Show activity on this post. You can only remove a chimney if it isn’t being used and won’t be used in the future. Heating system and hot water can be replaced with Direct Vent unit(s), which can take in fresh air and exhaust combustion gasses through PVC tubing running out the side of the building.
Can you fully remove a chimney?
Full or Partial Removal? Removing a chimney isn’t as simple as getting rid of the visible stack. This part is only a tiny portion of the actual chimney structure. A full removal involves getting rid of the entire structure and often leads to extra space in rooms where the breast is intruding.
Can you remove a brick chimney?
Chimney removal often requires at least two people. Removing a chimney stack is a long process because it must be done brick by brick. A full demolition typically takes up to five days, while removing a chimney stack only may take one-half of a day to two days.
Can I replace chimney with pipe?
Decades of rain, snow and wind deteriorate the bricks much more quickly than the bricks that lie below the roof. Once the chimney is torn down, you can then install the stainless steel chimney liner inside your remaining chimney to connect directly to the connector or stove pipe of your appliance.
Is it worth removing a chimney?
But there are reasons to have your chimney removed. Chimneys require maintenance like anything else, and if they don’t get enough of it, they can start to cause problems with things like insulation, leakage, and even structural concerns—nobody wants a chimney stack to fall on their head.
Does removing a chimney devalue a house?
They offer a traditional and cosy feel that’s attractive to many homebuyers. Therefore, if you remove your chimney, you’re likely to remove what many consider an asset. This will result in your home’s value decreasing.
Do I need planning permission to remove a chimney?
Planning permission is required when: – removing the shared chimney stack (and pots) on a party wall. These tend to be external, above the roof level, and part of the character of the street, and therefore covered under the Town and Country Planning Act 1990.
How expensive is it to remove a brick fireplace?
Unfortunately, taking out a brick fireplace and chimney, especially on a potentially load-bearing wall, is no small task. You’re looking at a minimum of $10,000 for that kind of work. It’ll be a big task, involving at least a couple of dumpster loads of waste and a week or more of work in your house.
How do you know if a chimney is load-bearing?
How To Tell If A Fireplace Is Load-Bearing. A general rule of thumb to see if a wall – or fireplace – is load-bearing is to check how it aligns with floor joists. If the wall runs parallel to the joists, it is less likely to be load-bearing.
How do you permanently close a chimney?
Quote from Youtube video: But just make sure you put a generous bead of silicon caulk all the way around the rim. And you will be able to get a nice bond. Between the chimney and the metal.
Do I need a structural engineer to remove a chimney breast?
NB You are always likely to require the services of a Structural Engineer if you intend on removing the chimney and breast. If you don’t get an expert involved, you risk serious structural degradation to your property which might result in the building collapsing which carries the risk of death.
Are chimney breasts load-bearing?
When you take out a chimney breast, you are also removing an important load-bearing wall. Because of this, you will need to ensure the structural integrity of your building isn’t put at risk – which means you need expert guidance and approval from your council to be certain the job is done safely.
Do you need a party wall agreement to remove a chimney breast?
Removing a chimney breast is fine if you are taking it out all the way through, right up to the chimney stack, if they have only removed it on one level (say downstairs) then they would have to put steels in to take the weight of the chimney stack above, so then they would need party wall agreement.
Can you remove half a chimney stack?
you can not remove half of a shared chimney stack because the brick work is all tied in together and removeal of your half of the stack will cause it to become unstable.
Can you take out a chimney breast wall?
External chimney stack removal can be done from outside the building and, if done carefully, need not disrupt any internal decoration. An internal chimney breast can be removed at ground and/or first floor without having to remove the external stack.
How do I remove a brick fireplace?
Quote from the video:
Quote from Youtube video: And I'm just going through and just popping these bricks out I was afraid to just take the sledgehammer to it because I didn't want to damage the remaining bricks here.
What supports a chimney breast?
The lintel holds the roof space chimney breast in position. A photograph of such a traditional support arrangement, which provides adequate structural stability, is seen beneath.
Can you remove just downstairs chimney breast?
If you intend removing the chimney breast from downstairs only, you’ll need a stronger lintel than if you removed everything up to loft level. Usually, a structural engineer will specify a Rolled Steel Joist (RSJ) at every level to support the floors and ceilings as well as the remaining chimney breast.
How long does it take to remove a chimney breast?
It takes, on average, about four to eight hours to remove just a chimney stack, one and a half days to remove a chimney breast, whether on the ground floor or first floor, two to three days to remove an entire chimney breast while leaving the stack in place, or three to four days for the same work but with the chimney
