Unless I’m missing something, you should be able to remove that nipple and get one that fits your extended spout. Many stores will custom make one. Depending on the additional length you need, you can add a coupling and a small nipple to the end of what you’ve got already.
How long should a tub spout nipple be?
If you have a FRONT-END threaded spout, measure from the wall to the end of the nipple to get the appropriate size. If you have a WALL-END threaded spout, your threaded nipple should be a maximum 1/2″ in length. If you have a TELESCOPING threaded spout, your nipple should be a maximum 1-3/8″ in length.
How do you install a tub spout extender?
Quote from the video:
Quote from Youtube video: To secure your tub spout extender. You're going to put the tub spout extender tight against the wall.
How do you fill gap between tub spout and wall?
Caulk It. If you’ve got a gap of 1/2 inch or less after you tighten the spout as far as it will go, the best way to erase it is to fill it with silicone caulk. Choose white caulk or one that matches the wall color, spread a thick enough bead to fill the gap, then tool it with your finger to give it a concave shape.
Do tub spouts come in different sizes?
Tub spouts come in all sizes. There is no one correct pipe length for a tub spout. Because spouts are different sizes and the plumbing behind the wall is installed at different depths, it’s necessary to measure and purchase or make a pipe when installing a new spout.
What happens if the tub spout is too long?
Quote from the video:
Quote from Youtube video: And in this video I'm going to show you how to shorten a tub spout. So that it fits right close up against the wall in your shower. So you can see here in this picture.
How far should tub spout stick out?
According to the installation manual for the spout, the nipple for the spout should be installed a min of 3/8″ to a max of 3/4″ past the finished wall. There is a pipe adapter that you screw onto the nipple. The spout slides over this adaptor and is set in place with a set screw located on the bottom.
How do you extend a shower valve stem?
Quote from the video:
Quote from Youtube video: So what it does is it fits in there like this then the screw goes in behind it which extends it out. Put second one in which I had just due to have it fit and then you screw that in.
How do you make a faucet extender?
Quote from the video:
Quote from Youtube video: All you need is an empty soap or lotion container. And it's really easy to do we're gonna start by cutting off the top of the container.
Are bathtub spouts universal?
There is no specific reason bathtub faucets are not universal besides the fact that different contractors install different types of bathtub spouts when building the bathroom. So, ultimately, it all depends on how your bathtub is built.
What is the standard tub spout length?
Available with or without diverter, in standard 5″ length or extra long 7″ length.
What is standard tub spout size?
Tub Spout in Polished Chrome.
Can you convert threaded tub spout to slip fit?
Quote from the video:
Quote from Youtube video: Well you don't want to do it with a sawzall. And have a rough end they have these small pocket pipe cutters and you just tighten it down spin it around and it will come right off.
How do you adjust a bathtub spout?
Quote from the video:
Quote from Youtube video: So what I need to do is make this piece a little bit longer here's how I'm going to do it I'm going to simply righty-tighty lefty-loosey three maybe four turns you can see that from this nut.
Can you cut a tub spout?
Start by sawing off the spout end just behind its opening. If that exposes the threads where the spout joins the nipple, cut diagonally across them with the hacksaw; try not to cut into the nipple. After severing the threads, twist off the spout.
17 мая 1998
What is a slip-on tub spout?
A slip-fit spout has an internal assembly that slips over a copper pipe. The spout has an opening on the bottom side where a setscrew is tightened to hold the spout onto the copper pipe. A slip-fit spout does not contain threads.
What is a non diverting tub spout?
1. Diverter or Non-Diverter. A diverter tub spout will have a lift rod that you pull up and push down on to divert the water between the showerhead and tub spout. A non-diverter tub spout will not have a lift rod (generally, used in a tub only or a three handle tub and shower configuration).
How do you install a non threaded tub spout?
Quote from the video:
Quote from Youtube video: Then wrap new pipe thread tape around the threads on the nipple. If the nipple extends less than three quarters of an inch from the wall you'll need a tub spout with threads. Here close to this end.
How do you install a Delta slip on a tub spout?
Quote from the video:
Quote from Youtube video: So all that's left and this was super easy to do is you just put that spout on and you turn it clockwise. Until it's nice and snug.
Are Delta tub spouts interchangeable?
A Delta Trim Kit cannot be used with a different brand’s Valve and a Delta Valve cannot be used with a different brand’s Trim Kit. You may not mix and match different manufacturers as the Valve and Trim Kit are specifically designed to only fit each other when made by the same company.
How do you replace a tub diverter spout?
Quote from the video:
Quote from Youtube video: So first we're going to just try to spin this guy off. And it's spinning pretty easy we've got a set screw under here. But it looks like this will probably just spin.
