or chest freezer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. A 115 Volt AC, 60 Hz, 15- or 20- amp, fused, grounded electrical supply is required.
Do I need a special outlet for a garage refrigerator?
You should have refrigerators and freezers installed on a 15-20 amp dedicated 120 volt circuit. This will avoid an electrical overload due to your current wiring not being capable of handling the additional power.
Do garage outlets need to be GFCI?
GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
Why does my fridge trips the garage GFCI outlet?
The most common reason your refrigerator keeps tripping the GFCI outlet is that it may be somehow getting shorted. Look for exposed wires that may be touching the ground or some water accumulation, causing a short circuit. If there is a shorting, then the GFCI trips save the device from getting damaged in any way.
Can you change a GFCI outlet to a regular outlet?
You can replace almost any electrical outlet with a GFCI outlet. Correctly wired GFCIs will also protect other outlets on the same circuit. While it’s common to find GFCI outlets in bathrooms and kitchens, there are GFCI outlet requirements.
Can I replace my garage GFCI with a regular outlet?
GFCI’s can wear out. If you’re willing to give up the protection then yes, you can switch back to a normal grounded outlet and the wiring should be basically the same.
Can you put 2 GFCI outlets on the same circuit?
All GFCIs trip at a current leakage as low as 4 to 5 milliamps. There is no additional safety gained from daisy-chaining two or more GFCIs together. If your home has multiple GFCI outlets on the same circuit, and you trip a downstream GFCI, the lead GFCI will also trip.
Can I add a GFCI outlet to an existing circuit?
You can meet this requirement simply by installing a new GFCI outlet. Note: The new circuit cable and GFCI receptacle must have the same amperage rating as the existing circuit. Use 12-gauge cable and a 20-amp receptacle for a 20-amp circuit; use 14-gauge cable and a 15-amp receptacle for a 15-amp circuit.
Can you install a GFCI outlet anywhere?
GFCI outlets should be installed in any potentially wet or damp areas such as kitchens, bathrooms, laundry rooms, outdoors, basements, garages and workshops.
How many GFCI outlets can be on a circuit?
The Standard Number Of GFCI’s On One Circuit
You may use two or more GFCI rated outlets on one circuit if you like. However, if one trips or goes bad, all the outlets/GFCIs down the line will be affected. That’s why you should test your GFCI’s monthly to ensure proper operation.
How do I add a receptacle to an existing circuit?
Answer: Absolutely you can. Using 12-3 wire (for a 20 amp circuit, or 14-3 wire for a 15 amp circuit) splice the new wire to both wires on the “hot” side of the outlet and to the white wire. You may need to cut 6″ pieces of wire to go from each wire nut to the outlet. Splice the ground to the existing ground as well.
How do I add an outlet to my garage?
Quote from Youtube video: And our ground our neutrals. And our grounds. Now we're going to shove the wires into the box and then we're going to mount our metal.
Can I add an outlet in the middle of a circuit?
Carpentry work will be required if the path of the new outlet wire needs to run through wall studs or between floor and baseboard areas. Once you have decided on the location and any carpentry work has been completed, the outlet can be added in the middle of the existing circuit run.
