Just a simple answer in case others have same question. You wouldn’t worry about hurting plumbing when breaking up a basement floor. First the plumbing should have a little protection around it – usually rocks. Second it is just really easy to replace anything that breaks.
How do you break a concrete basement floor?
Quote from Youtube video: The trick is this just use a shovel or a little gardening tool just like this and just dig up the dirt underneath the cement that you are about to crack.
How do you break up concrete in a pipe?
Ways to clear concrete from drains
- Flush. If the cement has accidentally (and recently) been put into a drain flushing it with plenty of water may be a simple but effective fix. …
- CCTV inspection and high-pressure jet blasting. …
- Mechanical tools. …
- Biodegradable, cement-softening products. …
- Acid.
Why is basement toilet on platform?
To prevent sewage backup into the main part of the house, toilets were installed in the basement. “Sewage backs up the pipe and into the fixtures that are connected to it,” Martin told TODAY.
Can you move a toilet in the basement?
If the basement is on a concrete slab, and the plumbing fixtures drain into floor drains, then there will be enough labor to relocate the drains. If you have a system that pumps your drain water up from the fixtures to above-foundation floor drains, there can be less labor.
How do you put a bathroom in a basement without breaking concrete?
You can tie a bathroom tub or shower into an upflush toilet system, which eliminates the need to break into the concrete floor. The system sends the wastewater from the shower drain and toilet to a holding tank before being pumped to the main sewer line.
What is the easiest way to break a concrete floor?
Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less. Dig at the base of the slab to find the bottom.
Tool #1: Sledgehammer + Pry Bar
- Recruit a buddy to lift a corner with a pry bar. …
- Pry and pull out the broken chunks as they break apart.
- Don’t hit the same spot twice.
How can I bust up concrete without a jackhammer?
Tools
- Shovel.
- Sledgehammer.
- Long Bar or Wrecking Bar.
- Bolt Cutters.
- Circular Saw.
- Metal-Cutting Saw Blade.
- Rotary Tool.
- Metal Cutoff Wheel.
Is it hard to break up concrete?
Breaking up concrete is highly strenuous work. Take frequent breaks and keep yourself well-hydrated. To break off large pieces, make a series of blows in a line to create a stress crack, then strike in the middle of the area you want to remove to break the concrete along the line.
What tool do I need to break up concrete?
You should use a crowbar or recking tool to prise up the slab and start breaking it from the corners, working your way to the centre. If, however, the sledgehammer is bouncing off the slab or you’re in discomfort, we recommend using a jackhammer (more on this later).
How do you move a bathroom in a basement?
Quote from the video:
Quote from Youtube video: So what I have to do now is moving the drain from the application here and have it running under the wall under the concrete and goes up from here. So it's going to be fed you know feed the sink.
Can a toilet rough in be moved?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
Is it expensive to move a toilet in a bathroom?
Cost of Moving Plumbing Fixtures
The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move.
How hard is it to move plumbing in a bathroom?
Relocating plumbing can be a time consuming and hard work. That’s why you should only do it if you have prepared beforehand and if you have confidence in the professionals you chose to do the job. But take comfort in the fact that once it’s done, you won’t have to think about it for a long time.
How easy is it to rearrange a bathroom?
“For us, moving plumbing around is an everyday job,” Steve Root says. “Changing a bathroom is easy if the layout isn’t changing, but even when it is, it’s relatively straightforward in most circumstances,” Angus Eitel agrees.
Where should a toilet be placed in a bathroom?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How far does shower need to be from toilet?
Both the residential building and plumbing codes have the same requirements: A minimum clearance in front of the toilet of at least 21 inches. This is required for all your bathroom fixtures, including the shower, vanity or sink and bathtub.
What is a toilet bidet?
A bidet is a specialized bathroom fixture for washing your undercarriage. It’s the primary way that many people around the world clean themselves up after using the toilet. Modern bidets spray a targeted stream of water exactly where you need it, cleaning up even your worst messes gently and easily.
