Can XHHW be used in conduit underground?
What is Type XHHW Wire? XHHW-2, or XLPE High Heat-Resistant Water-Resistant, Wire is a general-purpose wire suitable for use in conduit, raceways, feeders, and branch circuits. It is also often found in power distribution systems in industrial, commercial, and residential buildings.
Is XHHW-2 conduit rated?
XHHW-2 is rated up to 90° C in both wet and dry environments. THHN is rated up to 90° C in dry environments only. Dual-rated THHN/THWN carries a 75° C wet-environment rating.
Is Ser rated for underground?
We’ve seen each of these projects employ Aluminum SER cable as a service entrance, but it’s important to understand that SER is only suitable as an above-ground service entrance cable.
What type of wire can be buried in conduit?
THHN and THWN-2 Copper Building Wire is only approved to be buried in conduct, as it lacks the characteristics that would make it eligible for direct burial. UF-B and USE-2 are the standard direct burial cables.
What is difference between XHHW and XHHW-2?
THHN/THWN-2 is a thermoplastic product, while XHHW-2 features thermoset insulation.
HOW TO KNOW THE DIFFERENCE.
| THHN/THWN-2: | XHHW-2: |
|---|---|
| T = Thermoplastic | X = Cross-Linked Polyethylene (XLPE) |
| HH = High Heat Resistant | HH = High Heat Resistant |
| W = Water Resistant | W = Water Resistant |
| N = Nylon Jacket | (Not Required) |
What is XHHW-2 wire used for?
Often used as building wire XHHW-2 can be used in power circuits run in conduit from the utility meter to main circuit protection panels. It can also be used in conduit from circuit protection panels to uses throughout a building. Some other uses are machine tool wiring, appliance and control circuits.
Is it OK to run Romex in conduit?
No, you can not run your Romex wiring in conduits. What you’re looking at in the code book is referring to THHN and other wiring, that while insulated with a single coat is not insulated with a second covering and bound to 2 or 3 other wires.
Is THWN-2 rated for direct burial?
THHN wire can be used in a conduit but is not rated for direct burial alone. Our 8 awg THHN is also THWN-2 dual rated which means this conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90° C or not to exceed 75°C in oil or coolants. It is rated for 40 amps @ 60°C.
