Wiring an outdoor light to a plug is acceptable as long as the plug is rated at 3AMPs, and the cable is recommendable for outdoor use. It isn’t something you can just throw a plug socket in, and work automatically. When you wire an outdoor light, you don’t just connect it to a plug socket.
Can I replace an outdoor light with a socket?
The process for replacing the socket is the same for an outdoor or indoor fixture, but it’s important to use the right socket for the fixture. Outdoor sockets are generally more robust than indoor sockets and often have special features that resist moisture.
Can you connect an outdoor light to a plug?
When you connect an outside light to a plug you don’t want wires running everywhere. Outdoor lights usually have underground wiring to keep the cables safe. This also hides them from view. Even when they come above ground, such as with the wiring for pendant lights, you can hide them pretty well.
How do I add an outlet to an outdoor light fixture?
Quote from the video:
Quote from Youtube video: And use a flush mount box. Or are you going to add a surface box to that light and then run some surface conduit over to a surface mount outlet. Box where a receptacle.
Can I spur an outside light from a socket?
If you are just spurring one single or one double socket off the ring there is no need for a fused spur/fcu. If taking the new light from the lighting circuit,which is the preffered option, there is no need for a fused spur/fcu. Just take a feed and neutral to the switch and then to the light.
How do I change the bulb in my outside lantern light?
Quote from the video:
Quote from Youtube video: Stop what you're doing which is what i'm doing stop and then you got to go inside and make sure that the power is off okay so it's good all good we're off. So as you can see it's off.
How do you replace an outdoor porch light?
Quote from the video:
Quote from Youtube video: Then you just twist them. Off. Now I've disconnected. So I can just pull my lights to stir it out. Now I'm going to install the new support. Bracket.
Can you put a plug on a hardwired light?
Got a lamp you love but no pre-wired light box in the wall or ceiling where you’d like to hang it? You don’t have to do a major wiring job. You can simply re-wire the lamp with an extension cord and plug it into an available wall outlet.
Can you wire a light off a socket?
You need the neutral to make the light work but you can take a spur from the socket underneath the desk for a light, you could place a FCU next to socket underneath desk then run cable to light switch and then on to light fitting .. you cannot run spur to spur with sockets incase of over load of cable but a light is …
Do I need an electrician to replace an outside light?
If your outdoor or security light stopped working and it’s time to get a new one, it’s vital to ask a Part P qualified electrician for help. Replacing these lights involve working with electricity, so to keep you and your family safe you need a professional who is certified and up to speed with national regulations.
Can you wire a ceiling light to a plug UK?
Yes, you can get a plug and attach the two wires from the cord to the non-earth (ground) pins of the plug.
Can you wire a light off a mains socket?
Yes, in either case your electrician will be able to overcome any problems.
Can I use a plug instead of a fused spur?
So as long as the plug sockets are accessible without touching the appliance to turn it off then this is fine, but also a fused spur is fine too.”
Can I change a fused switch to a socket?
Hi. There is no problem removing 13amp fused spurs and replacing with socket outlets. You just need to ensure that those circuits (fuses/mcb’s) are backed up by a 30ma RCD as they will now be used to supply mobile equipment rather than fixed.
How do you tell if a socket is a spur?
A general rule for a ring main is that if you only have two cables in the back of an existing socket then it is ok to spur. However, if you have a radial circuit with two cables coming in and out, this may be the last socket on that circuit and already has a spur.
When should you use a fused switch?
A Fused Spur Switch is commonly used for powerful electrical appliances, such as washing machines and dish washers that need to be installed without a plug; they are also used for electrical items that need to be installed on a separate cable from the ring main, for safety and maintenance purposes.
Can I install a fused spur myself?
As long as the job isn’t within a ‘special location’ such as a bathroom or outdoors, you’re also allowed to install additional new light fittings, switches, sockets and even add a single fused spur to an existing circuit (a ‘spur’ is a new cable and socket run as a branch from an existing socket on the ring main).
What appliances need a fused spur?
Fused spurs are commonly used as an alternative to a conventional socket, for the installation of powerful electrical appliances that can be installed without a plug, such as ovens, washing machines, electric heaters, dishwashers, fridges, and so on.
How do I replace a fused switch?
Quote from the video:
Quote from Youtube video: You'll need to get yourself a little flat screwdriver. Please put it in a slot and just pry it open gently. Once it's opened to poke the fuse out come out like.
How do I change a fuse in a plug?
Quote from the video:
Quote from Youtube video: It's as simple as popping your screwdriver in there pull the fuse out of the terminal like that. Now it's extremely important to remember to replace the fuse with the same amp rating.
Do plug sockets have fuses?
Head to the electric panel to check for a tripped breaker or a blown fuse, but only after you have unplugged all the devices from the dead socket. The electric panel is often found in the basement, garage, or laundry room. When you’ve located it, open the metal door to reveal the circuit breakers or fuses.
