YES you can. The 15 A breaker stops the electric current to flow into the washing machine when the amperage exceeds 15 A, however the supply network accepts amperages to flow up to 20 A. The 15 A is the capacity of your machine to work.
Does a washing machine need a 15 or 20 amp outlet?
Washer Receptacle
The 120-volt, 20-amp circuit supplies a receptacle for the washing machine. It is typically wired with 12-gauge, two-wire cable containing a hot wire, a neutral wire, and a ground wire. The receptacle is a 20-amp GFCI receptacle.
Can you plug a 15 amp appliance into a 20 amp outlet?
A plug is an object located on one end of a power cord that connects an electrical device to a receptacle. Most household electrical receptacles have a 15-amp rating, but they connect to a 20-amp circuit. You can use a device that has a 15-amp plug with either a 15- or 20-amp receptacle.
Can a washer be plugged into a 15 amp outlet?
Because of that, all 120V 15 Amp devices are normally designed to work properly in a 120V 15 Amp or 120V 20 Amp circuit. This is true for appliances like a washing machine but even for something as small as a cell phone charger that actually uses < 1 Amp.
Does a washing machine need 20 amp receptacle?
15 or 20 Amp Circuit for Washing Machine: Which is Best? Your laundry room is required to have a 20 amp circuit. This is the circuit where you should plug in your washing machine.
Can I use a 15 amp switch on a 20 amp circuit?
You can, in fact, use a 15-amp switch on a 20-amp breaker lighting circuit since the 20-amp rating means that the circuit can handle anything up to 20 amps, so anything lower is alright to use.
What appliances require a 20 amp circuit?
Kitchens must have at least two 20 amp outlets. These outlets are used to power high voltage appliances such as toasters, blenders, and microwave ovens. The best way to identify a 20 amp outlet is to find the horizontal slot extending from the vertical slots.
What size breaker does a washing machine need?
The right size breaker for washer
To have your home protected, you will need a circuit breaker size of 20 Amps. This sizing accords to the National Electrical Code (NEC) for you to have a 120-volt service in your laundry room protected by a 20A individual designated circuit breaker.
How many amps does a washing machine require?
A washing machine typically uses between 12 and 15 amps of electricity, while a fridge typically uses about half that amount. This means that you can usually have a washing machine and fridge on the same circuit, but it’s always best to check with an electrician to be sure.
What amp does a washing machine need?
Ratings of commonly used household appliances
| Domestic Portable Appliance | Amps Used | Watts Used |
|---|---|---|
| Desktop computer | 1.3 | Up to 300 |
| Television 55” UHD | <0.5 | 120 |
| Games console | 0.86 | 200 |
| Washing machine | 10 | 2200 |
Can you plug a washing machine into a normal socket?
Washing machines do not typically need special electrical hookups, but some large household appliances do require 240-V outlets. Most electric stoves and dryers and some washing machines require the higher voltage to operate. Most washing machines will run on ordinary 120-V household outlets.
Can you plug a washer into a regular outlet?
Standard household electric power in the United States is 110 to 120 volts, with a 60-cycle alternating current, and most household washers can be plugged into wall outlets supplying this current.
Is a GFCI required for a washing machine?
There is no specific requirement in the NEC for the washing machine itself to have GFCI protection. Section 210.52(F) requires a receptacle outlet to be installed for the laundry area and it must be supplied by a 20-ampere branch circuit in accordance with 210.11(C)(2).
Should a washing machine be on its own circuit?
That beautiful washing machine needs to be on a 120-volt 15 or 20-amp receptacle, on its own circuit. The outlet should be placed out of reach and directly behind the machine.
Why does my washer keep tripping the GFCI?
To narrow this problem down, there are three places that could be causing the GFCI to trip, a malfunction in the washing machine, a problem with the downstream wiring (aka load side of the GFCI), or the GFCI outlet itself.
Do laundry room outlets need to be GFCI?
A GFCI is needed for outlets powered by single-phase branch circuits rated at 150 volts or less to the ground that is connected to a 125-volt to 250-volt line. For garages, bathrooms, crawl spaces, laundry rooms, basements, and other places where water is present, GFCI receptacles must be installed.
What is code for outlets in laundry room?
A laundry room needs at least one 20-amp circuit for receptacles serving laundry equipment; this circuit can supply a clothes washer or a gas dryer. An electric dryer needs its own 30-amp, 240-volt circuit wired with four conductors (older circuits often have three conductors). All receptacles must be GFCI-protected.
