AFIK the current NEC prohibits this. A GFCI protected receptacle in a bathroom cannot be on a circuit with receptacles not in that bathroom or in other bathrooms. However, the lights and exhaust fan can be on a circuit with lights or receptacles in rooms other than a bathroom.
Can you split a GFCI outlet between two circuits?
There are no “splitable” GFCI receptacles that I am aware of. The Canadian equivalent to the NEC is similar in many parts the way that kitchen counter top receptacles are wire are very, very different. At SelfHelp forums there is a folder specifically for Canadain electrical code.
Can I add an outlet from a GFCI outlet?
You can replace almost any electrical outlet with a GFCI outlet. Correctly wired GFCIs will also protect other outlets on the same circuit. While it’s common to find GFCI outlets in bathrooms and kitchens, there are GFCI outlet requirements.
Can you run a GFCI off another GFCI?
You can daisy-chain GFCIs if you really want to. They will still protect just fine. But you have more annoyance dealing with trips… because all the GFCI’s will trip, and you will have to do more walking to find and reset them all.
How do I run another outlet off of my GFCI outlet?
Quote from the video:
Quote from Youtube video: Side the hot wire that doesn't have power and the corresponding neutral will be connected to the load. Side and that load side will protect the outlet past the gfci. Turn off the power to the circuit.
Can you pigtail GFCI?
Ground Connection
If the GFCI’s electrical box is metal (not plastic), you must join two pigtails (short lengths of wire) to the circuit ground wires and connect one pigtail to the outlet ground screw and one to the metal electrical box.
Can you half switch a GFCI outlet?
No. GFCIs receptacles cannot be switched, nor can they be split. Best bet is to use a GFCI breaker in the panel, then you can use regular receptacles that you can split and switch, and everything will be protected.
Can you daisy-chain outlets?
You can daisy-chain a GFI just like a regular receptacle, with one difference. The incoming wires must connect to the “line” terminals while the outgoing wires must connect to “load.”
How many outlets can you add to an existing outlet?
You Can Use Another Electrical Outlet When:
(Don’t make matters worse by adding yet another outlet to the circuit.) Electrical codes restrict the number of lights or electrical outlets that can be connected to one circuit. Typically, you can have no more than eight lights or electrical outlets on a 15-amp circuit.
How do I wire a receptacle from a light outlet but keep it hot when light is off?
In this case, you must change the cable from the switch to the light outlet from a 2-wire to a 3-wire cable. As you can see, connecting a receptacle to the light would see the receptacle only hot when the light switch is on.
How do you piggyback an electrical outlet?
Quote from the video:
Quote from Youtube video: So if you don't have these fancy connectors you have to make a a pigtail. And put them all under a wire nut now the white's on the silver. Side the black is on the brass. Side.
How do you tap into an existing electrical outlet?
1) Turn off the power, remove the cover plate, and unscrew the receptacle. 2) Pull the receptacle out of the box and remove the wires attached to its terminals. 3) Use a screwdriver to pry out a knockout. 4) Outside, have a helper drill through the siding.
Can a GFCI outlet be connected to a light switch?
Electrically there is no problem with powering the light with the hot and neutral feed to the GFCI receptacle. You could use pigtails to the receptacle line (and not use the load connection) and to the light switch so the lights would’t go out if the GFCI receptacle tripped.
Can the outlets in a bathroom be on the same circuit as the lights?
No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles. For example, a one-family dwelling has two bathrooms and a duplex receptacle has been installed in each. One 20-ampere branch circuit can supply power to both bathroom receptacles but cannot feed anything else.
Can you feed a switch from a GFCI outlet?
In general, yes. GFCI outlets have LINE and LOAD terminals. You can connect several more outlets on the LOAD terminals, and they will also be protected from ground faults. You can also add a switch, though bear in mind that highly inductive loads (like a large motor) can cause nuisance tripping of the GFCI.
