Can flexible duct be used for a range hood? No. Avoid flexible duct for your range hood, regardless of the CFM.

What is the best way to vent a range hood?

The best option is to vent vertically through the roof if possible, since hot air rises. But this is not required. Vent through a side wall if you cannot vent directly above your hood. To have a smooth installation, find a great contractor to install your ductwork.

Can I replace metal duct with flexible?





Metal duct can still be found in many older homes, but flexible duct is more prevalent in newer homes. Both work well. Still, should you decide to change from metal to flexible duct, don’t waste money on an HVAC contractor. It’s a time-consuming job, but definitely one you can do yourself.

What is the disadvantage of flex duct?

The downside of flex ducting is that it is considered temporary with an acknowledged lifespan of only about 15 years. Another major disadvantage is that they are a little too flexible, so they are often incorrectly installed. And with greater friction than metal ducts, proper sizing is critical.

Can you vent a range hood with PVC?

Can you use PVC duct for a cooker hood? We don’t recommend using PVC duct for your range hood. It’s not nearly as durable as aluminum or stainless steel ductwork.

Does a range hood have to vent outside?

Range hoods do not have to be vented to the outside. You can purchase hoods without ductwork called ductless hoods. But, ducted range hoods are almost always preferred over ductless hoods.

Should kitchen exhaust duct be insulated?





You can insulate your vent hood duct, but it’s not required. Insulating your vent hood duct will keep the noise down and keep your greasy kitchen air from escaping into your joists and attic.

Is metal ductwork better than flex ducts?

Flex ducts are better for existing trunk-and-branch heating and cooling systems. This is because they’re more versatile and flexible. Metal ducts are more rigid due to the nature of steel, making them ideal to build an entire HVAC system.

Does Flex duct reduce airflow?

If you’ve ever seen kinked or sagging flex duct and wondered whether that was a problem, you were onto something! Since flex duct, by definition, is flexible, it often flexes in ways we don’t want it to. The result is poor airflow and ineffective HVAC systems.

How do you connect a flex duct to a metal duct?

Quote from the video:
Quote from Youtube video: Take the black side of the band your gun to the neck of the duct. And this is going to ratchet tie it and then clip it once it's tightened.

Can you use plastic ducting for cooker hood?



PVC ducting is the cheapest one available, but is highly versatile and can be used in the majority of general ventilation connection applications, including cooker hoods.

What CFM do I need for range hood?

A range hood fan should move a minimum of 100 CFM of air for every 12 inches of stove width. This means that if you have a stove that is 30 inches wide then you need a range hood with a fan that rotates at least 250 CFM of air.

What is code for a range hood?

Although the international CFM code for range hoods is 100CFM, some local authorities allow for range hoods with slightly lower or higher CFM than this, depending on the type of your cooking, and the square footage of your cooktop.

Is 400 cfm enough for a gas range?



To power your range hood, you need at least 100 CFM for every 10,000 BTUs of your stovetop. For example, a 100,000 BTU stove needs at least a 1000 CFM range hood. For electric stoves, multiply the stove width by 10. So, for a 42” electric stove you want a range hood with at least 420 CFM.

Is it code to have an exhaust fan over a stove?

Is a range hood required by code in California? In California, vent hoods are required that produce 100 cfm or more intermittently or produce 5 air exchanges in one hour. This is required in all residential areas, remodeled homes, or areas that are 1000 square feet or larger. Check out the full report here.

What is a ductless range hood?

Unvented Range Hoods: An unvented, or ductless, range hood has a fan but no duct. Instead, it uses several types of filters to clean the air, and then recirculates the air into the kitchen (these models are sometimes called recirculating hoods).

Do ductless range hoods remove smoke?

A ductless (or ventless) range hood does not vent out of the home, instead, it carries the debris and smoke form the air and filters it through a charcoal or carbon filter before releasing it back into the room. While many times this method is not as functional as a vented hood, it does work.

Do ductless vent hoods work?



Yes. However, they are not as efficient as ducted range hoods that vent kitchen air to the outside of your home. Ductless range hoods use charcoal filters which trap some grease and odors but are not as effective as the stainless steel baffle and mesh filters of ducted range hoods.

Can a ducted range hood be converted to ductless?

A recirculating kit is an accessory for converting ducted range hoods to ductless or recirculating. It consists of a stainless steel vent and charcoal filters. Install the kit on top of your range hood to vent or recirculate air back into your kitchen.

What type of duct is best for venting a range hood?

Rigid duct

Rigid duct is the best type of duct to vent your range hood. It requires a one-time installation and little to no maintenance as long as you clean your range hood filters. Most rigid ductwork is made from durable stainless steel, as opposed to rigid ductwork which is aluminum or flimsy plastic.

Do you need a recirculating kit for a ductless range hood?



Do I Need a Recirculating Kit for My Hood? There is no need for installing recirculating kits in ducted range hoods since unwanted air from the kitchen is vented to the outside. Ductless range hoods filter the air in your kitchen without the need for a kit as they are designed for the same purpose.