You’ll need a dedicated 220V circuit for the dryer, and then another circuit for the washer and plugs in the room. You can probably extend the existing dryer outlet by converting the existing receptacle into a junction (with blank faceplate) but of course it depends on what you are doing with that space after.

Can I move the location of my washer and dryer?

The cost to relocate washer and dryer hookups can run up to $2,000 depending on complexity. Budget roughly $50 to $175 per unit for the simplest, most-straightforward projects. You can hire a local handyperson for the job, but you may need an electrician to install new outlets.

How hard is it to move a washer and dryer?

Considering the fact that many washers and dryers weigh upwards of 200 pounds or more, we highly recommend hiring professionals to handle the relocation of your appliances. In addition, moving a washing machine and dryer often involves taking certain safety precautions (think: possibly having to disconnect a gas line).

How far should a washer and dryer be from the wall?

around six inches

It’s ideal to have around six inches of space behind your washer and dryer. A periscope dryer vent can save space behind the dryer. The dryer is able to sit closer to the wall because of this.

How do you move a washing machine with few feet?

Quote from the video:
Quote from Youtube video: So what I did was use some furniture polish spray on stuff spray some on the floor. And this makes it effortless to push the appliance in and out.

Can I move my washer and dryer upstairs?

To relocate your washer and dryer, you must have a floor that can support the weight and vibrations of the machines. The space must also include a four-prong electrical hookup for the dryer, water hookups and drainage for the washing machine.

Is stacking washer and dryer a good idea?

Can you stack a front-load washer and dryer on a pedestal? According to research, placing a stacked unit on pedestal is not safe and it impedes accessibility. So, it can’t be done. This is yet another reason for you to consider other options for your laundry area.

Can one person move a washing machine?

Moving a washing machine or moving a washer and dryer combination requires preparation and planning. Washing machines need to be disconnected and drained properly before a move. Washing machines can also be quite heavy. Although it is possible to move a washing machine by yourself, it’s safer and easier to get help.

How much does an average dryer weigh?

between pounds

A typical dryer weighs between pounds. The exact weight will vary by make and model.

How can I lift my washing machine by myself?

Move the hand holding the leg stand at the front to the corner at the back, so you’re holding both sides. Lift the washing machine and let it rest on your leg. Pull the appliance up to your chest and keep your arms at a 45-degree angle.

How do you lift a dryer on top of a washing machine by yourself?

Quote from the video:
Quote from Youtube video: It goes right up against the washer you disconnect the dryer from behind is usually just four Phillips head screws that you have to remove.

How do you lift a dryer on top of a washing machine?

Squat bent at the knees, and place your hands underneath the dryer. Lift carefully, using your legs rather than your back to pull the weight. Place the dryer on top of the washer. Dryers are heavy.

How do you push a washing machine back into place?

Squat in front of the machine, one foot against the bottom of it for pushing, open the door, grab inside the top of the drum rim, and pull to lift at the back while pushing the bottom with your foot. Job done.

Can you move a washing machine without transit bolts?

Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. Washing machine transit bolts are a vital piece of equipment required to move your washing machine securely. A washing machine is a complex piece of equipment with many moving parts.

How do you level a washer in tight space?

Quote from the video:
Quote from Youtube video: So what I'll do is adjust the leg. So that it's slightly. Lower till it's all it on the ground you can check that by rocking the machine corner to corner. Like.

What happens if your washer is not level?

The wash basket may also spin unevenly if the washing machine is not level. The washer must be level both from front to back and from side to side, and all four of its feet must be touching the ground. If you can rock the machine back and forth diagonally from corner to corner, its feet are not secure and level.

How do I level my washer and dryer?


  1. Pull out Washer. To check the flooring under the washing machine, first fully disconnect the machine. …
  2. Check for Loose Foot Pads. …
  3. Check Flooring Condition. …
  4. Repair Flooring. …
  5. Check Washer Level. …
  6. Settle Washer. …
  7. Prop up Front of Washer. …
  8. Adjust Washer Feet.

Why is my washing machine shaking violently?

Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Try rocking the appliance from side to side or back and forth. If it’s rocking a lot, your flooring or appliance’s feet may be uneven.

Where are the shock absorbers on a washing machine?

All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. The shock absorbers or struts are attached to the base frame and to the outer tub and you will need to remove the front panel or the rear panel to access them.

How do I stop my washing machine from walking?

How to Stop the Washing Machine from Walking

  1. Make sure the washing machine is level. Figure this out with a good old fashioned bubble level. …
  2. Attach some non-slip, anti-vibration pads to the bottom of your washer’s legs. …
  3. Take precautions to balance your washer load every time you do laundry.