Even if the fasteners don’t strip out of the steel studs, the studs can still flex, causing your shelf to sag. Steel studs are rubbish when it comes to hanging anything on them. I don’t think your installation will work unless you open up the wall and add bracing. You might be OK if the shelves are small.

Can you mount cabinets to metal studs?

In a kitchen, wood or plywood strips are often installed between the metal studs to give a strong nailing/screwing surface to attach the cabinets to. Some contractors install additional metal cross pieces between the studs instead of wood to allow for this additional screwing surface.

Can you attach shelves to metal studs?





Metal studs are lighter and sometimes less expensive than wood, and they are consistently straight. In conventional construction, hanging shelves on a wall requires finding the studs in the wall and mounting the shelf brackets to the studs with screws. Toggle bolts work better than screws with metal studs.

How do you hang cabinets on a metal stud wall?

Steps to Mounting Heavy Cabinets on Metal Studs

  1. Drill a hole half an inch wide to insert a toggle bolt. Please keep in mind that it is important to drill accurately, as many metal studs are quite small (approximately 1.25 inches wide).
  2. Insert the toggle bolt and attach a cabinet mount. …
  3. Attach your cabinet to the wall.


How much weight can you hang on metal studs?

The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.

What screws for hanging cabinets on metal studs?





You can screw cabinets to steel studs with no problem. There are special screws that have a short drill like tip on them to drill thru the stud. They are still sheetrock screws but you can use any self tapping screw that looks like the sheetrock screws.

How do you hang things on metal studs?

In order to hang items that need more support, it is possible to drill through metal studs. Titanium or cobalt drill bits are best suited for boring through metal. Once you’ve drilled your pilot holes, you’ll want to use a toggle bolt to safely secure heavy items to the metal stud.

Can you screw into metal studs?

Screws or nails are unlikely to penetrate metal studs unless you drill pilot holes first. If you want to hang anything heavy on the wall, then you will have to anchor it using the metal studs. Drilling a hole on the wall will make your work easier for hanging a mirror, a picture, or a television, for example.

How do you attach wood to metal studs?

Wood can also be fastened to the studs by pre-drilling holes into the metal studs and then installing them with wood screws. The power on the drill may need to be adjusted and turned up to get the screw into the stud. Depending on the type of drill, the speed may vary. Metal studs are very common in households.

How do you attach shelves to steel studs?




Quote from Youtube video: You want to now place the bracket the shelf bracket on the metal stud. And mark the holes which align to the metal stud.

Are metal studs as strong as wood?

Wooden studs are stronger than metal studs.



They can support a lot more weight, being made from heavier material themselves. Wooden studs can be used on load-bearing walls, new cabinets, doorways, and frames to stay sturdy and strong.

Will lag bolts hold in metal studs?

Lag bolts CANNOT hold weight when fastened through a metal stud. Unlike wood, metal studs do not catch the lag bolts teeth. Metal studs are hollow. The gauge of the metal studs used for internal walls is usually 25AWG.

How much weight can 2 studs hold?



A screw in a stud can hold between 80 and 100 pounds. Be sure to distribute the weight across as many as you can. The easiest way to increase the amount of weight a screw in a stud can hold is to simply double up.

How much weight can a shelf hold in studs?

For every stud your bracket is attached to, your floating shelf can hold 50lbs. That means if you’ve got a three foot shelf attached to two studs, your shelf can safely hold 100 lbs. If you’ve got a two foot shelf attached to two studs, the same goes — it can hold 100 lbs.

What weight can a stud wall support?

Using several screws that are #4 or larger into a wall stud can hold up to 100 pounds or more. You want to make sure they can go at least 1 inch into the stud to be secure. If you are hanging a shelf that will have books on it, this is the perfect hardware.

How much weight can cabinet screws hold?

Cabinet Hanging Screws



The typical overhead cabinet is installed with 3-inch, No. 10, coarse-threaded screws, with a weight capacity of 75 pounds each.

How far should screw go into stud?



The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw’s diameter, or gauge.

What screws should I use to hang cabinets?

To attach the cabinets to each other, use a No. 8 2¼-inch-long trim-head screw with a fine thread suited for hardwood. This fastener’s small-diameter head is unobtrusive, so you don’t have to hide it under a cap or wood plug.

What size screws do I need to hang kitchen cabinets?

Drill and countersink two holes in each of the mounting rails inside the cabinet and drive 2 1/2-inch cabinet screws through the holes. Check to make sure the cabinet is level front to back as well as side to side.

Are cabinet screws stronger than wood screws?

Wood screws typically come with deeper thread. That makes the hold super strong. Not to mention, the unthreaded shank on the head part gives a smooth and tight lock to the wooden parts that you attach. On the other hand, the washer-like head on top of the cabinet screws provides more holding power and safety.

What type of screws are strongest?



BUMAX® Ultra has proven itself as the world’s strongest bolt – in various highly-demanding critical fastener applications around the world where standard fasteners are simply inadequate.